Jump to content

Recommended Posts

Posted

Reference Number: GCUS-9-11418

 

2021 Model Year Full Size Truck & SUV Feature Change

 

June 7, 2021

 

Chevrolet, GMC and Cadillac Dealers:

 

As promised, we want to continue to keep you in the loop regarding the global, industry-wide shortage of semiconductors.  Today, due to this shortage, we are announcing a new change to select full-size SUV and light duty full-size pickup truck powertrains.  The Automatic Stop/Start feature will no longer be available on certain 2021 model year:

 

  • Chevrolet Tahoe and Suburban
  • GMC Yukon and Yukon XL
  • Cadillac Escalade and Escalade ESV
  • Chevrolet Silverado 1500
  • GMC Sierra 1500

 

This affects only vehicles equipped with 5.3L (L84) and 6.2L (L87) V8 engines mated to 10-speed transmissions (MQB/MQC) starting with vehicles produced on or after June 7, 2021. By taking this measure, it will enable continued production and delivery of inventory to help respond to the strong customer and dealer demand for our full-size SUV and pick-ups as the industry continues to rebound and strengthen.

 

For orders with a scheduled production date on or after June 7, 2021, GM will build most full-size SUV and full-size pickup trucks equipped with a V8 engine and 10-speed automatic transmission with the added RPO code NSS- Not Equipped with Automatic Stop/Start (refer to the updated Order Guide and table below for trim details). This RPO code will be reflected on the Dealer Invoice along with an associated $50 MSRP credit.  The Monroney label will include this credit and indicate that the vehicle was built without Automatic Stop/Start.  These vehicles will also receive revised EPA certified fuel economy estimates.   Please note that any vehicle that has NSS is not equipped with Automatic Stop/Start technology, even if the vehicle also includes the KL9 RPO code (which was retained based on other components that remain on the vehicle). Chevrolet, GMC and Cadillac are updating all consumer and dealer facing materials as appropriate.

 

Any sold orders of these affected vehicles which have not been entered in the Production Order Management and Scheduling system by June 8, 2021, will be built without Automatic Stop/Start.  The dealer has the responsibility to and must advise affected sold order customers immediately. In addition, dealers are strongly urged to counsel directly with all customers who purchase affected vehicles to ensure each customer understands its vehicle content and efficiency.  This change to the availability of Automatic Stop/Start is currently expected to remain in place for the remainder of the 2021MY.  A listing of affected trims is listed below and is subject to change by General Motors:

  • Like 2
Posted

I will gladly donate the electronics to any Chevy dealer willing to take this horrible "feature" off my truck.

  • Like 4
Posted
3 hours ago, BossTaco2020 said:

I will gladly donate the electronics to any Chevy dealer willing to take this horrible "feature" off my truck.

Same!!!  LOL

  • Like 1
Posted (edited)

I'm very eager to see the revised MPG estimates without Auto Start/Stop (ASS). [Pun intended]

I have never thought ASS would improve mileage much, so I already wonder how much the EPA will influence what manufacturers are allowed to publish.

 

Edit: I'm definitely not a fan of ASS and turn it off every time I start my truck. And I'm considering the eliminator harness as well (reverses the default from on to off).

 

https://www.autostopeliminator.com/collections/gm/products/2019-silverado-sierra-autostop-eliminator 

Edited by Chevrolet1
  • Haha 1
Posted

Ass doesn't help the mileage but it "can" make for a fun ride

Posted

I don't even care how well it works. I'm not a fan. I'd gladly donate the related electronics for mine, as well.

 

Dangit...missed the cutoff for DFM delete and ASS delete. NOW they decide to make these trucks right....sheesh

Posted

So all jokes aside, what are the details on this?  Is this a chip that can just be removed or is there a new chip they're using that just doesn't have this feature?  I know I can get the eliminator, but if there's a factory method for just removing something that sounds safer and easier.

Posted
On 6/11/2021 at 10:46 AM, Chester Mooney said:

So all jokes aside, what are the details on this?  Is this a chip that can just be removed or is there a new chip they're using that just doesn't have this feature?  I know I can get the eliminator, but if there's a factory method for just removing something that sounds safer and easier.

Probably not as easy as you want it to be. If the chip or the module that controls ASS is not there they probably changed the program to not function. In other words GM probably turned that feature off in the program. Now if you were to do the same. Remove the chip/module yourself. I bet it would throw codes and your check engine light would come on. Because the program would trying to use that system but the controller you removed is not there. 

Posted (edited)

If this carries over into the 2022 model year I may look to trade my 2021 in just to get rid of S/S.   Since AutoStop is such as great feature I assume my truck will be worth a premium on trade.  LOL

Edited by elcamino

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,859
    Total Members
    8,960
    Most Online
    needafix
    Newest Member
    needafix
    Joined
  • Who's Online   5 Members, 0 Anonymous, 590 Guests (See full list)

  • Latest Articles

  • Posts

    • .30” of rain all month and it’s been weeks since that. “Mowed” our two properties today for the first time since July 2nd. It only took 30 minutes because all I had to do was level some weeds and saplings in a few problem areas. Everything else is dead.
    • Dealer reported a failed shifter module assembly so the whole shifter is getting replaced. Yet another premature repair… up to $12,000+ in extended warranty payout in only 5 years and 80,000 miles! 
    • According to the dealer it’s an internal leak/failure of the compressor.  Again, another failure that shouldn’t happen at only 5 years and 80k miles.  For some reason the compressors must be hard to come by right now, because the truck’s been at the dealer almost a week and they just located a compressor at another dealer several states away today.  We’ll see if this fixes the issue.  
    • I'm not sure if this should be a reply on this thread or a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - ACDelco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles. When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so i did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance.
    • I wasn’t commenting on your post. Certainly wasn’t arguing. I was making an observation on my long term experience with supposedly proper length of driving for proper heat cycles. Works for me. Although I have seen water or vapor come out of exhaust when vehicles weren’t run very long and shut off. It’s very humid in the morning. Then hot and humid. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...