Jump to content

Recommended Posts

Posted

bdbake01 that is a friggin awesome post. To take the time to type all that up and even include a PIC. This will be very useful to anyone looking at replacing an AC Condenser. The selflessness of our fellow GM Trucks forum members knows no boundaries. Makes a person proud to be a member here. Kudos to bdbake01

  • Like 1
Posted (edited)

bdbake01 that is a friggin awesome post. To take the time to type all that up and even include a PIC. This will be very useful to anyone looking at replacing an AC Condenser. The selflessness of our fellow GM Trucks forum members knows no boundaries. Makes a person proud to be a member here. Kudos to bdbake01

 

Well thanks! Just trying to help out, give back a little. Forum has certainly helped me!

 

FYI, I considered a full writeup with pics for the removal and install, but this dude did a pretty decent job so why reinvent the wheel. Will include here for those looking:

 

 

 

He really didn't leave out anything that'll complicate your life. I will say that a 10mm speed wrench will make your life better when removing the bolts on the underside of the cross brace. If you remove the lower filter box, there's actually a hole down there that'll let you access the hard lines from the top a little easier.

Edited by bdbake01
Posted (edited)

Please keep us updated how this condenser is working, any noticeable difference from the original, etc.

 

Thanks!

Very early report says that it works just fine. My HVAC buddy is totally OCD, so I'm certain I got an excellent charge. He even used a digital micro pressure gauge on the leakdown check. We left the vac pump on (large residential unit) run the entire time we were screwing with the trans cooler, so I'd say we pulled every last bit out! I was waiting to hear a "POP!" from collapsing the condenser LOL. Had the gauge pegged at -15 psi (on the big gauge) so I'd say we got very near as we could to perfect. Added 2 oz oil.

 

On the ride home, roughly 1/4 mi, it was already too cold and had to back it off max. I'll check back when I get a few more miles.

Edited by bdbake01
Posted

Check in.

 

Drove it tonight to a movie outing with the fam (Wonder Woman, dude, goood movie!). Worked fantastically! Cut through the typical hot/humid KY weather like a charm!

Posted

Glad some of you are fixing your truck's. Save all your receipts and document your time. GM is going to pay for this if I have anything to do with it. I have contacted an attorney, the attorney general of my state and since I was recently helping my son shop for a used Ford truck, I let everyone know how poorly GM is treating current owners. Every lot had multiple 14/15/16 models on their lots, hmm, wonder why. Call your AG's people, power in numbers.

Glad some of you are fixing your truck's. Save all your receipts and document your time. GM is going to pay for this if I have anything to do with it. I have contacted an attorney, the attorney general of my state and since I was recently helping my son shop for a used Ford truck, I let everyone know how poorly GM is treating current owners. Every lot had multiple 14/15/16 models on their lots, hmm, wonder why. Call your AG's people, power in numbers.

Posted

Wow, bdbake01!

Awesome post, indeed!

I don't post much but that has to be one of the most helpful posts I've ever seen on a forum. Props!
Anyway, I don't have any new updates from GM customer service yet. I'll keep y'all posted.
Side note: It's f*ckin' hot down here... Damn you, GM...
Posted

Well that's great.... sent my truck in today to get my a/c looked At on my 14 silverado, and after reading all this and then them calling me and telling me that's the problem not happy!! But good news is will be fixed tomorrow with 100$ deductible, I have 92000kms and warranty is done at 100000kms ?

Posted

Well that's great.... sent my truck in today to get my a/c looked At on my 14 silverado, and after reading all this and then them calling me and telling me that's the problem not happy!! But good news is will be fixed tomorrow with 100$ deductible, I have 92000kms and warranty is done at 100000kms

Were they able to get you fixed up?

Posted

Update on my truck: After 90 days of being told the condenser was on back order, I left a review of the dealership on a social media website. Within an hour of doing so, I got a call from the dealership. The customer service person told me they had an aftermarket condenser in and would I be ok with that. I said yes. Yesterday afternoon they installed it and I now have cold air. I will let you know how it goes.

 

The service manager also talked to me after it was completed and told me that they got a bulletin from GM saying that over a half million trucks are affected by the condenser issue. Apparently the aftermarket is making up for GM's ability to supply condensers.

Posted

Update on my truck: After 90 days of being told the condenser was on back order, I left a review of the dealership on a social media website. Within an hour of doing so, I got a call from the dealership. The customer service person told me they had an aftermarket condenser in and would I be ok with that. I said yes. Yesterday afternoon they installed it and I now have cold air. I will let you know how it goes.

 

The service manager also talked to me after it was completed and told me that they got a bulletin from GM saying that over a half million trucks are affected by the condenser issue. Apparently the aftermarket is making up for GM's ability to supply condensers.

Yep. Not just making up, but possibly fixing it would seem. My aftermarket piece appears to be WAY more substantial than the OE piece.

  • Like 1
Posted

Update on my truck: After 90 days of being told the condenser was on back order, I left a review of the dealership on a social media website. Within an hour of doing so, I got a call from the dealership. The customer service person told me they had an aftermarket condenser in and would I be ok with that. I said yes. Yesterday afternoon they installed it and I now have cold air. I will let you know how it goes.

 

The service manager also talked to me after it was completed and told me that they got a bulletin from GM saying that over a half million trucks are affected by the condenser issue. Apparently the aftermarket is making up for GM's ability to supply condensers.

This is turning into the biggest design failure of the K2 generation. It is not if, but when the line fails on all K2 trucks. Hoping the newest redesign holds up better than the old add a bracket line.

Posted

Had the condenser in my 14 Silverado replaced this week to the tune of 800. Replaced with Tyc 4283.

 

Can you confirm that part fits 5.3L with trans cooler?

Posted

Glad some of you are fixing your truck's. Save all your receipts and document your time. GM is going to pay for this if I have anything to do with it. I have contacted an attorney, the attorney general of my state and since I was recently helping my son shop for a used Ford truck, I let everyone know how poorly GM is treating current owners. Every lot had multiple 14/15/16 models on their lots, hmm, wonder why. Call your AG's people, power in numbers.

Glad some of you are fixing your truck's. Save all your receipts and document your time. GM is going to pay for this if I have anything to do with it. I have contacted an attorney, the attorney general of my state and since I was recently helping my son shop for a used Ford truck, I let everyone know how poorly GM is treating current owners. Every lot had multiple 14/15/16 models on their lots, hmm, wonder why. Call your AG's people, power in numbers.

Yup!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined
  • Who's Online   2 Members, 0 Anonymous, 536 Guests (See full list)


  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...