Jump to content

Recommended Posts

Posted

So I got a really good deal on my truck and my stupid ass didn't know until after I bought my vehicle that it had the single speed transfer case without 4 low. I just assumed since basically every GM truck I've had that was a 4x4 has had 4lo that this one did too. Plus I didn't care about Z71 package because I was going to upgrade the suspension anyway. Now I was thinking, since it seems like everything is identical in both 4x4 trucks other than the transfer case, couldn't one just be swapped in? I found a post on a Tahoe forum where someone with a 2012 Tahoe that had a single speed swapped to a dual speed and everything was identical other than the transfer case and the TCU 

Posted

I would bet physically they would bolt up. It would make financial sense for GM to have as much commonality as possible other than the actually physically different parts. 

  • 8 months later...
Posted

Summit white I just did the exact same thing. I love everything about the truck, was out in the bush, went to test my dealer lifted 4x4 badged truck with 33.2 inch Toyo RT tires. I pressed what I thought was a cool 4lo button with a picture of a truck crawling over rocks... In the same spot 4 lo is on every other ****ing Gm product and its something completely not 4 low 😡.   I love everything about the truck, and  would rather put the 2 speed tcase in it and have the perfect truck for me! I'm going to look into the swap aswell. I see you posted last year, have you come up with anything? I can't find anything about it. 

IMG_20210425_101517.jpg

Posted
44 minutes ago, Nick Gibb said:

Summit white I just did the exact same thing. I love everything about the truck, was out in the bush, went to test my dealer lifted 4x4 badged truck with 33.2 inch Toyo RT tires. I pressed what I thought was a cool 4lo button with a picture of a truck crawling over rocks... In the same spot 4 lo is on every other ****ing Gm product and its something completely not 4 low 😡.   I love everything about the truck, and  would rather put the 2 speed tcase in it and have the perfect truck for me! I'm going to look into the swap aswell. I see you posted last year, have you come up with anything? I can't find anything about it. 

IMG_20210425_101517.jpg

Welcome to the site.

 

Does your switch look like the one on the left, or right. Not really up to speed on the T1's, so asking out of curiosity. 

See the source imageSee the source image

Posted

They call that 'Terrain Mode'.

 

Manual has a couple pages of explanations about how it works / what it does. 

Some of the functions depend on what gear is selected.

 

 

Posted

I'm almost certain it would bolt right up, but the circuitry alterations to make it integrate with your truck seamlessly might be an issue.  Although I have the 2spd transfer case,  I'm curious to see if this is able to be done to a single speed transfer case vehicle of the 19-21 vintage.  It would be nice to be able to add that functionality to an off road truck, especially if buying used and its a simple upgrade.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • It really is comical when people don’t agree or see the reason some people prefer the older vehicles. They become condescending. All the while they may be busting their knuckles on old vehicles. I have found memories of swapping out engines in my old GM cars in a weekend without much hassle. Unlike today. One wrong move a computer will shut you down. Even on something as easy as a brake job. There’s a pretty comical YouTuber called the car wizard. A garage owner who puts it all in perspective. Another Vicegrip garage that’s shows just how tough the old stuff is. 
    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...