Jump to content

Center console swap?

quickvert1

By quickvert1
in Modifications & Accessories

 Share

Recommended Posts

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

darkfox1
darkfox1

OK.. mine's in.   Here's a writeup, cos I haven't seen one so far.   1. remove the "ash tray" and cig. ligther in your dash with 3 t-10 torx screws, and 2 clips. 2. Remove the radio trim, clips i

dla
dla

I always wanted a RCSB with buckets and a center console...   Received and installed mine yesterday. Very straight forward, thanks for all who posted instructions and part numbers.   Possibly to h

o7bodybagged
o7bodybagged

Finally the console is complete now ready for the install and see what other problems I run into

Posted Images

FourThor Enthusiast

FourThor

Posted
Posted (edited)

Well I am officially confused by all these part numbers. Is there any difference between the different year's consoles? Anyone have a 2018 black/white thread, with wireless charging part number? I have been told like 3 different part numbers and it's hard to verify which is correct. 

 

Part number 84199886 is one that @Frank Jr recommended to me because it has the wireless charging lid that comes with it. Think this might be for a 2017 though, I have no way to verify.

Edited by FourThor
zikronix Enthusiast

zikronix

Posted
Posted (edited)
36 minutes ago, FourThor said:

Well I am officially confused by all these part numbers. Is there any difference between the different year's consoles? Anyone have a 2018 black/white thread, with wireless charging part number? I have been told like 3 different part numbers and it's hard to verify which is correct. 

 

Part number 84199886 is one that @Frank Jr recommended to me because it has the wireless charging lid that comes with it. Think this might be for a 2017 though, I have no way to verify.

console.thumb.jpg.49d841fe2d64506798d85a0f51d61de6.jpg

 

Not paying attention to the top wood trim part is this whar you are looking for. Black leather with white thread. this is part number 

84199890 which is what I have has the wireless charging lid and is a few bucks cheaper than
84199886 I got my part number from gmpartdirect and I looked at rpo code options and cross referenced with this list from gmparetsgiant of complete consoles 

https://www.gmpartsgiant.com/parts-list/2017-gmc-sierra-1500-2wd/console-floor-lower.html

 

according to what im seeing the only difference between the consoles is ck1,2,3(43) and ck1,2,3(53) - This might have to do with the double cab/crew cab thing. idk for sure.

 

 

Edited by zikronix
zikronix Enthusiast

zikronix

Posted
Posted
34 minutes ago, Scott Fish said:

I have a 2016 silverado extended cab,  reverse tartan trim.  vin is 1gcvkrec8gz357696

 

thank you for the help

what color are your seats. Ive see cocoa trucks with black consoles with reverse tartan. can you send me the a picture of the rpo codes in your glove box. 

frankinbus Enthusiast

frankinbus

Posted
Posted

Scott Fish ,

Check this out :

2015+ Tahoe Center Console in 2014+ Silverado?

Look for this here , Something is at a angle the front of console 

22884620-2015-gm-suburban-tahoe-sierra-1500-center-console-assy-new-oem-black-22884620-10.jpeg

zikronix Enthusiast

zikronix

Posted
Posted
2 minutes ago, frankinbus said:

Scott Fish ,

Check this out :

2015+ Tahoe Center Console in 2014+ Silverado?

Look for this here , Something is at a angle the front of console 

22884620-2015-gm-suburban-tahoe-sierra-1500-center-console-assy-new-oem-black-22884620-10.jpeg

The SUV CONSOLES WILL NOT FIT THE TRUCKS. 

zikronix Enthusiast

zikronix

Posted
Posted
Just now, frankinbus said:

Correct , If they go to this page and read these posts , They would know ,,

oh ok. every time i clicked it it kept just showing the picture to me...

Johnny01 Enthusiast

Johnny01

Posted
Posted
this is the part most of these threads say to purchase.  there isn't the back trim or arm rest.
image.thumb.png.4e75cfe8376ead82519f456897579369.png
Johnny01: Thanks for the information.

Sent from my SM-G935V using Tapatalk

zikronix Enthusiast

zikronix

Posted
Posted
this is the part most of these threads say to purchase.  there isn't the back trim or arm rest.
image.thumb.png.4e75cfe8376ead82519f456897579369.png
It's there I can vouch for it that's the part number I ordered. That diagram isn't showing it but it is there.

Sent from my Pixel 2 XL using Tapatalk

Johnny01 Enthusiast

Johnny01

Posted
Posted
It's there I can vouch for it that's the part number I ordered. That diagram isn't showing it but it is there.

Sent from my Pixel 2 XL using Tapatalk

Johnn01: what year model and make do you own. And your saying everything is included with it.

Sent from my SM-G935V using Tapatalk

zikronix Enthusiast

zikronix

Posted
Posted (edited)
8 hours ago, Johnny01 said:

Johnn01: what year model and make do you own. And your saying everything is included with it.

Sent from my SM-G935V using Tapatalk
 

2017 Sierra. I wanted the black console with white thread. My upper trim plate is Grand lace wood. I found my upper trim plate locally.

 

Here is my post from it. These are the parts I ordered for my truck. If you want a black console with white stitching then this is it. Remeber the top trim plate is not included in my parts list. If you put the parts in your cart at gmpartsnow and register an account they will send you a coupon code for 10% off after a few days. Shipping was cheap to arizona.

 

Another Successful swap. Ordered a complete console all parts new from gmpartsnow.com with a 10% off coupon.  I got the top console piece here locally. Everything combined shipped ended up being less than if I would have gotten it off ebay. I have the Axiom finish with grand lace wood trim.

 

Parts list if you need it. 

 

84199890 - Complete console. Black with white stitiching w/ wireless charging.

23467516 - Sidetrim

22817347 - Sidetrim

22776807 - Front Bracket

11609982 - 2x Fender liner bolts

 

Specific to my truck

 

84024953 - Top Console with grand lace wood and axiom finish cup holders (Mine isnt adjustable, which will be changing once I figure out what part number I actually needed for that. EDIT: This option was removed in 2016)

19303285 - USB Cable

19119050 - USB Cable

 

For everything my total cost was roughly 600.00. 553.00 to Gmpartsnow shipped and 50.00 for the top piece.

 

 

Other console options Black with red thread 84131375

This one should be black with dark ash stiching (basically black with black thread) 84144697 

 

There are a ton of other consoles, that are for trucks with bose, etc. I didnt get into filtering out rpocodes for those. Ultimatly the best bet is to go to the dealer fine a truck with the console you want capture the vin and RPO codes  if you dont need the bose version you can save some bucks. and send it to corbin at gmpartsnow or flloyd at gmpartsdirect. 

 

Here is a link to my original post

 

Edited by zikronix
zikronix Enthusiast

zikronix

Posted
Posted (edited)
7 minutes ago, Scott Fish said:

well I ordered it today , we will see what I receive and what else I will need to order.

unless gm changed somewthing that parts list up there is all you will need for a console with wireless, black with white stitching. It comes with the lid even though it doesnt show it in the diagram. did you order 2 of the fender liner bolts. you need qty 2 there is only one in the bag. you can email who ever you ordered from and have them add it if you didnt. The usb cables should be correct since your getting a new console and you have the hmi but you can verify those on the first post of this thread. Also worth noting when you put in the driver side trim piece there is a plastic moulding on the support bracket below the dash. That has to come off.

Edited by zikronix

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • tjonesdfw
      2027 GMC Sierra: Official Discussion

      By tjonesdfw · Posted

      Whoever greenlighted the work truck matte black front bumpers on every trim but the AT4X should be fired!  I was hoping that was an AI mistake, but just realized they were on every model of the 2027 Silverado too.     Some parts of the interior do look premium, but the Denali Ultimate dashboard looks like an afterthought.  At least they appear to have lost the microfiber the high end Silverado models showed, but the '27 High Country dash looks better than the Denali.  
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      New member here. I am researching a read-first event-recorder concept for late-model GM V8 trucks. This is not a sales post. There is no product link, price, preorder, or mailing list. I am trying to determine whether the underlying problem is real before building anything.   Has your truck ever had a brief problem such as: - rough running or a momentary misfire - an oil-pressure warning or unusual pressure event - reduced power or a brief stall - a U-code or lost-communication problem - a symptom that disappeared before the dealer or independent shop could reproduce it   If so, I would appreciate the following details: - year, model, engine, and mileage - what happened and under what conditions - whether a DTC and useful freeze-frame data were stored - whether the shop was able to reproduce it - what the eventual confirmed repair was, if known - what additional information would have helped the diagnosis   The concept being evaluated is a removable leave-in recorder that continuously retains a rolling window from before and after an event. It would not tune, reflash, clear codes, or change the vehicle calibration.   I am also not claiming that it could predict lifter failure or see every internal ECM variable.   The real question is whether continuous event history would add enough useful evidence beyond freeze frame, GDS2, and existing scan tools — or whether it would simply be another unnecessary gadget.   For owners and technicians, which problem would make something like this genuinely useful: 1. intermittent misfire or AFM/DFM-related behavior 2. oil-pressure events 3. lost communication or electrical faults 4. none of the above Please be blunt. Negative feedback is just as useful as positive feedback.
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      No tears over the SLE and SLT trim levels disappearing but I kind of loathe the "Elevation" name. It's a truck--skip the elegance.   The slab-dashboard design is decidedly different. Almost has a Hummer flavor to it. "Professional Grade" seems to be leaning very white-collar, tech-driven these days moreso than blue-collar, functional design.   The Silverado would be my choice between the two new trucks. Pleased with the engine lineup in both. The GMC is a little "too much" for a truck, IMO, and the Denali borders on ridiculous - but I do know there are buyers for luxury trucks out there. It's just not my speed.
    • GMCustomerService
      Electrical problem

      By GMCustomerService · Posted

      Your safety is of utmost importance, @joshua1221, and we understand the importance of having all your lights working in your truck. If you have not already, we highly encourage you to bring your concerns to the attention of your local GM dealer. They are in the best position to diagnose your concerns as well as confirm the compatibility of the mirrors with your truck. Additionally, we would like the opportunity to explore any way we may be of assistance. When you have a moment, please visit: https://s.gm.com/support-request and fill out the support request form with all pertinent details. This form helps our team gather the right information and ensures your request is routed appropriately.
    • newdude
      2027 GMC Sierra: Official Discussion

      By newdude · Posted

      - I like the outside but not as much as the Chevrolet.  They ICE'd the EV styling and it works, but I think exterior goes to Chevy on this one.     - SLE and SLT dead = Not.  Surprising.  Fits into the rest of the GMC lineup like this which (aside from Pro) matches the rest of the family.  Elevation, AT4, Denali.     - Interior.  Sophisticated Malaise era.  Why do I say Malaise?  Drawn with a ruler.  Rectangles everywhere.  Looks very premium though.    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...