Jump to content

Center console swap?

quickvert1

By quickvert1
in Modifications & Accessories

 Share

Recommended Posts

thrasher2010 Enthusiast

thrasher2010

Posted
Posted

Just got an update from GPC, the souls have my console in by end tomorrow or Wednesday at the latest and then hey will ship it out to me.. Can't wait, I've been waiting for almost a month for all of these parts for the console..

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

darkfox1
darkfox1

OK.. mine's in.   Here's a writeup, cos I haven't seen one so far.   1. remove the "ash tray" and cig. ligther in your dash with 3 t-10 torx screws, and 2 clips. 2. Remove the radio trim, clips i

dla
dla

I always wanted a RCSB with buckets and a center console...   Received and installed mine yesterday. Very straight forward, thanks for all who posted instructions and part numbers.   Possibly to h

o7bodybagged
o7bodybagged

Finally the console is complete now ready for the install and see what other problems I run into

Posted Images

DeePa Enthusiast

DeePa

Posted
Posted (edited)

post-61280-0-67504800-1418138062_thumb.jpg

post-61280-0-43893300-1418138063_thumb.jpg

post-61280-0-50680100-1418137815_thumb.jpg

 

 

Whats the difference between the denali and non-denali console? I'm looking to do this after winter.

 

I have the cocoa interior. Looking to get a parts list ready.

 

I have the weather tech over the hump floor liner...I'm wondering If i can install the console over the mat? Maybe I'll need to trim slightly?

 

I am also confused on what panel to buy...they have a lot of options. I need to take a picture of the interior.

 

Insights? You guys know your shit.

Mike

 

 

post-61280-0-50680100-1418137815_thumb.jpg

post-61280-0-67504800-1418138062_thumb.jpg

post-61280-0-43893300-1418138063_thumb.jpg

post-61280-0-50680100-1418137815_thumb.jpg

post-61280-0-67504800-1418138062_thumb.jpg

post-61280-0-43893300-1418138063_thumb.jpg

post-61280-0-50680100-1418137815_thumb.jpg

post-61280-0-67504800-1418138062_thumb.jpg

post-61280-0-43893300-1418138063_thumb.jpg

Edited by DeePa
DCazares Enthusiast

DCazares

Posted
Posted

you need this panel

 

http://www.ebay.com/itm/2014-2015-GMC-Sierra-SLT-Console-Upper-Woodgrain-Trim-Panel-OEM-22995109-/191438467387?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c929f313b&vxp=mtr

 

My friend ordered from the same seller and it showed the missing 110v outlet missing like in the picture but she received a new one. So you might have the same luck.

DeePa Enthusiast

DeePa

Posted
Posted

Thanks for your help. I cant find that listed part number on a parts lookup site. It looks like it is just the plate, no cup holders included. What is the color code?

 

The options are :

 

Reverse Tartan
Off Road Carbon

Grand Momiji

Grand Lace Wood

Quilted Maple

Synthesis

Curly Koa

Devenport Wood

Mineral Caster

 

Thanks,

Mike

azctp Enthusiast

azctp

Posted
Posted

Power and ground to the 6 pin connector and USB cable connected to the outlet and HMI control module. There must be some type of communication because I have always on power and ground to the USB outlet. Yet it goes to sleep about ten minutes after key off or opening door. and wakes up when the driver door is opened or key is on.The correct 6 pin connector is very expensive so I just used the terminals and shrink tube to keep from shorting. I would have to find the part numbers for the terminals. The cable I bought ( the only we could find in the GM part catalog ) plugs into the outlet but not into the module without some customizing. Had to shave the connector down with a razor blade.

Hey tbarn, do you have the part number(and pic) for the usb cable mentioned above...my apologies if I missed it in any of your subsequent posts.

Also, you mention that one end plugs into the HMI control module. What is best access to that module, from underneath with console removed? or through front bezel with console in place? or other...? Thanks in advance.

JASLAR12002 Enthusiast

JASLAR12002

Posted
Posted

So I got my console in last night. I have some wiring solutions that I am going to try next week. I ordered a mini sub splitter in attempts to get data and charging working. I am also going to get some new wiring ends male and female wing same number wiring options and use that to see how it works. I had to buy the Denali console since it was the only one available. It is the exact same only difference is the wiring harness that I have found

DCazares Enthusiast

DCazares

Posted
Posted

Nice, if you can document your progress with pictures it would be really helpful. I should have mine by the end of this week as well.

jamesdburton New Member

jamesdburton

Posted
Posted

Hey tbarn, do you have the part number(and pic) for the usb cable mentioned above...my apologies if I missed it in any of your subsequent posts.

Also, you mention that one end plugs into the HMI control module. What is best access to that module, from underneath with console removed? or through front bezel with console in place? or other...? Thanks in advance.

 

I had the same question for tbarn, he responded to me with part number 19303328 for the usb cable. The HMI module is behind your glove box.

azctp Enthusiast

azctp

Posted
Posted

I had the same question for tbarn, he responded to me with part number 19303328 for the usb cable. The HMI module is behind your glove box.

Thanks James (and tbarn)!!

jamesdburton New Member

jamesdburton

Posted
Posted (edited)

well, got everything working except for the console light and front usb data (charges only) on the front. I took the old harness, added an additional 12 volt plug and usb power plug to the harness from the new harness and made it into one modified harness. everything seems to work fine.

Edited by jamesdburton
JASLAR12002 Enthusiast

JASLAR12002

Posted
Posted

Popped the front tray off of a new Silverado with factory console today.

Do you have a part number for the male end of the plug that could plug into the female that came with console? Hoping I can get it to work with some splicing

thrasher2010 Enthusiast

thrasher2010

Posted
Posted (edited)

Finally all my parts have are in and will be here Tuesday, I will post pics and any information I can when I get it all installed.. Can't wait...

Edited by thrasher2010
tbarn Senior Enthusiast

tbarn

Posted
Posted

Do you have a part number for the male end of the plug that could plug into the female that came with console? Hoping I can get it to work with some splicing

Are you talkin' the large white/gray connector?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Another 6.2L engine failure!

      By asilverblazer · Posted

      I included the first gen-cylinder de-activation (active fuel management) in my statement.
    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      Hello All!   My 2019 Colorado 3.6 LT, 4WD Crew Cab has approximately 77,500 miles and I recently began experiencing the well-known transmission shudder between about 30 and 65 mph. The problem had worsened to the point that I could no longer attribute it to road conditions - and I had decided to bring the truck to the dealer - when recently, I experienced a sudden loss of power while driving at maybe 40 MPH. Several warning lights flashed, the “Check Stabilitrack” message appeared, and the Check Engine, Stabilitrack, and Traction Control icons remained illuminated. The truck regained driving power, but it stayed in a low gear with unusually high RPMs for the speed. (limp mode?) Because I was only about two miles from home, driving slowly, I was able to make it back and run an OBD-II scan, which showed fault codes U0101, P0700, and U0100. My next trip in the truck was to drive it to the dealer the following day. That trip began normally, but after about a mile I experienced another loss of power, along with the same warning lights and the same “Check Stabilitrack” message. As before the truck remained driveable, but again operated at an abnormally high RPM-to-speed ratio and seemed stuck in a single gear. About a mile later, the dashboard lit up once more, this time displaying “Check 4WD.” Soon after that, I arrived at the dealer. I have verified that the truck still has its original factory transmission fluid, which means it has never received the corrective fluid exchange outlined in GM Technical Service Bulletin #18-NA-355.  That was Thursday of last week and I've heard nothing yet from the dealer.    According to Technical Service Bulletin #18-NA-355 and the build date of my truck, my truck should have the newer LV fluid. I've done a little research and read something about a problem with the wiring harness as well.   Anyone have an insights into this situation?  Thank you!!
    • GMCustomerService
      Damaged Left Rear Bumper & Left Rear Quarter Panel - Repair Questions

      By GMCustomerService · Posted

      Having bumper and other body damages can be very frustrating, especially as a result of a parking lot collision/bump. Our team wants to learn more about the damages to your truck so we can look into ways we might be able to help. When you get the chance, please fill out our support form with more details: https://s.gmc.com/support-request . A member of our team will follow up with you as soon as next available. We want to get you enjoying your truck to the fullest again. 
    • PhilB
      Gas Prices

      By PhilB · Posted

      Did you even read this article?   Even the title of the article says "U.S.-Iran Deal Doesn’t Mean a Swift Return of Oil and Gas Flows"   Remember, crude oil prices are based on FUTURE purchases by the oil companies.  Gas prices are based on FUTURE purchases by the station.  This article stated that many of the oil producing nations have to restart their processes to get the oil produced.  Then the oil has to be shipped to wherever.  And it doesn't get there overnight.  And most of that oil is not coming here. Check out this site:  https://afdc.energy.gov/data/10621   A graph will pop up to show where the US imports their oil from.  Notice that there isn't a lot of import from OPEC and Iraq.  Most of the US import comes from Canada. The US oil produces are selling their oil on the open market, which is why the US fuel costs went up.  So you're correct, the US oil companies are going to slow walk the price downward.
    • GMCustomerService
      Tranmission stays in Low

      By GMCustomerService · Posted

      Having codes and an engine light with no hints on what might be causing it is nothing short of frustrating. How long have these concerns been present? We want to know more so we can look into ways we might be able to help you. When you get the chance, please fill out our support form with additional details on your experience so far. A member of our team will follow up with you as soon as next available: https://s.gmc.com/support-request 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...