2014+ Suspension Lifts

fuse36 · February 25, 2015

Great looking truck! Do you rub at all?

also wanting to know if there was any rubbing. Also how is the ride

Sent from my iPad using Tapatalk

fuse36 · February 25, 2015

Fabtech 4" lift, 295/60/20 trail grapplers on 20" BMF REPR's

want my setup like this. How is the ride, bouncy smooth etc...? Also was there any rubbing

Sent from my iPad using Tapatalk

Mike1220 · February 25, 2015

20x9 not sure on backspace. Thanks for the info.

Sent from my iPad using Tapatalk

Just checked, a 20x9 at +18 offset is 5.71" backspacing so you should be able to fit the 35" on one of those kits

EDIT: honestly I don't think you'll get a response from Brettles. I tried PMing him a few times in October and haven't heard from him. Also I don't think he has posted in several months. And he did have to do a fair amount of trimming if I remember correctly. Pretty sure I've seen pictures of the trimming somewhere on here

Edited February 25, 2015 by Mike1220

fuse36 · February 25, 2015

Just checked, a 20x9 at +18 offset is 5.71" backspacing so you should be able to fit the 35" on one of those kits

EDIT: honestly I don't think you'll get a response from Brettles. I tried PMing him a few times in October and haven't heard from him. Also I don't think he has posted in several months. And he did have to do a fair amount of trimming if I remember correctly. Pretty sure I've seen pictures of the trimming somewhere on here

ok Ya his 295 60 20 tire is about 34" which I like the look. So maybe if I go with at least a 4.5" lift I'll be fine

Sent from my iPhone

using Tapatalk

sawyer_dowell_3 · February 25, 2015

ok Ya his 295 60 20 tire is about 34" which I like the look. So maybe if I go with at least a 4.5" lift I'll be fine

Sent from my iPhone

using Tapatalk

I've got the Zone 4.5" lift with 295/60/20 20x9 and -12 offset. only rubs when backing up. but if you had a positive offset you probably wouldnt have any problems. the ride is a little more firm than stock but not rough by any means. bds makes zone so still a good product. and cheaper. i'd recommend it! hope this helps ya!

Michael94 · February 25, 2015

Currently have 7 inch Rough country lift on my 2014 Silverado. Local guy has a set of used fabtech coilovers 7-9 inch which were for 07-13 with very little use.. Would this setup work on my 2014 and would it improve ride over the strut spacers ? Or would it just be a waste of 500$?

TB3546 · February 25, 2015

I tried searching, but has anyone installed a Ready Lift 4" SST lift kit on the new 14s or 15s? I'm looking into a lift but don't really want to cut the frame.

Mike1220 · February 25, 2015

I tried searching, but has anyone installed a Ready Lift 4" SST lift kit on the new 14s or 15s? I'm looking into a lift but don't really want to cut the frame.

I know iicoolbreeze has one on his Denali. Try messaging him.

Sent from my iPhone using Tapatalk

fuse36 · February 26, 2015

I've got the Zone 4.5" lift with 295/60/20 20x9 and -12 offset. only rubs when backing up. but if you had a positive offset you probably wouldnt have any problems. the ride is a little more firm than stock but not rough by any means. bds makes zone so still a good product. and cheaper. i'd recommend it! hope this helps ya!

how much u think about hat 4.5" zone will cost

Sent from my iPhone

using Tapatalk

fuse36 · February 26, 2015

I've got the Zone 4.5" lift with 295/60/20 20x9 and -12 offset. only rubs when backing up. but if you had a positive offset you probably wouldnt have any problems. the ride is a little more firm than stock but not rough by any means. bds makes zone so still a good product. and cheaper. i'd recommend it! hope this helps ya!

u probably posted but show me a pic of your truck

Sent from my iPhone

using Tapatalk

seansharley · February 26, 2015

I tried searching, but has anyone installed a Ready Lift 4" SST lift kit on the new 14s or 15s? I'm looking into a lift but don't really want to cut the frame.

I took my rc3.5 off, and did the ready lift 4 SST. Much smoother over speed bumps.

TB3546 · February 26, 2015

I took my rc3.5 off, and did the ready lift 4 SST. Much smoother over speed bumps.

You have any pictures?

seansharley · February 26, 2015

Sure do.

Katgromr · February 26, 2015

Is there any lifts that do not require modifying the truck, basically so I can return to stock. I'm looking for a 4" lift, someone said pro comp but I read it does require cutting. First time posting, been lurking for the past two weeks.