Jump to content

Recommended Posts

Posted (edited)

Parents had a wreck in trailblazer(someone in the other car pulled out across two lanes in front of them, and admitted fault).

Airbags did NOT deploy. They were going about 40 MPH at impact. Thinking the air bags should have gone off. They side the back corner of a g37 coupe and it's airbags did. Think at least the passenger should have gone off on TB? Parts of the impact was almost to the center of the bumper.

 

e568a5299a9bad049c1ea4f2e2a53b82.jpg

5addb268c14d4f4df63c8df2818de5b7.jpg

6e7911e1576730d0885e24030fd781ed.jpg

 

Sent from my LG-H810 using Tapatalk

Edited by SnakeEyes
Posted

I think I've been to that one. Nebraska on I-80? I can't even remember it's been so long ...

Posted (edited)

Parents had a wreck in trailblazer(someone in the other car pulled out across two lanes in front of them, and admitted fault).

Airbags did NOT deploy. They were going about 40 MPH at impact. Thinking the air bags should have gone off. They side the back corner of a g37 coupe and it's airbags did. Think at least the passenger should have gone off on TB? Parts of the impact was almost to the center of the bumper.

 

..

..

..

 

Sent from my LG-H810 using Tapatalk

Not surprised. Think a lot of them are defective. After I parted out our total POS '00 Jimmy, I had some buddies over and tried to light the thing off with a length of wire, and a battery. It was a total dud. Glad we didn't find that out behind the wheel!

 

Neighbor gets at least one GM product a year for the demo derby here. She's had 1 or 2 fail to light off too.

 

Are your parent's ok?

 

So many idiots out on the road today, it's just amazing ... :nonod:

Edited by Jsdirt
Posted

I think I've been to that one. Nebraska on I-80? I can't even remember it's been so long ...

Iowa 80 TA west of davenport nearer to Illinois

Posted

240 watts ... holy crapper that thing must blaze like the sun! I'd get thrown in jail running that in MA, lol.

288

 

Sent from my SM-G925V using Tapatalk

Posted

Not surprised. Think a lot of them are defective. After I parted out our total POS '00 Jimmy, I had some buddies over and tried to light the thing off with a length of wire, and a battery. It was a total dud. Glad we didn't find that out behind the wheel!

 

Neighbor gets at least one GM product a year for the demo derby here. She's had 1 or 2 fail to light off too.

 

Are your parent's ok?

 

So many idiots out on the road today, it's just amazing ... :nonod:

Think they are ok(said they are but since it can take time...), but my mom has serious medical issues and said her back felt odd during the rebound.

Posted

To me that damage looks minimal for that speed.

Posted

Got smog check notifications today for 2 registrations due November 2nd. My truck is due November 30 so i am hoping it comes soon. It is every 2 years. It will give me a chance to get it done and hopefully get my broken manifold bolts pulled and long tubes installed before the SEMA Show

Posted

Iowa 80 TA west of davenport nearer to Illinois

 

Ahh yeah now I remember. Been 15 years since I set foot in there.

Posted

To me that damage looks minimal for that speed.

I'm guessing the guy floored it and his G37 just didn't make it away.

 

And his rear side air bags did go off. (hit the back/back corner, think opposite of the TB). His back bumper fell off.

 

 

Think I'll get them a dashcam for Christmas! :lol:

Posted

Lost 3 hours last night pulling the front end off my truck to change out a headlight!!!!!!! I think that who ever came up with this brain child should be required to go and change out at least one in every state on their own dime. Also I would make sure and have them do it in the grass somewhere at night!!!!! Can you tell that I am al little up set about it all? I went ahead and bought all the bulbs and changed them all out so I should be good for another 4 years and 80,000 miles. The good news is it only took about 1 hour to put it all back together. :jester:

  • Like 1
Posted

Hahaha. They become simple to change after a while. Easiest way depending on side is remove airbox or battery.

I don't bother with them most of the time. Use a screw driver or long pliers to get the socket out of the cranny. And there is minimal slack on those wires.

Did find out the wiring harness is clipped to the back of the headlight when replacing do to deer damage. I pulled that clip off after replace whole headlight giving more slack to the bulb socket.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...