Jump to content

Recommended Posts

Posted

 

I really should have gotten the AT Sierra... lol.

I'm pretty happy with the truck. I wish I would have gotten a Duramax to be honest though to avoid re-gearing, don't have to worry about losing much power with lift and big tires, and to fit larger tires with less lift.

Posted

I'm pretty happy with the truck. I wish I would have gotten a Duramax to be honest though to avoid re-gearing, don't have to worry about losing much power with lift and big tires, and to fit larger tires with less lift.

 

I should have, I had a 2014 Ram Cummins outdoorsman and it was a beast and the mileage was amazing compared to any gas vehicle I've driven. But since I stopped hauling so much I decided on the 1500 for now and the more I see these All Terrains the more I love them. I see tons of Sierras around here but rarely an AT.

Posted

2015 Silverado crew cab 4x4 .. Purchased stock ..

 

New add ons just installed this past week

 

7-9" mcgaughy lift set to 9" with rear add a leaf 1.5" ss kit

Custom grill and hood scoop painted to match

37x13.50r24 fuel mud tires

24x12 fuel maverick rims with center powder coated to match paint

Extang solid fold 2.0 cover

Dual exhaust

Complete regear from stock 3.08 to 4.88 front to back with duragrip posi track

Diablo t1000 tuner

N-fab chrome side steps

54" curved light bar arrived today and will be installed this week

What are the details on the grille? Is it a full replacement that mounts the same as factory or an overlay?

 

Sent from my SM-G900P using Tapatalk

Posted (edited)

12DA004B-0AE4-4102-A195-B6B7B1F30189_zps

Dayum... Very nice Wheels and Tires... I had some Wide wheels and tires (305/50/R20) on my Avalanche which really set it apart from others... Any Rub Issues?

post-140277-0-91575900-1456497951_thumb.jpgpost-140277-0-62655800-1456497978_thumb.jpg

post-140277-0-91575900-1456497951_thumb.jpg

post-140277-0-62655800-1456497978_thumb.jpg

post-140277-0-91575900-1456497951_thumb.jpg

post-140277-0-62655800-1456497978_thumb.jpg

post-140277-0-91575900-1456497951_thumb.jpg

post-140277-0-62655800-1456497978_thumb.jpg

Edited by Mcarlo24
Posted

What are the details on the grille? Is it a full replacement that mounts the same as factory or an overlay?

 

Sent from my SM-G900P using Tapatalk

 

 

You have to use some of the fittings (backing) from the oem grill

Posted

Okay.. really need help.. which one?

 

attachicon.gifIMG_0956.JPG

 

I am partial to Chrome so CHROME! If you are going to keep the Chrome Trim, Handles, Etc, go with the Chrome...

Posted

Im new to the group, Here is my 2016 All American Black Edition LT in Tungston. I love everything about this truck.

12788490_10208621205186090_1896117314_o.

Sharp truck!
Posted

Im new to the group, Here is my 2016 All American Black Edition LT in Tungston. I love everything about this truck.

12788490_10208621205186090_1896117314_o.

 

Looks good! Digging the wheels with the chrome front end

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...