OUSux Posted March 26, 2014 Posted March 26, 2014 275 65 20 is the tallest possible with a leveling kit 2
lockey14s Posted March 26, 2014 Posted March 26, 2014 Does anyone know if the LTZ rims are the same size as the 5 spoke 20's i have on mine? (width, offset) I have the RC 2.5 lift and want to do 305/55R20 terra grapplers on the stock rims. not worried about a little rub at full turn
Cmillerjr Posted March 26, 2014 Posted March 26, 2014 Thanks, I'm going to go with the 275/60/20's (33's) It would be really close to hitting with the 275/65's. It might fit but I'm not willing to take the chance. I was looking through the pics if the guys running the same setup with the 33's looks good to me.
Cmillerjr Posted March 27, 2014 Posted March 27, 2014 I have the 2.5" RC lift with 275/60R20 Cooper at/3, I measured before and after, the lift and tires gained me 3" lift in the front and 1.5"-2" in the back. Keep in mind that all tires in 275/65R20 size are LT tires. Many P tires are available in 275/60R20 size. I have the 2.5" RC lift with 275/60R20 Cooper at/3, I measured before and after, the lift and tires gained me 3" lift in the front and 1.5"-2" in the back. Keep in mind that all tires in 275/65R20 size are LT tires. Many P tires are available in 275/60R20 size. That's a heck of a difference in price, almost $100 per tire. I'm thinking I'll be just fine with the 275/60's.
Vandne Posted March 27, 2014 Posted March 27, 2014 Here's my 2014 Denali 1500 with Ready Lift levelling kit, BMF wheels and Toyo 275-60/20" tires. Sent from my iPhone using Tapatalk 3
Connman Posted March 27, 2014 Posted March 27, 2014 (edited) Here's my 2014 Denali 1500 with Ready Lift levelling kit, BMF wheels and Toyo 275-60/20" tires.Sent from my iPhone using Tapatalk Any rub? Did you do the 2.5" with the 1 inch lift block for the back or just the 2" up front? Edited March 27, 2014 by Connman
full_throttle Posted March 27, 2014 Posted March 27, 2014 Im going with the 2.25" readylift up front and nothing in the back. I have 275/65/r20 toyo at ii tires to go on. I am really hoping they will fit with no rubbing. I dont want to trim anything. It hard to get comparisons from here because lots of guys are using the rough country lift. Anyone else go the readylift route? I think they are a better made product.
KUUG Posted March 27, 2014 Posted March 27, 2014 Im going with the 2.25" readylift up front and nothing in the back. I have 275/65/r20 toyo at ii tires to go on. I am really hoping they will fit with no rubbing. I dont want to trim anything. It hard to get comparisons from here because lots of guys are using the rough country lift. Anyone else go the readylift route? I think they are a better made product. My opinion on leveling kits is brand really doesn't matter. When you get into suspension its a whole other story. I've installed readylift on a different truck and it was just like the rest...
tanner709 Posted March 27, 2014 Posted March 27, 2014 I agree KUUG but I was a little unimpressed to see the rough country 2" front level blocks were a composite material and not aluminum or other type of metal. It is on my truck and I haven't had any issues but piece of mind is worth a lot sometimes. I'd opt for the solid aluminum level blocks next time, but no name doesn't matter - just quality and material.
KUUG Posted March 27, 2014 Posted March 27, 2014 I agree KUUG but I was a little unimpressed to see the rough country 2" front level blocks were a composite material and not aluminum or other type of metal. It is on my truck and I haven't had any issues but piece of mind is worth a lot sometimes. I'd opt for the solid aluminum level blocks next time, but no name doesn't matter - just quality and material. That was my first thoughts also. After I talked to a couple people that ran them for quite a while I decided to give them a try. Some of those ebay aluminum blocks are weaker than composites now a days; given those aren't usually name brand.
Vandne Posted March 27, 2014 Posted March 27, 2014 I am just running the Ready Lift levelling kit which gives a total of 2.25" of lift up front (1.5" from the top spacer and .75" from the bottom one). I have no lift in the rear, all stock. No rubbing at all with the 275-60-20". I'll post better pics once the roads dry up and I clean it.
Nemo39 Posted March 28, 2014 Posted March 28, 2014 How are you guys finding the ride quality, after putting the levelling kit on. Looking at getting the readylift at the end of the month.
MR. DRAG SLEDDER Posted March 28, 2014 Posted March 28, 2014 How are you guys finding the ride quality, after putting the levelling kit on. Looking at getting the readylift at the end of the month. a little stiffer in the front, no change in rear.
Full Lock Posted March 29, 2014 Posted March 29, 2014 Well guys here she is leveled and new skins. I haven't discovered anything rubbing and the ride is incredible over those crappy Goodyears that come from the factory. Leveling Kit was a $40 Ebay 2" level kit, Aluminum spacer. Also New Nitto Terra Grapplers, yes they are wide 305/60/18. The look is awesome compared to factory. Here are the images. Got any questions just ask super clean
Sheaww200571 Posted March 29, 2014 Posted March 29, 2014 (edited) 2.25" ready lift level, 295/55 nitto trails Edited March 29, 2014 by Sheaww200571
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now