Jump to content

Recommended Posts

Posted

Tried replacing my reverse light bulb today.

Someone said you can't because they're led's, and I didn't know what he meant.

But it appears to be one sealed unit that you cannot replace bulbs on.

Is a bulb replacement really going to cost $500+ (I'm guessing).

Posted
5 hours ago, steve8 said:

Tried replacing my reverse light bulb today.

Someone said you can't because they're led's, and I didn't know what he meant.

But it appears to be one sealed unit that you cannot replace bulbs on.

Is a bulb replacement really going to cost $500+ (I'm guessing).

No you cant replace the bulb on your 23 Denali. It sucks but LEDs are supposed to last for many many thousands of hours.

We will see.

Posted (edited)
20 hours ago, steve8 said:

Tried replacing my reverse light bulb today.

Someone said you can't because they're led's, and I didn't know what he meant.

But it appears to be one sealed unit that you cannot replace bulbs on.

Is a bulb replacement really going to cost $500+ (I'm guessing).

 

 

There is no bulb to replace.  

Edited by newdude
Posted
8 hours ago, steve8 said:

I was wrong about price. 
ONLY $230!

Absurd!!

Well alrighty then, get two of them so you have a spare. 🤭

Posted

To be clear.

I get it. It's a sealed unit and you cannot replace a bulb.

But if your brake light bulb part fails (used most often) you're on the hook for well over $200.

This is an improvement?

Not imo.

Posted
32 minutes ago, steve8 said:

To be clear.

I get it. It's a sealed unit and you cannot replace a bulb.

But if your brake light bulb part fails (used most often) you're on the hook for well over $200.

This is an improvement?

Not imo.

 

 

Keep going.  Retail price on one single OEM tail lamp is $698.28 for a 2023 Denali.  

  • Sad 1
Posted

I’ve seen them for $200/ea now that Ive looked in a few places. 
still crazy. 

Posted (edited)
11 minutes ago, steve8 said:

I’ve seen them for $200/ea now that Ive looked in a few places. 
still crazy. 

 

 

You aren't finding a new one at that price, that's for sure.  If you are, not OEM.

Edited by newdude
Posted
4 hours ago, newdude said:

 

 

There is no bulb to replace.  

Curious.  Do the 2022+ Refresh have a different taillight assembly than the 2019+ ? The 2019 New Body to 2022 LTD you could change the reverse light bulb to led but nothing else in the assembly.  

Posted
15 hours ago, SilveradoRST said:

Curious.  Do the 2022+ Refresh have a different taillight assembly than the 2019+ ? The 2019 New Body to 2022 LTD you could change the reverse light bulb to led but nothing else in the assembly.  

 

 

Yes, but, OP has a Denali.  Denali has had full LED tail lamps since the T1 came out in 2019.  

Posted
11 hours ago, newdude said:

 

 

Yes, but, OP has a Denali.  Denali has had full LED tail lamps since the T1 came out in 2019.  

Ah ok.  Learned something new.  Thanks!

Posted

My '23 LTZ has LED tail / brake lights but a normal incandescent reverse light bulb. I installed CAN bus LED's in it, no issues in 18k miles now. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...