Jump to content

Recommended Posts

Posted (edited)

Please watch/listen to this video. This is not my video, but my truck is making the exact same noise as the one in this video.

 

Please read the video discription, it is the exact same thing as mine, starts loudest at cold start, then fades away, but not totally away in mine.

 

I haven't really checked it out yet, just wondering if any of you have already come across this particular noise, as it is a very distinct noise. Kinda sounds like an old grandfather clock tick/tocking. Thanks.

 

 

Edited by 15_silverado
Posted

My 16 5.3 makes the same noise. I was just wondering the other day what that was as I don't remember hearing it over the first 10k miles.

 

Sent from my SM-G930V using Tapatalk

Posted

The chatter noise is the direct injection. That metallic clank sound is probably something in the belts. It sounds like it happens once per revolution of the accessory drive system.

Posted

Valve lifter knock or injector, this will occur until valve lifters fill with oil, as they leak down when engine is at a 4hr cold soak. They fill within 30 seconds of running, but sometimes if there was traped air oil "foaming" they can make a knocking noise for closer to a minute.

 

It sounds like an engine rotational sound, it could be the tensioner pulley?

 

Listen at the front of engine with a hose, then the valve cover to close in on the sound. Do it when the engine sat cold for 4hrs though.

 

 

Thxs

Posted

I really don't think it's anything to do with the lifters or valve train. And it's not a normal DI sounds. It sounds like an accessory to me, most likely the vacuum pump. I just haven't had a chance to check it out yet, I'll put a mechanics stethoscope on it to narrow down where it's coming from.

 

It's a distinct sound, that's why I was wondering if anyone had this.

 

Thanks all.

Posted

My 16 5.3 makes the same noise. I was just wondering the other day what that was as I don't remember hearing it over the first 10k miles.

 

Sent from my SM-G930V using Tapatalk

If you go to the dealer for this, or figure out what it is, please let me know.

 

Thank you.

Posted (edited)

If you go to the dealer for this, or figure out what it is, please let me know.

 

Thank you.

I've been to the dealer over 20 times in 9 months for this truck. If I come in and tell them I hear another noise they will tell me I am crazy. I noticed it this morning when it was cold start, but didn't hear it once it warmed up. It is a distinct noise with a pulse about once every 1/2 second. I would think it was just normal if it had always made this noise.

 

Sent from my SM-G930V using Tapatalk

Edited by ShamrockShooter
Posted (edited)

 

I've been to the dealer over 20 times in 9 months for this truck. If I come in and tell them I hear another noise they will tell me I am crazy. I noticed it this morning when it was cold start, but didn't hear it once it warmed up. It is a distinct noise with a pulse about once every 1/2 second. I would think it was just normal if it had always made this noise.

 

Sent from my SM-G930V using Tapatalk

I hear you. I got a mechanics stethoscope coming, I'll poke around with it to narrow down where it's coming from. I'll let you know, but it may be a while.

 

It's probably not serious, but it can't be normal because not many other trucks make this same sound, or more people would have commented on this, it seems we're just lucky!

Edited by 15_silverado
Posted

Oh, and the guy that originally made the video hasn't answered any comments/questions on it, so I don't know if he ever figured it out.

Posted

Oh, and the guy that originally made the video hasn't answered any comments/questions on it, so I don't know if he ever figured it out.

Lucky? Sure. I guess that is one way to look at it... lol.

 

I first heard it when I was checking for exhaust leaks from my new exhaust. Sounded real loud when your head is under the truck near the front of the exhaust.

 

Sent from my SM-G930V using Tapatalk

  • 1 month later...
Posted

I had the same noise(squeak chirp) on my 2016.

After numerous attempts this is what my dealership found. And it fixed it.

post-132382-0-80510600-1497017731_thumb.jpg

post-132382-0-80510600-1497017731_thumb.jpg

post-132382-0-80510600-1497017731_thumb.jpg

post-132382-0-80510600-1497017731_thumb.jpg

  • 1 year later...
Posted

I know this is an old thread, but has anybody determined what this sound is? My 18 makes the same sound.  

Posted
I know this is an old thread, but has anybody determined what this sound is? My 18 makes the same sound.  

[mention=126037]Haider320[/mention] I was just going to send you a message to make sure you saw the video in the first post. It certainly sounds like what you were describing by a blinker type noise. The post above yours says they replaced the high pressure fuel pump and it fixed the issue for another member who was experiencing the same noise.
Posted (edited)
7 hours ago, 300 Blackout said:
10 hours ago, haider320 said:
I know this is an old thread, but has anybody determined what this sound is? My 18 makes the same sound.  

 

[mention=126037]Haider320[/mention] I was just going to send you a message to make sure you saw the video in the first post. It certainly sounds like what you were describing by a blinker type noise. The post above yours says they replaced the high pressure fuel pump and it fixed the issue for another member who was experiencing the same noise.

Yes, thanks.  I just read that.  On the YouTube link, there are several guys saying they have the same sound. Either GM has some faulty fuel pumps, or some of them just sound like that. My best friend has an 18 and he says his makes the same sound like mine.  Kinda like the vibration issue.  Some have it, some don't. 

Edited by haider320

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • If one can't be found, a good automotive upholstery shop should be able to replace/sew in a new panel where the damage is on the old cover. It might not be the cheapest option..
    • Does your dealer charge you for the tire rotation on top of the oil change price ?. I haven't had any service work done at my dealer yet other than when I brought it back soon after owning it to have the front end aligned to correct the steering wheel being off center a bit. Oh they called me at least twice hounding me to bring it in for an oil change and pushing a 300.00 package of oil change and tire rotation and whatever other quick simplistic checks they would do. Only going off of what a friend gets charged for his half ton for the basic oil change and its the same amount of oil as the L8T holds, it was about 150.00. Once one buys a set of tires from most shops these days or so I believe, they will do free tire rotations and some do free tire balancing as well as free tire repairs.    Certainly doing a tire rotation is no five minute job, and definitely not at home but because I run a set of winter tires on their own wheels, I swap them at home and its a one tire at a time deal because of the tire season swap although I jack up the rear and do it and drop it back down and then raise the front and do them and coordinate the tire rotation into that process for both sets of tires. I am using a floor jack though and if I need to raise both ends at once I use a couple sets of jack stands to have all four tires off the ground. I use either an air impact or battery impact and have electric impact as well so no shortage there of easy methods to spin the lug nuts, and then retorquing the lug nuts. None of it goes quick though but my wages are cheap though ... zero. I live an hour out of town, its easier just to do things like that myself than waste a bunch of time in town and having to make an appointment and probably a special trip and sit there at the tire shop waiting for them to get my vehicle in and get it done and not screw something up in the process. 
    • I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
    • Best part of this video is how it resets expectations. Wonderfully done piece. It also made clear a few points I've made from day one. Detergent oils DO NOT KEEP A MOTOR CLEAN at the recommended or longer change intervals. They just get dirty slower than a non-detergent oil and there isn't spits difference between them on this point if they carry the DEXOS license. Great thing about the license that gets missed is it assures CONFORMITY even it that means a low bar.    One thing he did not talk about that I paused on an magnified was the condition of the oil ring separator. Besides a stuck ring a plugged separator and land drain back is huge when it comes control. We see in short order improvement in control IF that is the problem.    Another item I took exception to and he did not make plain was the condition of the timing chest and under valve cover having something to do with indicating piston cleanliness. Schaeffer's Oil makes that same omission in their million mile Ford video. I'm guessing he has never torn down a Red Line HP, AMSOIL SS motor that has been on that diet from the get. What he showed in the video was a good deal of varnish. Something totally absent in Peppers 165K cover off look. I smiled because he did his at the same milage.    He also makes the mistake of assuming oil temperatures in the pan are the temperature all over the motor even though he makes note of the piston being the hottest part of the engine. that baffled me a bit.    I can tell you from personal experience and witnessing teardowns of family motors that even oils of the 1960's would keep them squeaky clean when OCI's were 1500 to 2000 miles without exception. At 3K and above you get what he experienced and the longer you leave it the quicker to gets to the junkyard.    I think his is missing a opportunity not tearing it down again when he's done killing it. Time would be his only cost. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...