Jump to content

Clogged AC drain

TMD
 Share

Recommended Posts

TMD Enthusiast

TMD

Posted
Posted

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

chadman
chadman

Interesting. They can usually be cleaned out through the drain hole. Would have to be something misassembled or misaligned with it being so new. Dash tear downs usually leave you with squeaks and ratt

batman900
batman900

Any way to prevent this from happening? Anyone have a pic of where to snake from if it does clog?

TMD
TMD

I have never had it happen on any other vehicle I have owned, so your guess is as good as mine. I drove less this spring because I ended up working from home - that might have had something to do with

Posted Images

chadman Enthusiast

chadman

Posted
Posted

Interesting. They can usually be cleaned out through the drain hole. Would have to be something misassembled or misaligned with it being so new. Dash tear downs usually leave you with squeaks and rattles. Good luck.

  • Like 1
BIGDOGx Senior Enthusiast

BIGDOGx

Posted
Posted (edited)
19 hours ago, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

Edited by BIGDOGx
TMD Enthusiast

TMD

Posted
  • Author
Posted (edited)
9 minutes ago, BIGDOGx said:

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

Edited by TMD
BIGDOGx Senior Enthusiast

BIGDOGx

Posted
Posted
26 minutes ago, TMD said:

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

I wish you luck, to have some piece of mind one of those guys on here who did have his dash taken apart did comment that the tech did a rather good job of reassembling it and doesn't think it will be an issue down the road.

BlancoSilverado Enthusiast

BlancoSilverado

Posted
Posted

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

ejdziurka Enthusiast

ejdziurka

Posted
Posted
On 7/1/2020 at 3:40 PM, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

TMD Enthusiast

TMD

Posted
  • Author
Posted
18 minutes ago, ejdziurka said:

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

The only real symptom is water draining onto the floor of the passenger side... It must be getting trapped, pooling up, and then draining when I turn left. It sort of makes a sizzling sound because it's draining through the hot blower motor (which I'm sure will fail now too). Everything else seems to be fine. The A/C is still nice and cold. 

TMD Enthusiast

TMD

Posted
  • Author
Posted
On 7/2/2020 at 12:24 PM, BlancoSilverado said:

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

Interesting. I'm not sure why the techs couldn't do that instead of removing my dash?? 

  • 2 weeks later...
GF7PE Enthusiast

GF7PE

Posted
Posted

I thought I was the only one. Just got mine back from the dealer after 10 days. Truck has less than 4000 miles on it. My issue wasn’t a clogged drain but no hole cut in firewall for the drain to go through.


Sent from my iPhone using Tapatalk

TMD Enthusiast

TMD

Posted
  • Author
Posted

Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

GF7PE Enthusiast

GF7PE

Posted
Posted
Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

Lucky. Mine was completely ripped out and have only had it for 4 months. Seems ok so far and other than a bunch of fingerprints on the center of the windshield


Sent from my iPhone using Tapatalk
batman900 Enthusiast

batman900

Posted
Posted

Any way to prevent this from happening? Anyone have a pic of where to snake from if it does clog?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,716
    Total Members
    8,960
    Most Online
    BDS my HD
    Newest Member
    BDS my HD
    Joined

  • Who's Online   1 Member, 0 Anonymous, 566 Guests (See full list)

  • Latest Articles

  • Posts

    • BDS my HD
      Brand new to this forum. Questions about re-gearing my 26’ HD

      By BDS my HD · Posted

      Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • linc45bn
      2013 2500HD 6.0L intermittent no crank no start

      By linc45bn · Posted

      I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • Grumpy Bear
      first oil change - 2026 2500HD gas

      By Grumpy Bear · Posted

      No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • Grumpy Bear
      Oil Consumption

      By Grumpy Bear · Posted

      How about them NICKS!!! 
    • Peoplemvr
      GMC 1500 Illuminated Front Grill Emblem REPLACEMENT.

      By Peoplemvr · Posted

      Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...