Jump to content

Recommended Posts

Posted

Looking to add some LED bulbs to my Lo beams and fogs on my Silverado with projectors. Anyone have a good setup with part numbers or link?

 

Dont really want to hassle with HID's and the DRL's.

Posted

Looks great, what brand/ Part numbers??? I bought the 7200LM 40/80Watt Starnils and they DO NOT look like that!

Sorry it took me so long to respond. I'll post them tomorrow. I have the box at work and don't remember the brand. They are BRIGHT!!

This is how they should look from factory.

 

 

Sent from my iPhone using Tapatalk

Looking to add some LED bulbs to my Lo beams and fogs on my Silverado with projectors. Anyone have a good setup with part numbers or link?

 

Dont really want to hassle with HID's and the DRL's.

My brother has an all LED setup on his Silverado. He has the same bulbs as me. I'll post the picture of the box and model numbers tomorrow. Looks as bright as mine.

 

 

Sent from my iPhone using Tapatalk

  • 2 weeks later...
Posted

these are the same bulbs that came with my Kit.

I had a different set before that were LOUD!! the fans made the truck vibrate lol

http://www.ebay.com/itm/2015-30W-3200LM-H7-COB-chip-LED-Headlight-Bulbs-6k-led-hid-cree-smd-plasma-/111796735960?hash=item1a079acfd8:g:t2AAAOSwo0JWFt5j&vxp=mtr

 

Those are some bright LED lights. I am on the fence between the HIDs and LEDs. I like LED lighting but I am very familiar with the HIDs.

 

I have run DDM 55W HIDs for ever on all my trucks and I haven't decided what Im going to run in my 2015. I don't think that I will be switching out the projectors as I don't keep my truck long enough to switch that out.

 

I would like to add some new Headlights. Is the Morimoto Kit really worth the expense over the DDM Kits?

 

If I go the Morimoto route what all do I need to install on my truck?

Posted

 

Those are some bright LED lights. I am on the fence between the HIDs and LEDs. I like LED lighting but I am very familiar with the HIDs.

 

I have run DDM 55W HIDs for ever on all my trucks and I haven't decided what Im going to run in my 2015. I don't think that I will be switching out the projectors as I don't keep my truck long enough to switch that out.

 

I would like to add some new Headlights. Is the Morimoto Kit really worth the expense over the DDM Kits?

 

If I go the Morimoto route what all do I need to install on my truck?

I love my headlights now

I think the LED kit is worth it

To install is super easy. Everything fits inside the stock headlight housing in the GMC. Remove original bulb, replace with new one, connect ballast and that's it!

 

 

Sent from my iPhone using Tapatalk

Posted

these are the same bulbs that came with my Kit.

I had a different set before that were LOUD!! the fans made the truck vibrate lol

http://www.ebay.com/itm/2015-30W-3200LM-H7-COB-chip-LED-Headlight-Bulbs-6k-led-hid-cree-smd-plasma-/111796735960?hash=item1a079acfd8:g:t2AAAOSwo0JWFt5j&vxp=mtr

So...these are what you use now or no? Plug N Play?

 

 

Sent from my iPhone

Posted

So...these are what you use now or no? Plug N Play?

 

 

Sent from my iPhone

Yes. They're plug and play.

Brighter than stock. Get the fog light kit as well. That's what makes the difference.

 

 

Sent from my iPhone using Tapatalk

Posted

Thank you for the response!! So if I wanted to do the FXR conversion what else would I need to have to complete the install if I ordered this kit? http://www.fastheadlights.com/ProductDetails.asp?ProductCode=fxr_chevy_retrofit-kit

I want this kit for my Sierra so bad!!! I don't trust myself to do the work, but would you recommend it ok for any local truck shop? I really hate these headlights, and would rather not spend a small amount on fixes that I have a feeling I won't like. Id rather use some Xmas money to get the FXR kit. Just want to make sure it's installed right and is reliable.

  • 2 weeks later...
Posted

I want this kit for my Sierra so bad!!! I don't trust myself to do the work, but would you recommend it ok for any local truck shop? I really hate these headlights, and would rather not spend a small amount on fixes that I have a feeling I won't like. Id rather use some Xmas money to get the FXR kit. Just want to make sure it's installed right and is reliable.

If you want to vet a truck shop I suggest to see how they do other hids. If they've ever retrofitted or whatnot. I tried finding one in vegas to just pop open my headlights and install a projector but they wanted 400 bucks for that. They also are the type that install cheap ebay hids into reflectors.

Posted

I bought some new LED kits for my truck. Both headlight and fog lamps are the same bulb. Very bright and quiet. (Previous setup was HID lights w/ led headlights)this is an all led setup. 66ef6913c2e935efe840b102ad82533f.jpgb357b8c7a0daf7210039385270bd80cb.jpgdf58def62626b6d7490710feb67e6298.jpgc1ae23a86e099dd220fb50c971f0e735.jpg

 

 

Sent from my iPhone using Tapatalk

 

So you're using the same LED bulb for both headlights and fogs? The one you linked here http://www.ebay.com/itm/2015-30W-3200LM-H7-COB-chip-LED-Headlight-Bulbs-6k-led-hid-cree-smd-plasma-/111796735960?hash=item1a079acfd8:g:t2AAAOSwo0JWFt5j&vxp=mtr

 

They look really good and might be my answer. I don't want to modify anything really so installing HIDs is out of the question for me. These LEDs look like the winner.

 

Thanks!

Posted (edited)

So you say led kit? I'm super new to this and hate the factory lights. Can I just buy the linked bulbs and plug them in? Or do I actually need more parts? Or where did you buy said kit? Thanks in advance

Edited by Mtinks85
Posted

 

So you're using the same LED bulb for both headlights and fogs? The one you linked here http://www.ebay.com/itm/2015-30W-3200LM-H7-COB-chip-LED-Headlight-Bulbs-6k-led-hid-cree-smd-plasma-/111796735960?hash=item1a079acfd8:g:t2AAAOSwo0JWFt5j&vxp=mtr

 

They look really good and might be my answer. I don't want to modify anything really so installing HIDs is out of the question for me. These LEDs look like the winner.

 

Thanks!

Yes. Same bulb but make sure you get the correct size. I think fog lights are H5. I'm not sure. I'll check the box and post back tomorrow. The headlights suck, but the fogs are insane lol. No one has flashed me yet though. #WINNING

 

 

Sent from my iPhone using Tapatalk

So you say led kit? I'm super new to this and hate the factory lights. Can I just buy the linked bulbs and plug them in? Or do I actually need more parts? Or where did you buy said kit? Thanks in advance

The kit comes with all that's needed. Install is easy. Takes about 30 minutes ( due to passenger side air box removal)

Huge upgrade over stock.

 

 

Sent from my iPhone using Tapatalk

Posted

Thanks man I appreciate the feedback. Now you said to the other guy the headlights suck....which led kit do you suggest...need something better than these shitty stocks! Thanks again

Posted

Yes. Same bulb but make sure you get the correct size. I think fog lights are H5. I'm not sure. I'll check the box and post back tomorrow. The headlights suck, but the fogs are insane lol. No one has flashed me yet though. #WINNING

 

 

Sent from my iPhone using Tapatalk

The kit comes with all that's needed. Install is easy. Takes about 30 minutes ( due to passenger side air box removal)

Huge upgrade over stock.

 

 

Sent from my iPhone using Tapatalk

 

Does the GMC fogs not use the 5202 for the Fog lights?

 

Did you add the FXR retro fit?

Posted (edited)

 

Does the GMC fogs not use the 5202 for the Fog lights?

 

Did you add the FXR retro fit?

no retro fit kit, just added the bulb and ballast.

simple as that

 

edit: fog bulb says H16 on my box. my brother has a silverado and he says its the same as his. :)

I believe its the 5202 Bulb

Edited by BootyHunter86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 
    • The average lifespan of automobiles on the road is increasing - here's why
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...