Jump to content

Recommended Posts

Posted

 

305 with a 0 offset will poke out a bit, it all depends on the look you're going for :)

 

Yep! I want it to be flush/poke out a tad but not sure if I want it that wide. Heavily considering going with a 20" Method Mesh or Method NV in +18.

 

You have the 1.5" spacers which would effectively be the same amount of poke that a 305 would with 0 offset. What are your thoughts on how far yours stick out?

Posted (edited)

 

Yep! I want it to be flush/poke out a tad but not sure if I want it that wide. Heavily considering going with a 20" Method Mesh or Method NV in +18.

 

You have the 1.5" spacers which would effectively be the same amount of poke that a 305 would with 0 offset. What are your thoughts on how far yours stick out?

 

The 1.5" spacers put my wheel at -12. The poke is just about perfect, don't really notice any rocks either. Just some dirt on the sides.

 

I personally think 0 offset is the best though. You can fit a wider tire without rub and you still get some poke. (With just a level).

Edited by Rawyzf
Posted

Got my rims in the other day. Waiting on my lug nuts (was delayed a few days..... Good ole usps)

Went through this whole thread and didn't see anyone with these rims!

 

Should have the lugs tomorrow! Gonna get 33x12.5x20 nitto g2s. Rims is a 20x9 with a +18mm offset.

 

080a507007e531aaa7a13e1ce777ba84.jpgec4dedea18f0c8baa109160a24a3ec04.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 4
Posted

Whats up with the air dam? How did you make the lower finishing piece? Is it just a cut down stock piece? I never noticed that on your truck before...

It's just the stocker. I trimmed it using a cutting wheel and cleaned it up with a sanding disk.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted (edited)

BFG KO2 275/65R20, RC 2" level (no rubbing)

 

7ADD3274-7376-4C72-A45C-CC100C94F3BE_zps

 

Very little road noise, MPG doesn't seem to have been affected very much and ride quality is only slightly firmer than stock @ 42psi. Paid $1340 CDN installed. Overall very happy so far, I was debating a lot between the 60 and 65 but I'm glad I went this route. Looking forward to trying them in the snow.

 

Here's a before and after also:

 

DD362A86-62FE-4CF1-A720-84C146F5EB69_zps

Edited by Das Chevrolado
  • Like 2
Posted

20150911_182243.jpg

These wouldn't happen to be pro comp wheels would they.... And do you have more pictures or specs?

 

Sent from my SM-G900W8 using Tapatalk

Posted

Help me out guys im up in the air on wheels what do you think of these sets and is anyone rocking them...

1.

http://www.procompusa.com/wheels-product-details.aspx?pt=101508&lc=PXA&pqq=2336-1558-1551-1557&pqa=13677-8275-8060-8268

 

2.

http://www.procompusa.com/wheels-product-details.aspx?pt=101508&lc=LRG&pqq=2336-1558-1551&pqa=13660-8275-8060

 

3.

http://www.procompusa.com/wheels-product-details.aspx?pt=101508&lc=LRG&pqq=2336-1558-1551-1557&pqa=13661-8275-8060-8268

 

Also. Considering the pro,Comp 31 series in flat black all 18x9 0 offset anyone have these wheels and what's your thoughts on how they might look... Here's the truck im trying to decide what to buy for... 9b4e6d2e7c4f5a16a4636a421f1c3f66.jpg

 

Sent from my SM-G900W8 using Tapatalk

Posted

These wouldn't happen to be pro comp wheels would they.... And do you have more pictures or specs?

 

Sent from my SM-G900W8 using Tapatalk

Method NV.

 

Sent from Tapatalk App - Samsung S6

  • Like 1
Posted

Method NV.

 

Sent from Tapatalk App - Samsung S6

Look very similar to the pro comp ones I'm debating about... Can't decide

 

Sent from my SM-G900W8 using Tapatalk

Posted

I considered that first wheel you have linked, but decided on the Methods as I know they are a good wheel with lots of good reviews. Not saying Pro Comp isn't a good wheel at all either, they might be just as good. I liked the center portion of the Methods better, looked more finished.

Posted

These wouldn't happen to be pro comp wheels would they.... And do you have more pictures or specs?

 

Sent from my SM-G900W8 using Tapatalk

17" Method NV's with a 0 offset wrapped in 285/70/17 Goodyear Duratracs.

 

20150914_225622.jpg

  • Like 2
Posted

I considered that first wheel you have linked, but decided on the Methods as I know they are a good wheel with lots of good reviews. Not saying Pro Comp isn't a good wheel at all either, they might be just as good. I liked the center portion of the Methods better, looked more finished.

So wait, did you just place an order for some 17" NV's?

 

Lol, the guys at the tire store must love seeing you pull up!

  • Like 1
Posted

So wait, did you just place an order for some 17" NV's?

 

Lol, the guys at the tire store must love seeing you pull up!

You Sir are correct x2.

 

 

Sent from Tapatalk App - Samsung S6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...