Seat memory fix?

[Thagsolot]

I recently bought a used 2016 sierra 1500 GMC, and was given only one key and fob.  I purchased an extra key and fob.  The fob originally given to me says it is key 2 and immediately goes to the old owners settings.  I can save a new setting but each time i get in it goes back to his setting and i have to hold down the 1 for mine.  Is there a way i can delete or reset this feature to where it only kniws me?  Thanks for any info.

[Tahoe02]

Did you buy the truck as a CPO from a GM dealer. If so then the Dealer has to provide 2 OEM FOBs programmed to your vehicle. From 2015+ I don't believe the key FOB has 1 or 2 on the FOB at least my Tahoe does not. Maybe there were no FOBs and they programmed the wrong FOB. Driver 1 and Driver 2 should be programmed with the 1 and 2 on the drivers door lower front door panel. Set one FOB(seat position and mirror) with the door 1 button, remove that FOB from the truck and then do second FOB with the door 2 button. Also look at the owners manual for that procedure. If you do not have one you can download one or buy one from Ebay. Good. luck.

[Sierra706]

I recently bought a used 2016 sierra 1500 GMC, and was given only one key and fob.  I purchased an extra key and fob.  The fob originally given to me says it is key 2 and immediately goes to the old owners settings.  I can save a new setting but each time i get in it goes back to his setting and i have to hold down the 1 for mine.  Is there a way i can delete or reset this feature to where it only kniws me?  Thanks for any info.

Why don’t you save your settings into 2?


Sent from my iPad using Tapatalk