Jump to content

Little annoying things about your truck


Recommended Posts

Posted

 

2016 LT, 5.3, mine has a very rough idle too,, pull up to a stop sign and it shakes, Dealer says that is normal, not buying it. I only have about 2500 miles so far, Also,, fuel gauge seems to be off, as far as I know, I have a 26 gallon tank,, low fuel light came on this morning, only took 18.5 gallons.

 

Both my 15 and 16 5.3 idled OK, but the '16 seems to be lower. Hasnt tried to stall or shake.

 

Gas light thing is normal, 18-19 gallons when it comes on is all mine ever took. Can run it pretty much to E on the gauge and it only takes like 22 gallons. Dont have the guts to run it out completely and see how much it takes :)

  • Replies 182
  • Created
  • Last Reply
Posted

I run mine until the fuel amount left goes from 40 miles left, to just saying LOW. Then i still can only squeeze 22 Gallons in it. Most I have ever gotten in my truck was 23.5 gallons when I was below E on the dial.

Posted

Anyone else hate how the fan slowly turns down when you switch it off?

I run mine until the fuel amount left goes from 40 miles left, to just saying LOW. Then i still can only squeeze 22 Gallons in it. Most I have ever gotten in my truck was 23.5 gallons when I was below E on the dial.

I managed to put in 26.5 at the pump. I run my truck till there is no gas left.

Posted

Anyone else hate how the fan slowly turns down when you switch it off?

 

The A/C - Heater blower fan? I never turn mine off so I never noticed anything annoying.

Posted

My fuel gauge is accurate... empty and light on is very little left.. That said the Tundra is terrible for that.. E with the light on and it still has 6 or 7 gallons lefts... on a 26 gallon tank.

 

Sent from my SM-G900W8 using Tapatalk

Posted

 

 

The A/C - Heater blower fan? I never turn mine off so I never noticed anything annoying.[/quote

Yes, when I turn it it off the fan slowly dies down. I wish it would switch off instantly. I prefer windows down over the fan.

Posted

Bothers me that every time I turn the radio volume up or down the screen changes to show me that. I don't need to see it

Jim

 

Very good point. Yes, very annoying...And it stays on the screen for quite some time.

Posted

 

2016 LT, 5.3, mine has a very rough idle too,, pull up to a stop sign and it shakes, Dealer says that is normal, not buying it. I only have about 2500 miles so far, Also,, fuel gauge seems to be off, as far as I know, I have a 26 gallon tank,, low fuel light came on this morning, only took 18.5 gallons.

I had a rental '15, 5.3 that shook at idle. It idled at 450 to 500. The '15 I purchased idles around 600 and is smooth at idle.

Posted

Wiper arm bolt cap at the base is missing, I'm the only one that hand washes my truck in my driveway and i see no other reason for it to be missing other than a high power car wash. Grrrrr.

Posted

I had a rental '15, 5.3 that shook at idle. It idled at 450 to 500. The '15 I purchased idles around 600 and is smooth at idle.

 

I think that is what the prob with mine is,, idles less that 500 rpms, will see if they can move it up when I take it in for first service.

Posted

My most recent one is the engine seemingly coming apart after only 21,000 miles. Yep, on vacation 7 hours away, it's in the shop with one of the headers removed so they can figure out what's wrong. Got the flashing check engine light the morning after towing my camper to the beach. I'm sick over it and my confidence in it is shot. Oh yeah, the AC stopped working 2 hours into the trip also. Other than that, I've loved it lol.

Posted

post-158548-0-40113100-1464098576_thumb.jpg

I have to park it in the barn, it's to tall to fit in my 7' garage door, lol my buddies say 1st world problems

post-158548-0-40113100-1464098576_thumb.jpg

post-158548-0-40113100-1464098576_thumb.jpg

post-158548-0-40113100-1464098576_thumb.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,866
    Total Members
    8,960
    Most Online
    Greg3160
    Newest Member
    Greg3160
    Joined
  • Who's Online   3 Members, 0 Anonymous, 420 Guests (See full list)

  • Latest Articles

  • Posts

    • Late reply, but yes—it works on the SLT trim. Compatibility comes down to the plastic shroud shape behind your mirror, not the trim badge itself. On the SLT with auto-dimming, it uses a plug-and-play Y-harness off the mirror/rain sensor power, so no need to run wires down to the OBD port. If anyone's ever unsure about fitment, just drop a photo of your mirror housing and we can double-check it.   Appreciate the detailed feedback on the install! On the windshield glare—we actually took feedback like yours and developed a dedicated CPL (polarizer) filter to cut down dash reflections on sunny days. If you're still running the cam, shoot me a DM. I'd be happy to send a CPL filter over for you to test out—no charge. 
    • There are no stickers in your glovebox?
    • Look at the numbers on the stickers in the door jam...
    • Yes, every time the developer updates his code, you must recompile. I will private message you with the latest because it changes pretty much with every version.
    • After I wrote that reply I went for a ride. 85 F out. So trans started at 85 F and it shifted the same as it did an hour latter at 168 F. I've never actually recorded the to cold to shift point but it is under 32 F before they start hanging on to a lower gear or leaving the converter unlocked. Both intended to heat fluid.    Yes, brake or bake. Absolutely.      Your welcome. True research ended decades ago. Field trials are still in play.    There is a thing called oxidation onset temperature. This is the heat related oxidation not the O2 exposure kind. For mineral oil that starts at 140 F. So what happens after 140 F? Each 20 F cuts fluid life in half! Does using a Full Synthetic improve that? Yes! By how much? Depends on the base oil type and a few other factors. But enough to notice. Some esters are even higher. There are even synergies between types the will raise it higher than any one component is alone.    Then there is "Hindered" oils. Antioxidant additives. Hindered Polyol Esters can sit at 500 F for years in a turbine.   When a blender brags his oil will 'take 500 F" in service he doesn't specify for how long. Water will dance on a 500 F hot plate for several seconds. @newdude put up a chart showing the relationship between fluid temperature and it's life in an automatic transmission. Here's a version of that chart for Group III based oils. These temperatures are those in the pan as observed as 'normal'. that is you drive as you do for as long as you do under what load you ask of it and whatever that temperature is this graph applies to. Flash temperatures of a few minutes isn't what his means.    Note that fluids held at a constant 240 F have a service life of only 20K miles. 220 F explains the factory exchange limit, eh? My equipment I keep under 180 F and I'm good if the cooler will hold it as low as 140 F. But that's me.   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...