Jump to content

Recommended Posts

Posted

Fairly new to posting here, so please let me know if this question would do better in another spot. I have a 2017 Sierra 1500 SLT. About 2 years ago when it was hot out,I started my truck, and the dash started flashing through all of the warning signs(seat belt, air pressure, pretty much every warning). None of my gauges worked on the dash, but my infotainment system worked, and my lights, including blinkers, on the outside worked. After running it for about ten minutes, it like reset itself and the dash started working. It was under warranty at the time, but only happened once. Now, my truck is no longer under warranty, and it happens every single time it's hot outside. The dealership said they'd have to keep my truck for awhile to let it mimic the issue, and I know they will charge me out the ass just to find the problem, before asking for a couple grand to fix it. Considering it only happens when it's hot, I feel like something is expanding and making a connection issue. Has anyone had any experience or heard of this? I would greatly appreciate any advice on what to look for it how to test the issue. I did use a tester while it was doing it last time, but no codes came up. I'm really confused. 

Posted

Check battery condition/charge. Check battery cables and connections. Check body ground connections

Posted

If the instrument panel is the only problem and everything else is fine. the truck runs, windows work, headlights work running lights  work, etc...

 

Then I would remove the instrument panel and check the connector, If I'm not wrong is just one connector that goes to the ECM, so there are not to many problems to check.

 

I just looked at the GM schematic and it does show just one direct connector to the ECM

Posted
2 hours ago, lovecars said:

If the instrument panel is the only problem and everything else is fine. the truck runs, windows work, headlights work running lights  work, etc...

 

Then I would remove the instrument panel and check the connector, If I'm not wrong is just one connector that goes to the ECM, so there are not to many problems to check.

 

I just looked at the GM schematic and it does show just one direct connector to the ECM

Will the GM schematic show me exactly what I need to look at? I'm at work, but I'll definitely check the suggestions when I get home. 

Posted

No it's just the schematic, with no other info

 I can count all wires going into the ECM. And I can see that all those signals go to the display. But if there is a problem with for instance with the engine temp it goes to the ECM and then sends the info to the display

So the first thing to see is the back of the display.

Search you tube for a guy installing a Denali instrument panel and he shows how to get to it to remove it... if I find the type of connector and the wires I can give more info.

If you are used to working on old cars these are totally different and what you think can go wrong it's not.

All wiring on these trucks handle network wiring that send signals to and from to modules to do the work, if the module returns a fail then the computer either will try again or set a code. The trucks from 2224 and up will use ethernet network like all of office or home computers. There is a reason why, but I can write a.book about it...

 

Posted

Ok thanks! I'll look for the video and where to find the ECM. Is there a way to test and see what's bad?

Posted

Do you remember what year the guy is working on? There's a few videos dealing with the instrument panel, but each one looks a little different. 

Posted

I found the connector, but can't tell if anything's wrong. Here's what I'm wondering, I got a stereo system hooked up when I first got my truck. I'm not sure exactly how they ran the wires, but it looks like they went into this under my dash, because there's electrical tape on it. Is it possible that isn't getting a good connection when it heats up outside and messes with it? The radio doesn't ever cut out though

228FAFD4-E55D-44A8-A6FC-4F7F0CEB06B1.jpeg

Posted

Also, I'm not sure what these are for, but one of those red clips was popped down in the position to disconnect it. I wonder if that, or something else is loose, and when it heats up outside they separate a little. That's the only thing I can think of since it only happens when it's hot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Looking up on the web you can the information that would seem obvious. You asked engine components to do more. You get more wear. The answer is they can last just as long but required more maintenance. Apparently having to change lifters, cam and associated components are maintenance or repairs. In some research the normal life span of valve train components are 80-100 miles with 3-5K miles oil change. So the next logical conclusion would be cost per mile. I use that analogy with my wife all the time with vehicles. My Odyssey is approaching 170K. The cost per mile will go up at 200K with maintenance. Looking at a low cost car. A K-4 with a 10-10 warranty. Selling my Ridgeline that’s about to hit the same maintenance milestone. My argument becomes not only I get worry free driving. But at no cost increases. Because I take the money from my Ridgeline and maintenance savings and other potential savings. I’m driving for free. So tying it with a bow. It makes you wonder. Is this a grand conspiracy by the auto makers? Raise the potential maintenance high enough. Buyers by extended warranty to 100K miles. Do the minimum maintenance required. Trade in at the warranty end. How long should they last? That question is what keeps people up at night. The answer is much more complicated than it used to be.
    • Could you cite your source on this?  I cannot find any reference to the US secretly taking the oil.  I find references that the US helped oil tankers move through the Strait of Hormuz, but nothing about what you're stating.  
    • Same thought, also the everything doesn't have the details real photos do (talking about the noise in the photo)
    • Since the media YOU and your buddies are programmed to watch failed to mention this, I'll fill you in.   Trump admitted today that we've grabbed 150 MILLION barrels of oil from the Iranian tankers locked in the Strait by our Navy. We turned off their transponders, took them out to sea in the dark of night since they have zero radar capabilities anymore, offloaded every drop onto another vessel, and put them back by morning so no one was the wiser. That oil has been en-route THROUGHOUT the entire conflict.   Main reason he admitted this is to let even guys on our own side who joined leftists in complaining about the prices that he hears us all, and has taken steps to make sure this didn't spiral into a BAD situation ... just like the mainstream media has been PRAYING would happen, just so they could gloat. Amazes me how these people are rooting for the destruction of THEIR OWN HOME, just to make a President they don't agree with or like look bad! That's next level TDS!   I know your not capable of giving our President the benefit of the doubt, again due to your deep programming, but THIS is why oil never hit $150 a barrel as predicted by your programmers, AND the reason oil continues falling. Like I said before, Trump's got a plan, and this is proof of it. By the end of his term, we're going to be in GREAT shape for a change!   Since I just spent $3,000 this week on #2 heating oil and gasoline, the war most certainly is ending! 🤣   https://mxmnews.com/article/ba359ac9-2711-4851-92de-187f2400f2dd?breaking-trump-cancels-iran-strikes-deal-now-approved-by-all-parties
    • No leaks. Replaced the condenser 3 years ago. Problem was found to be caused by the A/C blend door actuator. Just replaced it and it's blowing out the cold air it used to when I bought it. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...