Jump to content

Service 4wd

Macken0310

By Macken0310
in Troubleshooting & Recalls

 Share

Recommended Posts

Macken0310 New Member

Macken0310

Posted
Posted

So, yesterday afternoon, I jump in my tuck after running errands. service notice flashes says "service 4wd" I dis miss this, check my 4wd knob and its in AWD, where it stays unless I need 4wd. I go to back up and turn and its clear Im in 4wd. Cannot get it out of 4wd. Tried running through 2wd/4hi/4lo etc. nothing no shifting at all. I drive a lot so my truck is at about 54K (its a 2015, bought in 2015) and I have had no issue with it so far. great truck. no complaints. So, I drive into town today, call the dealership (who at first said they couldn't look at it till Tues- wed) they eventually say they can squeeze me in today around 2. Great! I think this is great. Still under warranty, if it has to be messed up better now then in 6k more miles right!- but wait. looking up their warranty the most likely culprits (wiring, tccm etc) aren't covered under warranty. Really. with so many others having this problem?... I can accelerate and drive it, turns are irritating. Seeing that there aren't any real "fixes" for this since 2014 not a good start to this week. Anyone find anything that seems to have stopped this action from reoccurring?

diyer2 Senior Enthusiast

diyer2

Posted
Posted

I wouldn't run it in AWD all the time.

2WD would be my choice.

:happysad:

joshc64311 Enthusiast

joshc64311

Posted
Posted
4 hours ago, Macken0310 said:

So, yesterday afternoon, I jump in my tuck after running errands. service notice flashes says "service 4wd" I dis miss this, check my 4wd knob and its in AWD, where it stays unless I need 4wd. I go to back up and turn and its clear Im in 4wd. Cannot get it out of 4wd. Tried running through 2wd/4hi/4lo etc. nothing no shifting at all. I drive a lot so my truck is at about 54K (its a 2015, bought in 2015) and I have had no issue with it so far. great truck. no complaints. So, I drive into town today, call the dealership (who at first said they couldn't look at it till Tues- wed) they eventually say they can squeeze me in today around 2. Great! I think this is great. Still under warranty, if it has to be messed up better now then in 6k more miles right!- but wait. looking up their warranty the most likely culprits (wiring, tccm etc) aren't covered under warranty. Really. with so many others having this problem?... I can accelerate and drive it, turns are irritating. Seeing that there aren't any real "fixes" for this since 2014 not a good start to this week. Anyone find anything that seems to have stopped this action from reoccurring?

Let me know what you find out

Macken0310 New Member

Macken0310

Posted
  • Author
Posted

Scan showed c0398 code- transfer case control module- tsb outlines that if you have a c0398 code you've probably also had/have c0392 and c0396 codes, i believe. That might not always be the case. They checked for updates and cleared the code. They did cover it under warranty and it's currently in 2wd and working normally, however, I haven't tried switching between 2wd/4wd and I've left it in 2wd instead of awd. (Other post say to leave it in 2wd unless 4wd is needed then be sure to switch back to 2wd before turning truck off-so im trying that logic). This fixes it today, but isn't signed off as a permanent fix by dealer. 

Mr. Z71 Enthusiast

Mr. Z71

Posted
Posted (edited)

When DTC C0398 sets, the vehicle is permanently locked in 4HI and cannot be shifted out of it while the code is present. This is a software problem. The fix is a software update. Had my 2015 updated and no more problems. It is service update 28770.

 

See this...

 

https://gm.oemdtc.com/7291/28770-service-update-4wd-ips-drift-dtc-c0398-4hi-lock-up-2015-2016-cadillac-chevrolet-gmc

 

Edited by Mr. Z71
remove duplicate wording
  • 10 months later...
NickyNorker New Member

NickyNorker

Posted
Posted

I have a 2015 Silverado 1500 and just had to deal with the "service 4wd."  It seems that driving in "auto" for more than 1.5 hrs can cause this issue. We had a terrible rain storm a few days ago and I was stuck in traffic for 2hrs with the "auto" selection on. I didn't realize there was an issue until I tried turning into my driveway, it felt like I was in 4wd. After reading numerous posts I tried everything, disconnecting the battery, pulling the 30amp 4wd trec fuse... and nothing worked. I took it to the dealer and they had to reprogram the TCCM. 2 codes came up: C0398 and U0403. I got tagged $130 for the diagnostic fee but that included the reprogramming. I hate having to go the dealer but didn't have any other choice and I'm out of warranty so I ate it. Going forward, I was told to avoid this issue again, don't drive for more than an hour in "auto" and when you are shutting the truck off put it back in 2wd.. hope this helps

  • 5 years later...
Gator567 New Member

Gator567

Posted
Posted

I have the same problem with my 2016 Sierra . I watched a u-tube video on how to reset the computer & clear the 4x4 service light . I followed the instructions & got it working ! Of course I didn't write down the procedure & now I can't find the video ! Now that I see what issues other people are having ; I can see where I'm going wrong . Apparently you MUST shift to 2 wheel drive BEFORE you shut the truck off !! Talk about stupidity !! If & when I get this system reset I will definitely pay attention ! Thank you for all the great info !

  • Thanks 1
  • 10 months later...
Anthonywar New Member

Anthonywar

Posted
Posted (edited)
On 10/30/2017 at 6:51 PM, joshc64311 said:

2015 Silverado 1500 5.3 4x4 service light. In the power link box I pulled the fuse number 6 I heard the transfer case engage and put it back in and it reengaged but it fixed the service 4wheel drive not sure how long it will be fixed but I was able to take it from 4h to 2wd. Might help someone

 

Edited by Anthonywar
  • 4 months later...
brokyle1959 New Member

brokyle1959

Posted
Posted

So are these problems that happen in cold weather?  I have been experiencing similar problems but only in cold weather and a older battery?  And have had simpler codes of low voltage show up.  Is it as simple as replacing the battery that can keep enough amps going to everything that is constantly drawing power?  I am asking for any and all input.  I am obviously going to rest the computer and replace the old battery.  It starts fine but I have seen weak alternators cause a lot of problems.  And yes I am a experienced heavy equipment mechanic and welder.  So let's have real conversations please 

  • 10 months later...
Villanyy25 New Member

Villanyy25

Posted
Posted

I have a 2015 Sierra and about 3 weeks ago it got really cold ended up needing to get a new battery and that’s when the service 4wd code came up . I got on here and someone posted about the number 6 fuse and it work . Thanks 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • nfisherman
      Software Update

      By nfisherman · Posted

      Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...