Jump to content

Recommended Posts

Posted

Im a little upset the size i need 275/60r20 isnt offered with a white letter option. Half the reason I love BFG's are the white letters. I dont wanna go down a size to the 275/55r20 (they do come with white letters), bc a beefier tire ultimately solidifies the look of any truck. BFG! Get it together and offer white letters on ALL your tires!

Posted

Im a little upset the size i need 275/60r20 isnt offered with a white letter option. Half the reason I love BFG's are the white letters. I dont wanna go down a size to the 275/55r20 (they do come with white letters), bc a beefier tire ultimately solidifies the look of any truck. BFG! Get it together and offer white letters on ALL your tires!

285/55?
Posted

I think either way can look nice, but to me the white letters are dated and out of style; unless you're building a trophy truck or a classic one.

I mean I see white letters and I just think "wow, look at that old man truck" but of course I mostly see white letters on tires OTHER than BFG. Especially when the white letters are on street tires on a truck...gross.

  • Like 1
Posted

I think either way can look nice, but to me the white letters are dated and out of style; unless you're building a trophy truck or a classic one.

I mean I see white letters and I just think "wow, look at that old man truck" but of course I mostly see white letters on tires OTHER than BFG. Especially when the white letters are on street tires on a truck...gross.

I agree with you on this, most white letters just look bad, but then again most are not solid block lettering and outlined. BUT for some reason BFG just looks "right" with the white lettering. Maybe its because ive run my BFGs like this for over 10 years so Im used to it. I dunno. But I did the BFG white out.

Posted

I was sold on getting these babies black out, until seeing JerryCanada's picture. Now I have some thinking to do hahaha, they look good and have thrown off all my thinking.

I have run BFG All Terrains for almost 10 years and it's always been black out. With the white out is it still easy to shine the tires? I usually shine it with a sponge after a wash and drying time.

  • Like 1
Posted (edited)

I was sold on getting these babies black out, until seeing JerryCanada's picture. Now I have some thinking to do hahaha, they look good and have thrown off all my thinking.

I have run BFG All Terrains for almost 10 years and it's always been black out. With the white out is it still easy to shine the tires? I usually shine it with a sponge after a wash and drying time.

Will try to remember to take a picture of the truck cleaned once I get back home next week. Give you a better idea on how they look.

 

Edit: To answer your question. when they do get dirty I just use a cheap brush they sell at the dollar store to clean the house dip it in the bucket and brush it clean. Then tire dressing.

Edited by JerryCanada
Posted

blackwall out.... clean!

x2. I spend a lot of time on gravel and my previous white letter tires ended up with red clay stained letters. Black wall all the way!

Posted

Im a little upset the size i need 275/60r20 isnt offered with a white letter option. Half the reason I love BFG's are the white letters. I dont wanna go down a size to the 275/55r20 (they do come with white letters), bc a beefier tire ultimately solidifies the look of any truck. BFG! Get it together and offer white letters on ALL your tires!

you can get tire markers and colour in the letters.

it wears off but you just have to re-apply. ive never used the stuff, but ive seen it used a lot on motorcycles.

http://www.summitracing.com/int/search/part-type/tire-letter-markers-sticks

Posted

I was thinking about getting these tires but with a smaller rim size (like 16 inch) to give that "off road rugged" look. Currently have a 2 inch lift on my '10 extended cab.

Posted

I like those tires. That is what should have come on this truck. Too bad it will be long time before I need new ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
    • I had an alternator fail that was shorted internally in such a direct fashion in addition to the larger gauge cables that it appeared like a VERY dead battery. Granted I think the car did power up, it definitely wouldn't start.   Rodent damage to wiring?
    • ... I don't think he could.
    • Using experience to justify bad advice is lazy and typical of someone incapable of articulating why their advice is prudent.    This immediately sets off the BS alert and the advice that followed certainly qualified.   Asking an idiot for help getting out of dumb situations because he is an expert... at getting himself into dumb situations.   Unless I've been living in an alternate universe - the first thing everyone does when getting into a sticky situation is shift to a higher gear 🤨.   Of course not, the torque multiplication, mechanical advantage and finer control typically afforded by the lower gear is far better suited for this scenario.   There ARE scenarios where a higher gear MIGHT be appropriate determined more by the drivers ability to control EXCESSIVE wheel spin versus applying torque to the ground.
    • I'm not sure I agree with "extreme" low speed, high torque sentiment here with regards to the prescribed use of low range. How about...whenever it's needed?   A 2.72:1 transfer case and whatever differential gears these Silverados have (3.42's, maybe?) aren't producing "extremely" low crawl speeds. Or insanely high torque multiplication. Even with the 1st gear in these newer transmissions. But it does provide mechanical advantage and potentially better control at slower speeds. And with extra weight or towing, I think it adds mechanical sympathy for the truck as well.   Plus, traction control and the other assists generally turn off when you shift into low range. Those aren't needed here, they'll work against you if you need wheel spin. In high range you'll need to figure out how to turn off the various modes those assists provide. Depending on the vehicle, those things don't all automatically turn off or turn completely off.   While I agree that a farmer might have some great practical experience, a recommendation to "always" using one gear isn't very informed advice. If the farmer had said WHY and could explain the physics behind his prescriptive "always" I'd definitely listen. The way he's described here makes it sounds like he could either be uninformed or is telling everyone what worked for him, not necessarily that there could be a more advantageous way about things.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...