Jump to content

2017 Silverado no power won’t turn on /no dash lights

Alexm2017

By Alexm2017
in Troubleshooting & Recalls

 Share

Recommended Posts

Alexm2017 New Member

Alexm2017

Posted
Posted (edited)

Hello everyone I’m having a problem with my 2017 Silverado it’s a 5.3 regular cab short bed. About 2 days ago I was going to work in the morning I was hit with the low battery charge on the display . so I got my truck jumped it kicked on everything normal . I get to work and I turn it off later I come back to start it nothing no dash lights I can turn the key and it clicks once . I call triple a we get a new battery in there nothing battery is fine . All my accessory lights work button unlocks / locks . Hazards work and taillights but only one of my headlights turn on . Has anyone had this issue before or know what it might be I’m kind of lost and don’t know much about electrical thank you !

Edited by Alexm2017
Added more info
babyj713 Enthusiast

babyj713

Posted
Posted

Sorry this happened to you, but it is pretty normal. The stock batteries suck if you still have one. I just replaced my 2017 battery  last year, the build date of my truck was from October 2016 so my battery lasted roughly 3years.

 

I had similar symptoms.. one day out of the blue no start or inadequate starting. No power, battery looked good but when I replaced it with a new battery everything was fine. Haven’t had a problem since. 
 

My recommendation would be just buy a good battery with decent warranty from your preferred retailer. 

  • Like 1
ATXchevy Enthusiast

ATXchevy

Posted
Posted

I just went through something similar. Check your mega fuses off the battery terminal that sits on top of the battery. I had no power to any of my fuse boxes. No power inside cab (dash, gauges, radio etc.) Door locks worked and one headlight - didn't look at tail lights. Good luck! 

  • Like 1
  • Thanks 1
Alexm2017 New Member

Alexm2017

Posted
  • Author
Posted
On 9/25/2020 at 11:48 AM, ATXchevy said:

I just went through something similar. Check your mega fuses off the battery terminal that sits on top of the battery. I had no power to any of my fuse boxes. No power inside cab (dash, gauges, radio etc.) Door locks worked and one headlight - didn't look at tail lights. Good luck! 

Wow amazing man thank you so much this was actually the cause of it ! Same exact symptoms where I circled with yellow on that picture there was no power going there so I unscrewed the nut , and touched the cable to the tab on the left and I hear chimes in the cab horn went off ! Also had the wifey hold it meanwhile I tried to start it and it did glad to know this was just it was thinking about the big bill Already haha 

2CE7A220-49F6-4B2B-AEDD-58E02AE76DE9.jpeg

  • Like 1
  • 1 year later...
  • 1 year later...
Zocky New Member

Zocky

Posted
Posted

Hello,

 

I came back from a month's vacation and my 2017 Silverado is experiencing the same issues. No power to dashboard, no crank....one headlight turns on, fob locks and unlocks vehicle, turning signals work. I replaced the battery...nothing.  All fuses are good in cabin and under hood. I did notice one of the terminals on large fuse sitting on battery is not getting any voltage to it. However, I hard wired across it and still nothing happened. 

 

Any advice would greatly be appreciated. 

Shane Donahue New Member

Shane Donahue

Posted
Posted (edited)

Zocky, I was frustrated with this all day and finally figued it out. One headlight coming on, no power at all. Look at the above picture. See the black ground wire? I popped the bolt out and stuck it in the hole just above it, tightened the ground to that hoe and it started right up. Gotta force it a bit due to the stupid plastic, or you can saw it off. Hope this helps

 

 

Edit: quick check before you go through the trouble.... If it doesn't spark on the current terminal and does on the one above it, that's the issue. How I figured it out.

Edited by Shane Donahue
mikeyk101 Senior Enthusiast

mikeyk101

Posted
Posted
1 hour ago, Shane Donahue said:

See the black ground wire? I popped the bolt out and stuck it in the hole just above it, tightened the ground to that hoe and it started right up. Gotta force it a bit due to the stupid plastic, or you can saw it off. Hope this helps

 

Just for clarification, I don't think that's a ground wire. I know that these trucks are known for problematic grounds but that black wire is bolted inside the power center so pretty sure it's just another positive wire. Bad things can happen if a ground wire is accidentally connected to a positive source....

Shane Donahue New Member

Shane Donahue

Posted
Posted
10 hours ago, mikeyk101 said:

 

Just for clarification, I don't think that's a ground wire. I know that these trucks are known for problematic grounds but that black wire is bolted inside the power center so pretty sure it's just another positive wire. Bad things can happen if a ground wire is accidentally connected to a positive source....

You could be right. However, my truck has been working fine since. I'm going to the dealer to have them check it today and I'll report back.

  • Like 1
Zocky New Member

Zocky

Posted
Posted

Thank you guys for reply. I'm still dealing with this problem. If you look at the attached image, I have circled one of the prongs that reads no voltage. All the other locations have full voltage except this one? The kicker, there is no accessory or cable attached to this location. I think its only a bolt and nut to secure fuse to housing. 

IMG_7539.jpg

  • 4 months later...
Vicente Monteagudo New Member

Vicente Monteagudo

Posted
Posted
On 9/28/2020 at 12:13 PM, Alexm2017 said:

Wow amazing man thank you so much this was actually the cause of it ! Same exact symptoms where I circled with yellow on that picture there was no power going there so I unscrewed the nut , and touched the cable to the tab on the left and I hear chimes in the cab horn went off ! Also had the wifey hold it meanwhile I tried to start it and it did glad to know this was just it was thinking about the big bill Already haha 

2CE7A220-49F6-4B2B-AEDD-58E02AE76DE9.jpeg

 

  • 2 months later...
MDB022190 New Member

MDB022190

Posted
Posted

I have a 2014 chevy crewcab LTZ an I hav been having issues with when I go to start it goes black no power at all no light can't even charge my phone. An I did hav my grounds redone ab 2 mo the ago an now it's doin it again but if I move my ground around the lights turn on but then I need a jump start 

 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 4/22/2024 at 4:38 PM, MDB022190 said:

I have a 2014 chevy crewcab LTZ an I hav been having issues with when I go to start it goes black no power at all no light can't even charge my phone. An I did hav my grounds redone ab 2 mo the ago an now it's doin it again but if I move my ground around the lights turn on but then I need a jump start 

 

We are sorry to see you are experiencing concerns with your 2014 Chevrolet and would like to investigate this further for you. Please send us an email to [email protected]. Be sure to include your Username and Forum name in the subject line with additional details. We look forward to hearing from you. 

  • Confused 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...