Jump to content

1996 GMC Yukon SLT - FM periodically goes out while AM may still work

smalltalker

Recommended Posts

smalltalker New Member

smalltalker

Posted
Posted

I have a 1996 GMC Yukon SLT - 2 DR with factory radio.

In the past I have replaced all speakers.

I noticed that I was having issues with speakers going in and out. And some lights going out on the front of the radio coincided with the outages (maybe a way to decipher which speaker is the problem?)

 

Anyway, the radio may or may not come on at all. But works about half the time (as I hit bumps). If I am listening to FM, the display (station readout) is on. It may go out and I lose all sound (maybe some static still if you listen carefully). But if I then press the buttons to switch to AM, I may get back all sound (but not as loud as it is when the display is on). At first I was thinking it was a power issue but with AM still working, I am no longer sure (maybe it is the amount of power that is getting there and AM requires less power?. I do know that there are loose speaker connections (at least one in driver side door). Sometimes, it goes completely dead where even AM won't come on. I can go days without any problems or cycle many times within a few minutes.

 

Anyway, has anyone experienced this? If my stereo is shot, I don't mind getting another one. It's just that I don't want to get another one and experience the same problem.

 

EDIT: I also wanted to add that at times when the power problem is occurring, you can hear the cd player make noise like its trying to start up and just doesn't have enough power.

 

 

Thanks for any help you can provide.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Bent valve in 2025 GMC Canyon Denali - Requires engine swap at 14K miles

      By newdude · Posted

      No ETA is available for that engine at the moment in the GM system.   I would start at the dealer.  Try and talk to the parts manager or service manager and see if they can start a CX Connect case and get an ETA from GM on when engines may be available.  If they just check Parts Workbench and say "no eta", they aren't trying hard enough.  They need to do a CX Connect and chat with DPAC to find the ETA.      
    • Chuck FB
      MPG at 600 miles

      By Chuck FB · Posted

      I would have to read back to get a better picture in my mind of some of the other comments and what they were using for a driving scenario they based the fuel mileage off of. That is why the fuel mileage conversation is extremely difficult to make fair comparisons from. If I was to be living in town and only driving around town, light to light and some longer stretches that doesn't have a light every block, and the usual stop at a grocery store and the bank and so on and so forth, my fuel mileage even during the summer time would be so bad with my truck I don't even want to know how bad it would be !. Then add in winter time and idling to warm it up to clear the windows and driving through snowy streets etc, large heavy trucks with gas engines have NEVER been worth crap for fuel mileage and why some little pot licker of a car with wheelbarrow tires and a 1300 cc four cylinder non turbo engine was the ticket to using a mere fraction of the fuel over a full size pickup.    By the way my truck has the 34" tires as its a HC but not the BFG KO3 tires ( that was an option for my truck but the sales guy couldn't figure out what the tires actually were so that never got on the order until it was too late to change the truck order ). So what fuel mileage your getting actually sounds good for "town driving" and with my truck when I go to town the fuel mileage keeps increasing as I get closer to town because it takes quite a while to get the driveline oils warmed up ( and why it always shows better fuel mileage on the return trip from town because its already warmed up ) but once I am in town that fuel mileage average just keeps dropping the more I mess around town and then has to recover back to something reasonable again by the time I get home for an over all average.    I'd be curious what your sticker says for the factory weight of your truck, mine is close around that 7700 lb due to the options it has. But anyway the long and short is, vehicle weight, higher rolling resistance heavy tires and a hefty driveline and a relatively large gas engine make for crap fuel mileage in stop and go scenarios, all one can do is drive it easy off the line at each stop and as my dad had said over the years, drive like a raw egg is under your foot and that's the best one can do. Years back with a carbed engine and if the carb was getting a bit out of tune etc as would the ignition system, the fuel mileage on pickups with larger engines was just awful compared to what your getting. We pay the fuel price penalty for driving HD trucks over some little vehicle, that is the reality. 
    • diyer2
      Navigating senior years.

      By diyer2 · Posted

      Speedy recovery.
    • KARNUT
      Slate Electric Truck

      By KARNUT · Posted

      We had two Toyota’s with that engine in the mid 80s. We had 50 gallon fuel tanks, a toolbox full of tools, an air compressor and assorted parts for our equipment. We beat those up and down pipeline ROWs until we started buying diesel trucks. Then they became parts runners and first vehicles for our teenagers first cars. Our shop Forman wrecked them both two years apart when we hired him out of high school as an apprentice. Good thing he’s an excellent mechanic. It took awhile before he could be called a good driver.
    • diyer2
      Gas Prices

      By diyer2 · Posted

      $4.26 85 oct 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...