Jump to content

Respect or Disrespect?


Recommended Posts

Posted

How do you feel most people are about your truck?

Do people tend to want to trash talk or race you or do they compliment you and want to check out your truck?

Elaborate with examples, if you wish.

  • Replies 43
  • Created
  • Last Reply
Posted

I have always had compliments from my friends, family, and neighbors. With the exception of a few friends that drive Fords, they like to rib me a bit for my GM. But I do the same thing back to them. :driving:

Posted

Most people are complimentary, and therefore, curious. That said, they usually want to check it out and touch it, which leads to inevitable or unintentional trashing to some minor degree. I keep 'em at bay; went through that with my Corvette.

Posted

Well.. some black guy called me a redneck fagot bc I was in his way at the gas station. Needless to say I was with my wife two children. I just smiled and laughed at him. Just another p*$$y runny his mouth. I'm glad words don't piss me off bc I'm always armed.

Posted

Edit: unintentional double post.

Posted

Well.. some black guy called me a redneck fagot bc I was in his way at the gas station. Needless to say I was with my wife two children. I just smiled and laughed at him. Just another p*$$y runny his mouth. I'm glad words don't piss me off bc I'm always armed.

 

 

Ha...where do you live?

Posted

Most people around me feel their truck is "bigger, better, more powerful, more capable...blah, blah, blah" I shrug it off as I know what my truck's capabilities are and what my truck has already been through in it's lifetime. Worse case, I tell them I will just run into their vehicle and we'll see who starts crying first tends to shut them all down.

Posted

most guys i know well compliment my truck, because they know when i got it it needed body work, some interior work. and i only paid $25k for it, it had very little kms on it but wasnt taken very good care of. i sunk alot of time and money into it, now looks better than most of my buddies newer trucks. i still get the "why didnt you buy a diesel" comment alot. cuz its so hard on fuel lol.

Posted

I get some compliments on my Suburban. They dont believe it when I tell them its a '92 because its in such great shape for an older 4x4 (Well, better shape now since I replaced the passenger side mirror I busted like a jackass :oops: ). People often ask how it is on gas. I tell them its quite fond of gas and if they would like to donate some, it would be very happy.

Posted

I get a lot of compliments. Except for the Prius drivers whos cars are made out of paper clips and recycled soda cans.

 

I get a lot of compliments. Except for the Prius drivers whos cars are made out of paper clips and recycled soda cans.

Posted

I get a lot of compliments. Except for the Prius drivers that are made out of paper clips and recycled soda cans.

 

That would mean those cars are made of metal. I thought they were fiberglass & bubblegum...lol

Posted

The girls like the color of the truck....smile...

 

With the guys it depends on what they are driving. Is it a different brand like Dodge than they are talking like "why didn't you buy a Dodge...?...it's way better..." and so on.

It also depends on the year their trucks were made. Owner of older cars almost always appreciate my truck.

 

so long

j-ten-ner

Posted

people say to me .......cough ,cough,cough "holy shit your truck smokes alot " i say back "phuck off its an old diesel ok " !!!!!!

 

lol

Posted

I get compliments most time on my truck by strangers, but the only time my truck gets snubbed is by Ram Hemi owners they seemed to have there heads up there asses, they all think there trucks are better and faster, these are guys I work with I'm talking about. There are alot of Ram Hemis at work.h

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Any update if the new valve cover help with the oil consumption?  I have a 2014 GMC sierra and my truck is consuming a lot of oil so I’m wondering if replacing the driver side valve cover will stop some of the oil consumption. Thanks 
    • I bought belts and pulleys for my '20 L5P at Rock Auto a couple years ago. I have used them for many years, and almost always save significant money, especially when I buy maintenance stuff ahead of time.   They carry many OEM parts, which is all I use unless an aftermarket is shown to be same/superior, or if it is an insignificant part or unavailable OEM part anywhere else. RA is usually lower priced, often by a bunch, but parts are sometimes unavailable or out of stock, and I do shop around and sometimes find better prices at other sites.   Be aware that you pay shipping, and if you buy multiple items and they are coming from different warehouses, the shipping can kill the advantage. Planning ahead is best if possible.   If you have a transmission service in the near future, check out their OEM (AC Delco ULV) fluid, usually MUCH less than anywhere else.
    • New member here, very long time occasional guest. Saw this thread, thought it would be a good time to contribute someting. It is only my experience and not a claim that everyone will have the same.   I bought my '20 3500 L5P new and have put 99.9% (literally) of it's current ~400k miles on it myself, with over 50% of that towing loads between 4k to 15k, and to me this truck has been nothing short of amazing. For the first 235k I had zero issues, and from there until 321k I replaced a NOx sensor, two failing glow plugs, and three of the notorious injector connectors. I believe this truck is in part, a testament to good luck, but also good care and following a decent maintenance schedule (I also keep meticulous records.) As a result, it looks as good as a well cared for 70k rig, up and down, inside and out.   At some point before that 321k mile mark I began to get a little spooked about the 10L1000, especially the valve body. Word of mouth about potential issues prompted me to jump on the net to sift through all the noise and determine what all the fuss was about. I routinely take long trips, coast-to-coast and points in between, so roadside breakdowns can be '...a thousand miles from nowhere' and a bit of a challenge, and though I had no issues, my guard was up and activated.   And then I stumbled across a chance to salvage some parts off a new 2025 that had been wrecked in transport. I grabbed a few wear items (alternator, pulleys, etc.) and on a whim asked what the ten speeder would cost me. It was cheap...really cheap. I knew some changes had been made in the '24+ version 10L and were supposedly not compatible, but I called service/parts at my local Chevy dealer and asked why and they didn't know. A call to a well known aftermarket transmission outfit revealed it was very likely it would be fine, but to them not 100% sure.   Because it was cheap (really cheap) and I was spooked, I took the chance. Had it installed by a local shop and it worked like a champ, shifted just like the original. At it's first service at 37k, I had the shop put in a Next Gen valve body kit, which after some initial hiccups and rough shifts, smoothed out though with somewhat firmer shifting.   All that said, I have a very serious concern about my newer transmission as just two weeks ago it suddenly began to exhibit a strong reluctance to engage forward or reverse. It was a bit past due anyway so I took it in for service. The reason it was sticking was due to 'glitter' in the fluid clogging the filter...not good folks, often indicates a converter giving out. We ended up going ahead with the new filter and fluid, first to see if it would move and shift, and then if so buy me a little time. It did, and I've driven it over a thousand miles and it is shifting smooth, no noises or slipping. Regardless, it looks like a third gearbox is in my future so I can resume taking long trips with some confidence. In the very short term, my curiosity will have me examining the fluid to check how much glitter has reappeared.   An earlier poster had alleged, in the context of 10L100 failures, that it is another example of how we seasoned citizens somehow descend into hysteria, lose control of our senses, and react irrationally after brief encounters with the idiocy of the internet infosphere. Let me say (and I have used and abused said internet since it's infancy) there is no segment of the populace that has a corner on over-reaction to digital garbage. Just as my offering of experience in this arena is purely anecdotal and should not be considered gospel or all-encompassing, I believe it is still worthwhile information to consider, along with other relevant anecdotal experiences about things like complex transmissions, especially when balanced with other sources.   So to answer the original question, yes I got high miles out of my first 10L, trouble free for 321,000. Now I really wonder how much longer it would have went. Did I 'overreact' to the internet ghouls by replacing a 'good' one with a 'bad' one? Maybe. Who knows, the thing might have taken a puke a 100 miles later. So I'll just fix it again, then move on and start thinking about all the other stuff that will eventually wear out. It still has the original brakes (they're at ~60%), original injectors/pump, turbo, water pump, etc....pretty much original everything. Knock on wood.
    • At peak temperature.  They get to cool down and warm up more, especially those with the external cooler.  I have three GMT900s and one of them has over 225K on its original transmission.  Fluid gets changed about every 36K miles, all of it.     It's not the bean counters, it was the government.  They had to meet CAFE standards and other government requirements.   To get around that, we tune them and modify them to our liking.
    • Our customers' safety isn't something we take lightly. To ensure you get the proper assistance for your truck's repairs, please fill out the form at https://s.chevy.com/support-request with all pertinent details including your username.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...