Jump to content

Recommended Posts

Posted

All the under hood reflective material near the after treatment has to be upgraded. Also likely would need either 3.42, or 3.73 gears.

As it is now the exhaust brake doesn't make enough back pressure at current GCWR to be super helpful. Likely would need upgraded exhaust valve springs.

It will likely come with the 2022 refresh which is getting the Tahoe interior, and GM's all-new Global B electrical architecture.

Sent from my SM-N975U using Tapatalk

Posted
1 minute ago, topgear1224 said:

All the under hood reflective material near the after treatment has to be upgraded. Also likely would need either 3.42, or 3.73 gears.

As it is now the exhaust brake doesn't make enough back pressure at current GCWR to be super helpful. Likely would need upgraded exhaust valve springs.

It will likely come with the 2022 refresh which is getting the Tahoe interior, and GM's all-new Global B electrical architecture.

Sent from my SM-N975U using Tapatalk
 

Thanks for the info.....Sounds like I might have to hold out for 2022...lol

Posted

There must be a reason why there is no 'official' public info about the 2021's yet,

 

It's past the usual production change-over date. 

 

The 2021 full size suv's have gm website info and are showing up at dealers.

The 2021 canyon/colorado info is on the gm websites.

 

There are few (2020) 1500 pickups at dealers. If 2020's were still being built, they'd still be showing up.  Dealers in this area are very short on supply.

 

 

I think the 2021's are embargoed, and info about them is embargoed, and journalist reviews about them are embargoed -- so that they can have pickups (multiple trims, multiple powertrains, multiple cab/box versions) positioned for all 5000+/- dealers in N.A. to have vehicles to show soon after the info is released. 

 

Interior refresh 2021. 

Outside refresh 2022.

 

Posted



There must be a reason why there is no 'official' public info about the 2021's yet,
 
It's past the usual production change-over date. 
 
The 2021 full size suv's have gm website info and are showing up at dealers.
The 2021 canyon/colorado info is on the gm websites.
 
There are few (2020) 1500 pickups at dealers. If 2020's were still being built, they'd still be showing up.  Dealers in this area are very short on supply.
 
 
I think the 2021's are embargoed, and info about them is embargoed, and journalist reviews about them are embargoed -- so that they can have pickups (multiple trims, multiple powertrains, multiple cab/box versions) positioned for all 5000+/- dealers in N.A. to have vehicles to show soon after the info is released. 
 
Interior refresh 2021. 
Outside refresh 2022.
 


The covid production stop on a truck that was discounted up to $15k off is why the supply is so short.

2021 building begins in September because of covid.
https://gmauthority.com/blog/2020/07/2021-silverado-1500-to-gain-three-new-editions/amp/

Sent from my SM-N975U using Tapatalk

Posted

Wouldn't be the first time the folks a gmauthority misinterpreted information that they uncovered. 

 

Maybe that's the reveal date, when they magically show up at all the dealers....

 

Yes, all this is just speculation on my part.

(We gotta do something for entertainment, since GM isn't releasing any info...)

 

 

 

Posted
On 8/19/2020 at 10:59 AM, beauso79 said:

Thanks for the info.....Sounds like I might have to hold out for 2022...lol

What are you trying to tow that the 9k rating is limiting you?  You'll run out of payload before you exceed your tow rating.

Posted
11 hours ago, redwngr said:

There must be a reason why there is no 'official' public info about the 2021's yet,

 

It's past the usual production change-over date. 

 

The 2021 full size suv's have gm website info and are showing up at dealers.

The 2021 canyon/colorado info is on the gm websites.

 

There are few (2020) 1500 pickups at dealers. If 2020's were still being built, they'd still be showing up.  Dealers in this area are very short on supply.

 

 

I think the 2021's are embargoed, and info about them is embargoed, and journalist reviews about them are embargoed -- so that they can have pickups (multiple trims, multiple powertrains, multiple cab/box versions) positioned for all 5000+/- dealers in N.A. to have vehicles to show soon after the info is released. 

 

Interior refresh 2021. 

Outside refresh 2022.

 

They've already announced no interior refresh for 21'.  It will be 22' for a facelift and interior refresh.

  • Like 1
Posted
Wouldn't be the first time the folks a gmauthority misinterpreted information that they uncovered. 
 
Maybe that's the reveal date, when they magically show up at all the dealers....
 
Yes, all this is just speculation on my part.
(We gotta do something for entertainment, since GM isn't releasing any info...)
 
 
 
Already spoken with insiders, no refresh for 2021.

Sent from my SM-N975U using Tapatalk

Posted

they have a cure for this issue.....2500 HD

  • Like 1
  • 2 weeks later...
Posted

Keep in mind GM is ultra conservative trailer waiting and has pushed for an industry standard with no luck.  The ratings are established based up the capability of a 7% grade on I70 called Ike Gauntlet.  Look it up.  Not saying you should exceed the Published recommendations, but be informed how they are established.

Posted (edited)

I’m wondering at what point do profits of a beefed up 1500 compare to those of a 2500/3500. If the profit margins on a 1/2 higher than that of a 3/4 ton I could see wanting to squeeze out more towing capacity for other than marketing purposes. But if a 3/4 ton profit margins are greater than a 1/2 ton then the more capacity these executives, I mean engineers ?, give the the 1/2 the more likely they eat into the need for and sales of the 3/4 ton. Very interesting dynamic from a business operations standpoint. 

Edited by Duramax3oh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...