Jump to content

Recommended Posts

Posted

Why not use bedliner for undercoating? :confused:

Posted

Some guys get the rear wheel wells sprayed for noise...it was an option when I got mine sprayed. My concern is that its not completely water proof...and water could get between the liner and metal. And it definitely won't stick to the waxy stuff the frame is coated with...

Why not use bedliner for undercoating? :confused:

Posted

That's the main reason I use motor oil - nothing will stay put under there for very long. I find coatings just crack, and let sand, salt and water get held against a section of the frame. After that crap ages it's almost better to just have a bare frame and continually oil it down. These days we know that'll never happen on a cold day in hell ...

  • Like 1
Posted (edited)

after 3 days the paint has dried, the glossy look has faded some, so Im grateful they did something........I feel remorseful for my dealer because GM threw it at them,they are nice people with not much corporate support from GM,from what I can tell. They did their best and even outsourced it trying to get the best job done, so at least my truck wasn't forgotten about. Guess the whole thing has just blindsided me since it was going on for so long.........life goes on.

Edited by rdbaja
Posted

Well I'm not trying to defend, start, or even get involved but the GM dealership didn't do the crap job the Dodge dealership did right. Some dealerships don't have body shops anymore they outsource to independent shops.

Posted

How? Just pour it in a pump can and spray it on?

 

so long

j-ten-ner

My grandfather told me about this years ago. They used to do it with brushes and a big bucket of collected used oil. (in the snow, uphill, both ways). They also used to take motorcycle chains, heat them in an oven on hi for about a half an hour, then drop them into a bucket of used motor oil and let them cool. He said that was all the service your chain needed for at least a year. I guess used oil is not necessarily a waste product.

Posted

Maybe I've got the wrong picture in my head. But doesn't it drip all over the place?

 

Even if it doesn't wouldn't it leave a trail when you're driving in the rain?

Not judging, just wondering if this is not a little sketchy environmental wise?

 

Since I'm driving a truck with a V8 I'm certainly not a tree hugger. Don't get me wrong. But I'm trying to keep it somewhat reasonable.

 

so long

j-ten-ner

Posted

Any undercoat will drip, but you only use a couple quarts of NEW oil for the entire underside...big trucks leak more than that in a day, everyday. Used oil has its own issues, the reason I don't use it.

 

The initial time is worst, once you get the dust built up, it takes less oil and almost no drips. I sprayed my truck a few weeks ago, it left almost no drips in my driveway.

 

Sent from my SAMSUNG-SM-G730A using Tapatalk

Posted

Sure, it drips after I first spray it. It'll make a mess of the driveway for a couple days until nature cleans it up.

 

Like Sdeeter said - one heavy truck will leak more than that in a day. Let alone the thousands of hydraulic lines that burst in trash trucks and off-road equipment every single working day, spilling a MINIMUM of 5 gallons at a whack. We all still have water to drink, and food to eat.

 

Just like air pollution. As an asthmatic, I'll be the first to go if the air is truly polluted, so sleep well.

 

A little oil won't kill you, no matter what the media tries to brainwash you into thinking. Back in my grandfather's day they used to dump THOUSANDS of gallons of GASOLINE, leftover from the refining process, into the ground, or the local river .... because it was too dangerous and flammable to be of any use! Not to mention the thousands of gallons of motor oil that went the same way. And what did that do to the earth's population? Hmmm ....

 

90% of the driving public gets their oil changed at quick-lube joints these days, & the other 9.9999% would never dump their oil like that. Today everything is cleaner than it's ever been .... yet people all around me still die of cancer.

 

I still have asthma, even after all the money wasting, engine choking, & unreliable pollution-control systems installed on every car for the past 40 years ....

  • 7 years later...
Posted

I have a 2013 silverado 1500 that the frame is completely rusted and dealers won't eveb talk trade even though they sold it to me new!

IMG_66541.jpg

received_493750659037678.jpeg

received_529233568408536.jpeg

received_916247409036190.jpeg

received_730523291654763.jpeg

IMG_66501.jpg

IMG_66531.jpg

  • Haha 1
Posted
5 hours ago, Keith Jenkins said:

I have a 2013 silverado 1500 that the frame is completely rusted and dealers won't eveb talk trade even though they sold it to me new!

IMG_66541.jpg

received_493750659037678.jpeg

received_529233568408536.jpeg

received_916247409036190.jpeg

received_730523291654763.jpeg

IMG_66501.jpg

IMG_66531.jpg

You should have taken care of it more often.  All that is fixable though, you can get replacement parts and weld them in.

Posted

That frame is junk. Get a used frame or buy a new one if you want to keep the truck.

  • Like 1
  • 3 years later...
Posted

I also have a 2013 Silverado where the frame is completely screwed I just paid 10 grand for it and when I took the spare tire out it was a mess I'm very upset about this situation and come to find out there's a TSB out on it

  • Haha 1
Posted (edited)

And what?  It's a used, 12 year old truck.  If it was treated well, the frame would still be fine, but it wasn't, and most likely the seller knew it and was dumping it to you, an unsuspecting buyer.

Edited by davester

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,552 Guests (See full list)


  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...