Jump to content

Recommended Posts

Posted
3 hours ago, graystonelbz said:

weather has nothing to do with it, this has been overblown nonsense from the beginning.  Certain folks are being exposed. Locking down LA until July is a purely political move aimed at the election and other states are doing the same. It seems like everyone is coming around to what I said a month and a half ago....They were lying about the death toll. Just now they are taking deaths away from the count lol. I and others were told mentioning that was purely Fox new conspiracy. And now here we are and that's exactly what happened. Over 82% of deaths in my state are in nursing homes, those should have been the best protected places since the initial outbreak in Washington. Do you think weather played a role on those deaths? I do residential construction, business never stopped and I can't tell you of a single solitary person who got this virus because they continued on working and living life as normally as possible. And its a good thing they kept working when they could because there will be another mortgage crisis to follow that is going to be devastating to this industry. I hope many of you have learned a valuable lesson about the intentions of the US mainstream media. They and some other corrupt party attempted to destroy the economy solely because they don't like the orange guy. But hey, do you know what would really help the country now? How about we send free money to illegal aliens, have a mass release of prisons, maybe give large amounts of money to Cannabis stores, more money to planned parenthood, or even mail in voting. That all is directly connected to the virus crisis right? What a bunch of frauds, biggest scam in American history.

What state are you in that allowed residential construction during the stay at home stay safe weeks?

I think Florida did.

Posted
40 minutes ago, graystonelbz said:

You don't vote here and are not affected by this country's policies. I don't care what's happening where you live.

I think this statement requires some more research.  These two countries are significantly impacted  by each other.  The physical proximity alone is cause for mutual considerations. On a personal level, I have immediate family as citizens in both countries and we take a keen interest in and care about the politics of both countries.  This thread is about the Coronovirus which has very little respect for borders! ? 

  • Like 2
Posted
51 minutes ago, Ithan Henry said:

1)  What data do you have supporting this?

 

2)  So if you don't see it firsthand it must not exist?  Hmmmm.

 

 

3)  You should do some research as to what caused the first mortgage crisis.

 

I think what people are forgetting is that the Great Depression didn't destroy us.  In fact, we came out stronger afterwards.  The mortgage crisis didn't destroy us either.  Stop acting like we can't rebound from this like we have everything else.

I thought the Great Depression only ended because of WWII. If we are heading into a depression, I certainly hope that won't be the solution this time. 

  • Like 1
Posted
2 hours ago, Ithan Henry said:

1)  What data do you have supporting this?

 

2)  So if you don't see it firsthand it must not exist?  Hmmmm.

 

3)  You should do some research as to what caused the first mortgage crisis.

 

I think what people are forgetting is that the Great Depression didn't destroy us.  In fact, we came out stronger afterwards.  The mortgage crisis didn't destroy us either.  Stop acting like we can't rebound from this like we have everything else.

1. Yes, countries with summer seasons and mild weather also are dealing with this virus.

2. With no one being honest or correct with anything that has gone on with the debacle I only believe what I see yes.

3. I lived through the past mortgage crisis ans a GC so I'm well aware of what caused it. The factors are not the same, not arguing that. But we didn't have 30 million people out of work completely for 3-6 months. And not all of those industries will be allowed to come back at full steam. Many people will lose their business permanently and a strong possibility that they will have no job to return to. A great part of the country was not affected by the previous crash, this time it directly hits everybody. No industries were completely shut down for anywhere near this length of time. In time we will bounce back, but not really at the same time...where do you think all these bailout dollars come from. You seem to be the one who should research how finance and the economy work bud.

Posted
1 hour ago, graystonelbz said:

A great part of the country was not affected by the previous crash, this time it directly hits everybody. No industries were completely shut down for anywhere near this length of time. In time we will bounce back, but not really at the same time...where do you think all these bailout dollars come from. You seem to be the one who should research how finance and the economy work bud.

Actually, considering that a type of predatory lending aimed at the lower and middle class caused the last crisis, there were more people affected than you lead on. This time it still affects the lower and middle class more than anything. 

 

Oh, and seeing as how you previously stated that you don't care what happens in other countries, you might wanna look up isolationism and see how well that works......Bud.

  • Like 1
Posted
2 hours ago, Cpl_Punishment said:

I thought the Great Depression only ended because of WWII. If we are heading into a depression, I certainly hope that won't be the solution this time. 

There's debates about what truly ended it. Some give credit to Truman's administration policies after the war. WWII actually sent out national debt through the roof. Not to say the wartime production didn't help, but it wasn't the sole factor in ending the depression.

  • Like 1
Posted
2 hours ago, Ithan Henry said:

Actually, considering that a type of predatory lending aimed at the lower and middle class caused the last crisis, there were more people affected than you lead on. This time it still affects the lower and middle class more than anything. 

 

Oh, and seeing as how you previously stated that you don't care what happens in other countries, you might wanna look up isolationism and see how well that works......Bud.

I can't see what point you're trying to make here, I can only conclude that you are completely detached from reality

Posted
7 hours ago, graystonelbz said:

So during this whole thing we are being told to trust the science.  Why don't we listen to the science when it clearly says that men can't be women and vice versa? Obviously there is no science that says anything to the contrary. We live in an age where we apply science when it fits our need or a narrative, but not when it doesn't fit a political or social agenda....Hmmmmm

Right, science politicized is not science at all.  The left does not believe in science, they believe in tyranny and will lie about anything and everything to relentlessly advance that cause.

  • Like 2
Posted (edited)

Didn't need me to put this tread in the ditch. 

:crackup:

 

 

 

 

 

Edited by Grumpy Bear
  • Like 2
Posted (edited)
9 hours ago, SSchup said:

What state are you in that allowed residential construction during the stay at home stay safe weeks?

I think Florida did.

Minnesota, it was tough to get certain remodel inspections for a couple weeks, but most cities allowed facetime or the like for those. New construction has started to slow but was never forced to shut down. We do everything from new homes to smaller quick jobs  like siding, roofing and windows. I expect the new home market to come to halt by fall. Many new subdivisions have been put on hold around here, lots of uncertainty.

Edited by graystonelbz
Posted
9 hours ago, Donstar said:

I think this statement requires some more research.  These two countries are significantly impacted  by each other.  The physical proximity alone is cause for mutual considerations. On a personal level, I have immediate family as citizens in both countries and we take a keen interest in and care about the politics of both countries.  This thread is about the Coronovirus which has very little respect for borders! ? 

No, it doesn't require research. Canada and the US are not the same country no matter their proximity. They do not share a political system or elected officials. You are commenting on a political comment which I have nicely pointed out doesn't involve you.

Posted
13 hours ago, graystonelbz said:

Minnesota, it was tough to get certain remodel inspections for a couple weeks, but most cities allowed facetime or the like for those. New construction has started to slow but was never forced to shut down. We do everything from new homes to smaller quick jobs  like siding, roofing and windows. I expect the new home market to come to halt by fall. Many new subdivisions have been put on hold around here, lots of uncertainty.

In Michigan they shut construction right down March 24th completely if it wasn't critical infrastructure work. I'm a flatwork contractor and we were shut down due to no redi-mix plants delivering. Our Governor let Landscapers go back to work 2 weeks before construction. She let construction open May 7th, I said screw it and went back a week earlier. Not sure how new construction is going to fare but I'm busy with private work. Seems as though people are wanting to spend money on upgrades for their homes. I'm booked at least into August right now.  

Posted

Over the weekend I saw what happens when the government over reaches in in places like New York and New Jersey. People throw caution to the wind and basically go nuts. They have to get out, damn the torpedos. Where In places like Texas and apparently Georgia and Florida. People stick to guidelines when opening. Because people are trustworthy and don’t feel oppressed. In the 4 times I ate out people were behaving like instructed, following guidelines. Things are looking good so far.

Posted
53 minutes ago, KARNUT said:

Over the weekend I saw what happens when the government over reaches in in places like New York and New Jersey. People throw caution to the wind and basically go nuts. They have to get out, damn the torpedos. Where In places like Texas and apparently Georgia and Florida. People stick to guidelines when opening. Because people are trustworthy and don’t feel oppressed. In the 4 times I ate out people were behaving like instructed, following guidelines. Things are looking good so far.

I just saw on CNN just minutes ago a notable uptick in Texas new cases. One of the 17 states showing an up trend. Up from 7 states week prior. Some lower 48 state map being trotted out.  

  • Like 1
Posted

Question for the group. IF your going to toss the CDC under a buss and not trust them then whom do you think has the technical expertise to do what they do? Whose the replacement? 

  • Like 1
Guest
This topic is now closed to further replies.

  • Latest Articles

  • Posts

    • Would you supercharge the 6.2L on a 2021 GMC Yukon Denali XL with ProCharger?.... 605HP is the stated number without going crazy - it's not the LT4 682HP package, but I'm tempted to install it... This vehicle was ... not... recalled on the engine swap - but I don't really know if that means ...don't do it... or do it;)    Maybe i should start a prediction market pool on it in case it blows up;)   Any thoughts appreciated - I already OWN the supercharger - stopped the installation when the recall was announced and now it's taking up space in storage until I can solve an electrical issue with the vehicle...  4th GMC suburban-equivalent truck - I like them a lot - when they don't a) discharge their batteries randomly, or b) throw a rod at highway speeds;)
    • We tested the sleep mode with an ammeter in series with the negative battery terminal - 30amp fused - so we do know the actual shutdown and non-shutdown current draws and timing of the shutdown sequence.  We just have no protocol information to determine what module is issuing the network keep alive.  
    • TrueBlue...Even if you don't have that info stuff displayed, If Mr. Computer thinks there's something you should know about, it will pop up a warning message no matter what else is being displayed. I keep the speedometer displayed all the time, yet the brake pad message pops up anyway.
    • BTW, the 11.5amp draw is all the usual systems active - it's not a single draw - that's the "we're all awake" state of the vehicle - forinstance if the power steps are actuated, the draw will spike to 22amps for that operation.  when the battery is disconnected and then reconnected, the vehicle shuts down that one time only - and we see a 10-15minute progression down 11.5  10.5  9. 8 6. 5. 1.6... 500ma... and then off to sleep at 40 milliamp... as expected.  So we know it's a module that is simply refusing to allow the SDGM to proceed to the sleep state.  We do NOT think it is the telematics VIM module - since we already duplicated the problem with the "VIM bypass" solution installed (we reverted that since it also disables the gmc app - but it does not appear that the telematics system is the culprit).  We've replaced the rear heater control module, tested without the wireless charger, and the other modules on CAN Bus 5 - but still something is keeping us awake and removing X2 from SDGM allows sleep to proceed.  We cannot diagnose from OBD since OBD drops off at about the 9volt level in sleep mode and we can't communicate with the vehicle - also we can't trace the SDGM internal packets from the OBD side - we have Autel Ultra.   Any ideas on why disconnecting X2 would allow sleep to proceed appreciated.  This is no longer a repair situation - this vehicie is simply unusable in this condition and NOBODY at GMC Dealer can even understand what it is doing.  This is crazy.  We made these systems too complex and now we're paying the price.
    • Did this ever get solved?   I'm chasing 2021 Yukon Denali electrical issues - vehicle will not enter sleep mode - we can disconnect and reconnect the battery and it will sleep - but that's likely because we powered down whatever module doesn't correctly sleep.  once we start/accessory the vehicle and turn off, it will stay at 11.5 amp draw with something keeping the SDGM alive - it appears to be activity on the X2 segment, specifically CAN FD Bus 5 - but we don't know which device and we think we've already isolated all of the devices on that segment - so what keeps the BCM and/or the SDGM alive is unknown.   I don't yet have a packet trace from CAN 5 (and since this Global B we might not get much info from it) - but the vehicle has been down for 8 weeks and previously GMC Dealer was unable to resolve "kills battery" issues with this particular vehicle - so I'm at a loss - it seems to be beyond local repair capabilities - and the number of "telematics keeps vehicle from sleeping" posts indicates this whole architecture has major issues - I hate to say it, but we might have to install a battery cutoff switch on the front grill - one of those red boat switches - to turn off the vehicle.;)  Any pointers appreciated;)  I just bought a CAN FD interface and I'm planning to try Savvycan and Peak Can SW to triage this further.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...