Jump to content

Recommended Posts

Posted

I disabled the DTRs on my '07 Silverado by pulling the fuse from the block under the hood. I've looked on my 2014 and can't find anything that relates to them or even mentions them in fuse block diagrams in the owners manual. Does anybody have a clue which fuse it is or even if there is one that controls only those lights? I'd appreciate any input.

  • Like 1
Posted (edited)

Why? They're for safety. Not sure if you've ever seen the result of a head on collision... I bet you would change your tune if you did.

Edited by VMaxtastic
  • Like 4
Posted

Why? They're for safety. Not sure if you've ever seen the result of a head on collision... I bet you would change your tune if you did.

Is safety the reason, or is it to sell and replace more headlights? Ever notice that motorcycles all run with their headlights on? When the Colorado Motorcycle Dealers Assn. lobbied for a law to mandate motorcycles to run headlights in the daytime I got involved. We found that the accident rate actually increased in some states that enacted such a law. The bill's sponsor actually told the House Committee that she had introduced a bad bill after hearing the facts. She asked them to kill it. They killed the bill. Manufacturers simply wire new bikes to run headlights any time the ignition is on to achieve their goal. Safety???

 

Is it safer to run headlights in the daytime, or run with one burned out at night because it burned out from being on all day when you didn't need it.

Posted

Is safety the reason, or is it to sell and replace more headlights? Ever notice that motorcycles all run with their headlights on? When the Colorado Motorcycle Dealers Assn. lobbied for a law to mandate motorcycles to run headlights in the daytime I got involved. We found that the accident rate actually increased in some states that enacted such a law. The bill's sponsor actually told the House Committee that she had introduced a bad bill after hearing the facts. She asked them to kill it. They killed the bill. Manufacturers simply wire new bikes to run headlights any time the ignition is on to achieve their goal. Safety???

 

Is it safer to run headlights in the daytime, or run with one burned out at night because it burned out from being on all day when you didn't need it.

I'll take paying for a bulb over getting smoked by someone that isn't paying attention any day. Lots of people are too clueless to turn on their headlights in low visibility conditions.. I personally think that all cars should have them.

  • Like 4
Posted

I'll take paying for a bulb over getting smoked by someone that isn't paying attention any day. Lots of people are too clueless to turn on their headlights in low visibility conditions.. I personally think that all cars should have them.

 

Okay but im with the OP does anyone know what fuse disables them or how to disable them?

Posted

Check the truck's manual. It will contain a fuse diagram & key, indicating what system is connected to what fuse.

Posted

Check the truck's manual. It will contain a fuse diagram & key, indicating what system is connected to what fuse.

It does not have one labeled DRL, my service advisor couldn't even figure this one out

Or just get a GMC with the LED DRL... then it will be cool to have them

i get better pricing on chevy

  • Like 1
Posted

There prob is not a fuse anymore, the BCM controls that function and with the advent of changes GM may have figured out how to get the BCM to control them fully now.

  • Like 1
Posted

Spoke with The Mechanic at my dealership the day I got the truck and he told me you can not Disable the DRL on the 14' even if you want it to... The DRL was program by GM before thru computer software and does not have fuses for you to pull it.. The techs is also not allowed to disable for you thru their computer. Basically, you have to turn it off manually thru the switch..

  • Like 1
Posted

what a pain, so if you do a HID retrofit wether projector or not the on the silverados your HID's are basically always on or you have to constantly turn the stupid nob

  • Like 1
Posted

Why? They're for safety. Not sure if you've ever seen the result of a head on collision... I bet you would change your tune if you did.

I don't live in Canada and don't believe my safety has anything to do with my initial question. Thanks for the info though.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 2011 GMC, 5.3, 183k miles. OK, ....I don't know, this may open a bucket of discussionworms. Ha. Here's the issue. I've been following GM's "mandate" to use Dexos 1 oil, 5w30 (Castrol). I'm thinking maybe I should consider a High Mileage oil due to 183k miles. Castrol and Mobil 1 both make HM but both do not display the Dexos 1 label. So....since I'm way past warranty does it hurt anything at all to change to the HM oil? Its not "Dexos 1" but I kinda doubt it will hurt a thing. I'd like some input especially if someone has done this. Thanks  
    • It is a company truck. Not under warranty. Both companies I’m involved with usually buy trucks that are discounted when looking. Except what the owners drive. Being retired and minority owner. I don’t drive a company truck. If they have the new GM gas engine it would be in a service truck. 
    • Update!   Had the dealer look at the issue. First tech says no problem?? I said there was no voltage on the brake terminal on the 7 pin connector! He said he did not know what pin I was talking about. So they bring out a seasoned tech and I explain to him. He attaches a VOM and has me push the brake, and sees no voltage!!    Tom, the seasoned guy says lets go back to my service bay and look closer. We discover thru his on line system that the controller is a "smart controller" as it needs to detect a trailer connected before the brake voltage is allowed to the 7 pin connector!!! He also showed me a GM bulletin stating some trailers with LED lights have such low resistance the controller wont recognize them!!! I was thinking WTF, but thanked him for bringing me back into the service bay and explaining this all to me. He also plugged in a trailer simulator and it showed the brake controller was indeed working.   After my dealership visit I hooked up to an older camper with standard 1157 lights and the truck did connect and the electric brakes worked great!    Not to sure what I have to do with the equipment trailer with LED lights, I cant tow it with no brakes.   Why did something so simple for many years have to get so complicated!        
    • Do find out as that would be interesting if they have been using any L8T engines or for that matter have been running any of the Ford gas 7.3 to see how they have been panning out.    I assume your nephews engine replacement was on his dime as the regular warranty would have long past unless he had some form of extended warranty that covered such events. That shows though and may depend on the year of the build that failures are occurring with the valve train well beyond the warranty distance and more than likely so will others have that sneak up on them.  
    • I realize this is an old post and its probably been talked about since then on this forum and I may have mentioned it myself but the Chev multi flex tailgate on the HD trucks are all aluminum so there is that one item that I am aware of on a current GM HD truck that is aluminum but if its the standard tailgate then its still a steel unit as far as I am aware to current 2026 model year.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...