What have you done to your K2 today?

[Roidz]

They are. You seen them on Amazon? The reviews I read said they are really bright so I'm hoping they're as good as everyone has said.

 

 

Sent from my iPhone 6+

[morrislee]

They are. You seen them on Amazon? The reviews I read said they are really bright so I'm hoping they're as good as everyone has said.

 

 

Sent from my iPhone 6+

Why sir indeed I have. I have them in my truck! I also use them to flash the tailgaters at night, really works!

 

By no means they are luminating the entire rear, but they definitely does a good job allowing me to at least make out what is behind me in the camera. Stock did not do such.

 

They do sit a bit far off where the offset is suppose to be, but the mount of light just makes up for the lost light distribution.

 

Enjoy those suckers! Oh, dont touch them if you have them lit for a couple of seconds, they WILL get pretty hot!

[Roidz]

Why sir indeed I have. I have them in my truck! I also use them to flash the tailgaters at night, really works!

 

By no means they are luminating the entire rear, but they definitely does a good job allowing me to at least make out what is behind me in the camera. Stock did not do such.

 

They do sit a bit far off where the offset is suppose to be, but the mount of light just makes up for the lost light distribution.

 

Enjoy those suckers! Oh, dont touch them if you have them lit for a couple of seconds, they WILL get pretty hot!

Maybe this is a dumb question, but how do you flash tailgaters with ur backup lights? Must have them wired in to something else I'm guessing.

 

I really noticed tonight how bad the stock lights are. I was leaving the gym and I could see the reflection in the windows in the building behind that they just don't look very bright and like you mentioned as well, they should help with the backup camera and giving a little more light back there.

 

 

Sent from my iPhone 6+

[morrislee]

Maybe this is a dumb question, but how do you flash tailgaters with ur backup lights? Must have them wired in to something else I'm guessing.

 

I really noticed tonight how bad the stock lights are. I was leaving the gym and I could see the reflection in the windows in the building behind that they just don't look very bright and like you mentioned as well, they should help with the backup camera and giving a little more light back there.

 

 

Sent from my iPhone 6+

Under the dash, where the BCM connectors are, there is a constant 12v. There is also the input for the reverse light.

 

Goes like this:

 

12v -> Diode -> Button -> Reverse light input

 

The diode should not be required, i put it there just in case. The button is a non-toggle button, like a mouse click if you will, button is salvaged from LED strip demo packaging lol.

 

Tap the button really fast with the instant 800lm X 2 in the boonies without other lights, really confuses the driver behind, so they end up backing away!

 

Tailgaters be gone!!

[Roidz]

Under the dash, where the BCM connectors are, there is a constant 12v. There is also the input for the reverse light.

 

Goes like this:

 

12v -> Diode -> Button -> Reverse light input

 

The diode should not be required, i put it there just in case. The button is a non-toggle button, like a mouse click if you will, button is salvaged from LED strip demo packaging lol.

 

Tap the button really fast with the instant 800lm X 2 in the boonies without other lights, really confuses the driver behind, so they end up backing away!

 

Tailgaters be gone!!

That's awesome! But unfortunately most of that went over my head. (I'm awful with almost anything electrical)

 

You have a pic of the button?

 

 

Sent from my iPhone 6+

[morrislee]

That's awesome! But unfortunately most of that went over my head. (I'm awful with almost anything electrical)

 

You have a pic of the button?

 

 

Sent from my iPhone 6+

Finally found the picture lol

 

See if this works....

 

[Prdtrgttr]

Out with the old, in with the new. Silver 2015 Chevy SIlverado Crew Cab Standard box. 40/20/40 bench up front with heat. Just never know when the little lady needs to slide on over real close.

BDS 2.25" level up front. Ready Lift blocks brought the back end up 1.25". Bak Flip Fibre Max Tonneau cover. Matte Black Side Steps

[morrislee]

Out with the old, in with the new. Silver 2015 Chevy SIlverado Crew Cab Standard box. 40/20/40 bench up front with heat. Just never know when the little lady needs to slide on over real close.

BDS 2.25" level up front. Ready Lift blocks brought the back end up 1.25". Bak Flip Fibre Max Tonneau cover. Matte Black Side Steps

 

Never thought about the bench seat could be useful in "other ways" lol, I went with bucket seats for the look. but now I see a good use for it now that you mentioned it... XD

 

You need to change your avatar and signature!!

[thrasher2010]

Installed my 2.5" Rough Country Leveling Kit...( didn't out the rear block on that came with the kit).

 

Before

 

After

 

 

 

Sent from my iPhone using Tapatalk

[Strykers_Inc]

Installed rear Stoptech Drilled Rotors, Hawk Performance HPS pads, Color matched calipers, and spring (yeah I know its almost summer) cleaning underneath (wash/paint). Tomorrow finish the fronts.

[Habs]

.

Edited June 14, 2015 by Habs

[jclofton]

Hand washed Freestyle today.

 

 

Sent from my iPhone using Tapatalk

[belcherr]

2003 Vortech engine V6 I'll pressure just have a old changed and what could it be

 

 

Sent from my iPhone using

High oil pressure 2003 Blazer VTech motor making growling noise doesn't feel right behind the wheel riding rough

What's the problem

[Omar1]

Finally finished the 256 pages of this thread, Now I'm ready but where is the truck

[LongrangeLauber]

2003 Vortech engine V6 I'll pressure just have a old changed and what could it be

 

 

Sent from my iPhone using

High oil pressure 2003 Blazer VTech motor making growling noise doesn't feel right behind the wheel riding rough

What's the problem

Wrong thread. If you would like you can create a thread in the proper section