Whats needed to get upfitter switches installed? What parts?

[Transient]

Hello All,
 
I am looking to get upfitter switches installed in order to hopefully get pillar lights in the near future once I have some extra $$$, and maybe an LED bar as well and the speedturtle EFM 3.0.
Obviously, all these would need to be hooked up upfitter switches, but i dont have those. So, my question is, what is required to get the upfitter switches? What are the parts that I will need (and their part numbers please)?, how hard/easy is it to take the side dash apart where the switches will be installed? 
 
Hope someone can shed some light on this.

The only thing I haven't done on this list is the speed turtle 3.0. What questions do you have?

Sent from my SM-N960U using Tapatalk

[BlancoSilverado]

14 hours ago, Transient said:

I think you meant 25 and and 20 amp. Iirc, switches 1, 4, and 5 are 25 amp. Switches 2 and 3 are 20 amp. I forget the wire colors at the moment. If you're really pressed for an answer I can find some time to look at the wiring diagrams and tell you which wires are which switches.

Sent from my SM-N960U using Tapatalk
 

No, I did mean 20A and 30A (see link below). Maybe its supposed to be a 30A max, 25A continuous? 

 

https://www.gmupfitter.com/files/media/photo/1314/UI Bulletin 153_wip.pdf

[Transient]

No, I did mean 20A and 30A (see link below). Maybe its supposed to be a 30A max, 25A continuous? 

 

https://www.gmupfitter.com/files/media/photo/1314/UI Bulletin 153_wip.pdf

You want the updated bulletin. It's #153b. When I did the install I benevolent my fuse block came with 25 amp fuses in 1, 4, and 5, and 20 amp fuses in 2 & 3. But, what do I know? I only put the pieces together like a bunch of legos.

 

Sent from my SM-N960U using Tapatalk

 

 

 

[redwngr]

Revision C of the bulletin was published a couple weeks ago. 

 

https://www.gmupfitter.com/files/media/photo/1541/UI Bulletin 153c.pdf