Jump to content

Wireless charging

jrhoyt84
 Share

Recommended Posts

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
7 hours ago, David Ulbrich said:

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it only stated model year 2018 for that part.  He also said that it is so new that there is no price in the system for it yet either.

I was working with another member on this.  He took apart the wireless charging lid to a 2018 and compared to a 2017.  The connector end on the 2018 is different than previous years as to why they say its not backwards to compatible.  Not a big problem though as the circuits are identical in how they are delivered to the charger.  GM just used a different connector end.  You should be able to unpin the connector and transfer it.

  • Replies 557
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ed36rgz71
Ed36rgz71

Have S8+ with a case did this quick and easy just flip the rubber part and you're good to go    

8lugCT
8lugCT

Because the charger is positioned toward the back, and with the way the pad is, the bumper on the backside pushes the phone forward away from the charger. So reversing the mat allows the phone to be p

David Ulbrich
David Ulbrich

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it

Posted Images

Doug83 Enthusiast

Doug83

Posted
Posted (edited)

It is on this site. Look at member AlabamaBishop.   Has a very simple fix for this issue.   

The topic name is 

IPhone 8 & wireless charging pad

 

look on the last page and he has a video showing what to do. 

Edited by Doug83
rtreptow7 Enthusiast

rtreptow7

Posted
Posted
12 hours ago, pgamboa said:

I was working with another member on this.  He took apart the wireless charging lid to a 2018 and compared to a 2017.  The connector end on the 2018 is different than previous years as to why they say its not backwards to compatible.  Not a big problem though as the circuits are identical in how they are delivered to the charger.  GM just used a different connector end.  You should be able to unpin the connector and transfer it.

What do you mean by “unpin the connector and transfer it”?  Take the connector out of a 17 charging module and put it in a new 18 module?  Then put the 18 in your 17 truck? How do you “unpin”?

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

Yep, correct. Unpin and transfer the connector.

Most Connector have a CPA (Connector position assurance) lock and a TPA (Terminal Position Assurance). These are what needs to be removed in order to unpin. Having some small detail pick tools help for the smaller connector and cavities (pun intended). Lol.


Sent from my iPhone using Tapatalk

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted

So if you are able to get the module form an 18, transfer it to a 16/17 Console. The 16/17 Console harness plug will have a different looking connector but the same wires, circuits, Wire colors Etc. If you can’t unpin, you can simply cut/splice. But we want the factory look....

91b3361d4e42bca7f187cf08296dfe06.jpg

380ec76a32d59e0cf4efb772ee151c7d.jpg


Sent from my iPhone using Tapatalk

  • Like 1
David Ulbrich Enthusiast

David Ulbrich

Posted
Posted

I tried the removal trick and it did not work like in the video.  I think I am going to get the aftermarket freedom charge unit that is made for 2015 to 2017 sierras and yukons.  They also make a adapter that uses the factory plus from the cigarette lighter so no splicing of cables.

  • Like 1
Debo3883 Enthusiast

Debo3883

Posted
Posted

What removal trick are you talking about? I’d really like to be able to wirelessly charge my iPhoneX in my 2017 Denali. Any tips or tricks are appreciated. 

robsieb Enthusiast

robsieb

Posted
Posted
2 hours ago, Doug83 said:

I did the removal trick and my iPhone X works.

Tried it on my 2016 Sierra and no luck with my iPhone X. Wish I had access to an Android or anything else other than an iPhone. I’m starting to think the module I have may not be working but have no way to back that up. 

 

rtreptow7 Enthusiast

rtreptow7

Posted
Posted (edited)
4 hours ago, pgamboa said:

So if you are able to get the module form an 18, transfer it to a 16/17 Console. The 16/17 Console harness plug will have a different looking connector but the same wires, circuits, Wire colors Etc. If you can’t unpin, you can simply cut/splice. But we want the factory look....

91b3361d4e42bca7f187cf08296dfe06.jpg

380ec76a32d59e0cf4efb772ee151c7d.jpg


Sent from my iPhone using Tapatalk

So not only would I have to find the 2018 charging module to order, but I would have to get the right 2018 connector which I would guess is sold separately as its attached to the wiring in the truck. If I want to make it look factory clean and unpin the connector. I searched unpinning connectors on YouTube. It looks pretty simple. 

Edited by rtreptow7
  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
So not only would I have to find the 2018 charging module to order, but I would have to get the right 2018 connector which I would guess is sold separately as its attached to the wiring in the truck. If I want to make it look factory clean and unpin the connector. I searched unpinning connectors on YouTube. It looks pretty simple. 

I’m trying to locate the mate end connector to the module. :)


Sent from my iPhone using Tapatalk
  • Like 1
8lugCT Enthusiast

8lugCT

Posted
Posted
3 hours ago, Debo3883 said:

What removal trick are you talking about? I’d really like to be able to wirelessly charge my iPhoneX in my 2017 Denali. Any tips or tricks are appreciated. 

Look at the link on page 8

  • Thanks 1
SSam Enthusiast

SSam

Posted
Posted (edited)
2 hours ago, rtreptow7 said:

So not only would I have to find the 2018 charging module to order, but I would have to get the right 2018 connector which I would guess is sold separately as its attached to the wiring in the truck. If I want to make it look factory clean and unpin the connector. I searched unpinning connectors on YouTube. It looks pretty simple. 

Would you not take the 2018 connector off the module you purchase and put the connector from your original module on it?  

 

Another solution was mentioned in a thread where folks were replacing the mat with a 3 coil pad but can't find the thread anymore.  Maybe it got deleted for some reason...

 

-S

Edited by SSam
rtreptow7 Enthusiast

rtreptow7

Posted
Posted
47 minutes ago, SSam said:

Would you not take the 2018 connector off the module you purchase and put the connector from your original module on it?  

 

Another solution was mentioned in a thread where folks were replacing the mat with a 3 coil pad but can't find the thread anymore.  Maybe it got deleted for some reason...

 

-S

The new module will have the new style female end that is built in to it.  I don’t think you can take that out of the module?  Seems like it is built in. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • anthony2558
      Would this CV Shaft be bad?

      By anthony2558 · Posted

      Would this be normal or a worn CV Shaft? 51K miles 3.5" lift? Boots are intact and no visible leaks showing. Attached is a the video I took. Thanks     https://youtu.be/ZnW7PPRmjJY?feature=shared    
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      If everything checks out at the MAF, then the MAF is BAD, new or not.   You don't need a signal generator to troubleshoot this. PCM needs ALL powers and ALL grounds able to light a halogen headlight bulb - if it can light the bulb bright, then the wiring is good enough to run the PCM.   Best thing you can do for yourself is spend some time here: scannerdanner.com - Check out all his YouTube videos on similar issues. If you decide to subscribe it's the best bang-for-buck ratio in the automotive world, hands-down. He's got TONS of free vids on YouTube, too.
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      You got that Hengst D110??
    • contrabombarde
      2010 Avalanche 5.3 not running correctly after engine swap.

      By contrabombarde · Posted

      Yes, I used my multimeter to probe all of the wires at the MAF, both with the sensor connected, sensor disconnected, key on engine off, key on engine running, etc etc etc. I probed all of the wires again at the PCM, at the connectors, etc. All voltages are what they should be according to the service manual/wiring diagrams. All grounds are good, less than 20 millivolts from the battery negative under load. Both at the connector of the MAF, at the PCM connector etc.      I know this throws a pretty big wrench into things, but this truck was acting up before the swap. I don't have very much information, if any on what was causing it, but if you cleared all of the dtcs it would do the same thing where it would crank, fire, then die. And it would do the same thing a dozen or so times, and eventually it would start and run, but the difference is that it would run and actually be drivable. Whereas now if you can drive it at all, it goes into reduced power mode almost immediately, and even then it's not running correctly. When you come to a stop at a light it stumbles down to for 500 RPM before catching itself and returning to the smooth idle. And if you go more than about 50% throttle then it immediately goes back to doing the misfire thing.    Like I said, I know that throws a wrench into things, and unfortunately I was not able to pull any data or anything like that before I did this work, so I don't have much to go on.    I'm trying to not fixate on one particular thing as the cause of the problem, but it seems like all avenues are pointing me towards the PCM. Like I said I have tested the wiring extensively (see above), and during cranking the sensor does produce seemingly legitimate values at least according to my multimeter, but as soon as the engine fires those values quickly descend into gibberish. I've tried it with multiple different known working sensors, I have done literally every test I can think of multiple times on the wiring (probing the signals, probing the pins with the sensors unplugged, probing the pins at the PCM, voltage drop, voltage drop under load, continuity, ohms, and double-checking everything against the wiring diagrams/ proper values in the service data.)    Another thing that pushes me towards a possible PCM failure is, I have noticed in troubleshooting a little bit taking a break and coming back, that when I leave the truck to sit for a while and cool off, it starts and runs smoothly when I first start it up. However once it warms up. It starts having problems. For example, when I went out to the truck this morning after it had been sitting overnight, I was actually able to drive it down the block. And then once I got on the throttle a Little bit after going about a thousand ft, it started misfiring again. I pulled it back into the driveway, shut it down, and started it back up. It idled smoothly. As soon as I touched the throttle it did the misfire thing again. From then on as soon as I started it it would misfire. I shut the truck off and went to go get a coffee and do a bit more research. When I came back out I started the truck up and it immediately went into the smooth idle. After a couple of minutes of playing around with it, it would not idle smoothly anymore. Let it sit a couple of hours, rinse and repeat. This makes me think with temperature change something is going wrong inside the PCM. I have the PCM out of the 2007 donor vehicle and I'm thinking of getting a one-day subscription to the ACDelco programming service to try and program that and see if it helps.   Like I said, I'm really trying to not fixate myself on one potential cause, but it seems everything is pointing me towards PCM failure. I would really like to try to confirm that, but unfortunately I don't have an oscilloscope or a signal generator to do the GM service procedure where you feed 5 khz into the signal pin. 
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      Ahh, sorry about that - I got some bad info. Newdude is correct. That's what I get for working 13 hours straight ... on my "vacation", lol.   Should've checked the files I had instead of the internet.   Anyway ... this is GREAT news, since this would've been an absolute friggin nightmare to get working.   I don't think the lack of VVT is causing this - you've got another issue. Wiring, I'm betting.   I'm telling you right now, your computer isn't bad. If it worked before the swap, it's working now. You need to do some more (better) diagnostics and figure out exactly what you're missing. Did you test every wire directly at the MAF? Have 5V reference? Ground? If you're reading ZERO g/s, your Hz isn't much use - it's going to be the wrong value anyway. The MAF is not working, and you need to find out WHY.   I got this off the net, so VERIFY first: Pin A: Black (BLK) wire, Circuit 552, serves as the Sensor Return (Ground).  Pin B: Tan (TAN) wire, Circuit 472, carries the Intake Air Temperature (IAT) signal.  Pin C: Yellow (YEL) wire, Circuit 492, is the primary MAF Sensor Signal output to the PCM. Pin D: Pink (PNK) wire, Circuit 339 or 539, provides Ignition 1 Voltage (Power).  Pin E: Tan/Black wire, Circuit 552 or similar, often associated with the Intake Air Temperature ground or signal return.  Global-A list: https://postimg.cc/KKJnQC85    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...