Jump to content

7-way plug issues

Shawn O'Leary
 Share

Recommended Posts

Shawn O'Leary Enthusiast

Shawn O'Leary

Posted
Posted

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

RocksRock Enthusiast

RocksRock

Posted
Posted
20 minutes ago, Shawn O'Leary said:

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

Hi Shawn:

I pull a large equip trailer. It was plug and play, no problems.
 

I used to pull a 26’ Passport. I would check fuses on RV and truck first. 
If all good there, then dealer. 
Hope this helps. 

Shawn O'Leary Enthusiast

Shawn O'Leary

Posted
  • Author
Posted
7 minutes ago, RocksRock said:

Hi Shawn:

I pull a large equip trailer. It was plug and play, no problems.
 

I used to pull a 26’ Passport. I would check fuses on RV and truck first. 
If all good there, then dealer. 
Hope this helps. 

Didn't think of the fusebox (slapping my forehead). Will check that next before taking it in. 

slj2008 Senior Enthusiast

slj2008

Posted
Posted

Why didn't Airstream check them out when you hook up ??   ON my 2015 the cables were laying by the Fuse Box ( under hood ) one for 12volts power , and the other for all your lights . CHECK your main Fuse box under hood.

EddDe Enthusiast

EddDe

Posted
Posted
12 hours ago, Shawn O'Leary said:

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

Download TSB 20NA198 at this link. There is a problem with 2019 models where light circuit will overload if too many incandescent bulbs are on a trailer. Issue was changed on 2020 models to allow more amps.

https://www.carcomplaints.com/Chevrolet/Silverado_2500/2020/tsbs/tsb-20na198.shtml
 

Dmax3 Enthusiast

Dmax3

Posted
Posted

I've gotten "no trailer connected" notice a few times.  The truck receptacle does move in the mount, but the dealer told me it's normal and they couldn't replicate my issue.  I'll double check my trailer wiring, but pretty sure it's the truck, not the trailer.

LSMAN New Member

LSMAN

Posted
Posted

I have an Airstream as well. (On my 4th one).  When I purchased my truck remotely in march 2020  and the dealer delivered it (2020 RST) , There was no brake controller for towing. I made it very clear that I have an airstream and the sales guy apologized for mistake. His boss allowed him to purchase an aftermarket controller for me. it was ordered and sent to me-  I installed it. Looks factory. (I installed something similar an  aftermarket controller in my 06 Silverado for my 1966 Airstream)

Sorry if I missed the obvious here but does your truck have a factory brake controller?  If not you need one. If it does have a controller her is what I would do: 

Check the grounds on both the trailer and the truck.  Bad Grounds cause most problems.  With trailer unhooked from truck use a 12 volt battery and power up the trailer lights individually: running lights, brake lights electric brakes. Verify that the problem is not on the trailer side first. make sure that you do not power up the emergency brake pull. If engage for long period powering this will burn up that (plunger switch with cable.) LED lights will not cause the above problem.

  • 4 years later...
Colin Wayland New Member

Colin Wayland

Posted
Posted
On 1/21/2022 at 11:53 AM, Dmax3 said:

I've gotten "no trailer connected" notice a few times.  The truck receptacle does move in the mount, but the dealer told me it's normal and they couldn't replicate my issue.  I'll double check my trailer wiring, but pretty sure it's the truck, not the trailer.

 

On 1/16/2022 at 5:03 PM, Shawn O'Leary said:

They did, it's the truck not the trailer. Fuses are present and all good. Going to the dealer Tuesday. 

What ended up fixing your issue Shawn? My grandpa is experiencing the exact same issue and cannot figure it out. Thanks.

Colin

davester Senior Enthusiast

davester

Posted
Posted

...just fyi, both Shawn and DMax haven't logged onto the site since around when this thrad was active, 4 years ago.  you aren't going to get a response from either user...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • davester
      Disconnecting Battery

      By davester · Posted

      If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • davester
      Disconnecting Battery

      By davester · Posted

      It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • BCGM
      Remote Start Noise 2024 2500 HD Gas

      By BCGM · Posted

      JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...