Jump to content

Make wireless charger bigger?

LordBulldog
 Share

Recommended Posts

LordBulldog New Member

LordBulldog

Posted
Posted

I just bought a 2018 silverado but my phone (Note 10+) is too wide to fit in to the tray and make contact for charging. Any ideas on a workaround? I just need the tray a little bit wider and I'm set! 

Mercracing Enthusiast

Mercracing

Posted
Posted
I just bought a 2018 silverado but my phone (Note 10+) is too wide to fit in to the tray and make contact for charging. Any ideas on a workaround? I just need the tray a little bit wider and I'm set! 

I have an iPhone XR, so I’m not quite sure how that equates to yours but here’s what I did. I unscrewed the bezel and dremmeled around the side to make it wider until my phone would drop through. I also had to trim the height of the plastic mat on the bottom so it would sit closer. I had a friend measure everything and he’s going to 3D print me pieces so it looks factory.

Side note, my phone has an otter box case.


Sent from my iPhone using Tapatalk
  • Like 1
xSHIFTxNASTYx Enthusiast

xSHIFTxNASTYx

Posted
Posted
10 hours ago, LordBulldog said:

I just bought a 2018 silverado but my phone (Note 10+) is too wide to fit in to the tray and make contact for charging. Any ideas on a workaround? I just need the tray a little bit wider and I'm set! 

I'm in the same boat as you and I don't even have the wireless charging lid on my jump seat. Note 10+ with an Otter Box doesn't fit so I have to just stick it in a cup holder since I haven't found a better mounting solution or cradle for it. Funny how that works though. Never big enough for a flagship phone. Granted, they probably made that area big enough for the biggest phones at the time but should have given more real estate considering every year phones seem to get bigger and bigger...

xSHIFTxNASTYx Enthusiast

xSHIFTxNASTYx

Posted
Posted
8 hours ago, Mercracing said:


I have an iPhone XR, so I’m not quite sure how that equates to yours but here’s what I did. I unscrewed the bezel and dremmeled around the side to make it wider until my phone would drop through. I also had to trim the height of the plastic mat on the bottom so it would sit closer. I had a friend measure everything and he’s going to 3D print me pieces so it looks factory.

Side note, my phone has an otter box case.


Sent from my iPhone using Tapatalk

........ I'm digging this idea. You just got me thinking now. I have a good buddy of mine that has a 3D printer..... Maybe I will do the same thing.

Ray Capobianco Enthusiast

Ray Capobianco

Posted
Posted
11 hours ago, Mercracing said:


I have an iPhone XR, so I’m not quite sure how that equates to yours but here’s what I did. I unscrewed the bezel and dremmeled around the side to make it wider until my phone would drop through. I also had to trim the height of the plastic mat on the bottom so it would sit closer. I had a friend measure everything and he’s going to 3D print me pieces so it looks factory.

Side note, my phone has an otter box case.


Sent from my iPhone using Tapatalk

have him do a run. Im sure 90 percent of the people on here would buy one for decent money. 

  • Like 2
Mercracing Enthusiast

Mercracing

Posted
Posted
i was curious to see a finished product on having a bigger or wider slot on the lid

I mean I can take a picture of my rough hack job. It doesn’t look the best, but my iPhone XR fits and aways charges. Still waiting for the 3D printed parts from my buddy.


Sent from my iPhone using Tapatalk
midwestdenaliguy Enthusiast

midwestdenaliguy

Posted
Posted
12 hours ago, Mercracing said:


I mean I can take a picture of my rough hack job. It doesn’t look the best, but my iPhone XR fits and aways charges. Still waiting for the 3D printed parts from my buddy.


Sent from my iPhone using Tapatalk

As mentioned, I'm sure if your buddy wants to make some $$ I'd happily buy his 3D console kit if it truly looks factory. I have a Google Pixel 3XL and it's *barely* too wide to fit in the cutout, super annoying. Post pics when you install it!

  • 6 months later...
  • 1 year later...
NewUsers Enthusiast

NewUsers

Posted
Posted

I just got this in over the weekend, gonna try to install it tonight. I'll let y'all know how it goes.

 

33.thumb.JPG.013684a0a815a20e6682abae7a0234e8.JPG

  • 3 years later...
dsharpe89 New Member

dsharpe89

Posted
Posted
On 7/20/2020 at 8:55 AM, midwestdenaliguy said:

As mentioned, I'm sure if your buddy wants to make some $$ I'd happily buy his 3D console kit if it truly looks factory. I have a Google Pixel 3XL and it's *barely* too wide to fit in the cutout, super annoying. Post pics when you install it!

Did you ever get this printed?

Nitrousbird Enthusiast

Nitrousbird

Posted
Posted

So these are pretty easy to find on eBay:  https://www.ebay.com/itm/317792903215?fits=Make%3AChevrolet&_skw=For+2015-2018+Chevrolet+Silverado+Wireless+Charger+Tray+15W&itmmeta=01KHBXW6JMN15TT4JPS5PFEFQ0&hash=item49fdeee02f:g:B4EAAOSwOB1oHBJb&itmprp=enc%3AAQALAAABIGfYFPkwiKCW4ZNSs2u11xBosOND%2BaIMnRIoNs8WxBNcXvOXRp5E8FApOWKjBDT9v9vIl8N%2FjKZIf3SGxNNK461CEvyMkiCGGniGrf%2FzA5OoYSowhRpn0SH0DfOj8df6Ddyc6N9G7KkHqX3bZ2xYfk0itM%2Bg1XL5bDm1v9LA7B%2BtlSRh97oMpM%2BNlDF8LiCrlh9eKwYZ8n43yfiOx1ucmbMdxR14joDg5Qtq38c92XhnWOU00e4PD00%2BjzwqKQ33Mm6hi31Myy3XE8CvnUO2egtUdVjbyMU8cxyL4%2F44qGmrETojo5%2Bxsmjr1c6wqBqK0sEY8EnWb46Pb2AzXXw6KUKMSB0zv7Puwv4UOIeiGAUnkfitJkTE4OahfHvV412V4A%3D%3D|tkp%3ABFBM_unw_Ypn

Anyone do the upgrade?  Even with the "improved" wireless charger in the 2018, it is absolute trash, and I never use it.  It is too slow and the tray is too narrow for modern, large phones (I rock a S24 Ultra currently).  

I'm also curious about this one:  https://www.amazon.com/CZmenghe-Compatible-2015-2018-Replacement-Accessories/dp/B0GLZB7MV2/ref=sr_1_5?crid=2D2H62KEHK0GW&dib=eyJ2IjoiMSJ9.rCjDHNGPtsOkRUUbdH0-4sfHNjikh-OTcqZ2U2Gl3g2LOUzDKVxKv6yPEYPr-e_x0eltka8MA7SrnlNFKAEF569RxBCoGYztErBMO91SxxrzXCdyd2nzR4HKJycb-MxQYctoEvEjZZPuDIVJsr4JFvOFcadq_ucU0invUjozXzIJiPQPiWonozgGFMmzjP0m_HsL0nZhBRdbzhC29JQotfBV-2C7DnVPMqmihJBviWs.oIPCF2YEj9A3MBXa0kz_UytSkjfiQr2AH6YEKg0Nsw4&dib_tag=se&keywords=2018%2Bsilverado%2B15w%2Bwireless%2Bcharger&qid=1771000411&sprefix=2018%2Bsilverado15w%2Bwireless%2Bcharger%2Caps%2C300&sr=8-5&th=1

More expensive but has the magent built-in as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   7 Members, 0 Anonymous, 1,139 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...