Jump to content

Recommended Posts

Posted
2 hours ago, Unwrntd said:

ADD just came out with a diesel version of their bumper but I can't remember if it is winch capable or not.

The biggest issue I'm seeing is that none of the aftermarket bumpers fit diesel models. I'm guessing there's additional cooling unit or something in that space where the winch would go. 

Posted
2 hours ago, Unwrntd said:

Hey I know litebrite personally haha

 

That's awesome! They put out great content on youtube. Very entertaining. Next time you see them, let them know to keep up the great work, from a random guy on the GM forums, haha.

Posted

I'm a subscriber to Lite Brite Studios.  Love what Kevin and Brittany produce.  I followed the Gladiator build and saw the RTT setup.  I'll look into that.  Can't wait to see what they do with the Bronco.

Posted
1 minute ago, Transient said:

I'm a subscriber to Lite Brite Studios.  Love what Kevin and Brittany produce.  They heart my comments they few rare times I post up, which tells me they are very engaged with what their subscribers.  They play around near my brother's neck of the woods quite a bit.  He lives only 30 minutes from St George, UT.  Every time I'm up there I'm keeping an eye out for them.

 

I followed the Gladiator build and saw the RTT setup.  I'll look into that.  Can't wait to see what they do with the Bronco.

 

Posted
On 5/7/2021 at 8:22 AM, Unwrntd said:

Awesome thread!

 

Check out my build on IG @Adventure_Denali

 

I am currently building my 19 Denali 6.2 4x4

Current Mods:

 

Chassis Unlimited Octane front winch bumper

30" curved LED bar and 4x Pods (OffroadLEDs.com)

Warn VR-12 Winch

BDS 4" Lift

20" AT4 wheels with BFG K02s

Full size spare with BFG K02

Yakima Rack + Platform (Sold)

Bedslide 1000CL

ProEagle Kratos Jack

Retrax One XR Bed Cover

Zroad Ditch Lights

sPod Bantam

OEM transfer case skid plate

4x Rotopax fuel/water

Console and back seat locking boxes

Valhalla Offroad MAPS Panels

Desert Does it bottom seat mount panels

67 Designs Series 55 rails

ICS Fab Dash Platform

Auto Stop Eliminator

Multiprorocks tailgate Speaker System with 4x Polk Speakers

dee-zee tailgate assist

 

Parts on order:

Roof Rack: Alpha Foxtrot Designs

New Bed Rack: Xtrusion Overland

Rear Bumper: Chassis Unlimited Octane

Intake: Volant

 

Planned:

MaxTrax

270 degree awning
Roof Top Tent

waterport or something simillar

Redarc DC-DC Charger

Cascadia Hood mounted solar

Second Battery

Second Bantam

Portable Air

Pelican Cargo Cases

Additional undercarriage protection

GMRS Radio

More Lights
more Solar

 

 

 

Do the Valhalla Off Road MAPS panels interfere with the bed lights?  It looks like they might get in the way.  I'm considering these panels, but not 100% sold on them yet. 

Posted
On 5/9/2021 at 2:36 AM, Transient said:

I'm a subscriber to Lite Brite Studios.  Love what Kevin and Brittany produce.  I followed the Gladiator build and saw the RTT setup.  I'll look into that.  Can't wait to see what they do with the Bronco.

Already got my build date for my Wildtrack! :P

Posted (edited)

 

On 5/7/2021 at 2:03 AM, Transient said:

I'm originally from Utah, and would've loved to go on that adventure.  Currently in California, so it's not a stretch.  There is a video on YouTube of a guy that made his own hidden winch system with the OE front bumper on a T1xx.  Iirc, it was done on a High Country.  I'm considering starting with the Rough Country hidden winch setup for the 14-18 trucks, and modifying it to work.  I have a neighbor with a 2018 Sierra that'll let me look at his truck.  We'll see what happen.  Really looking hard at the tonneau covers and RTTs right now to find the right setup. 

I've seen that video and its very simplistic, clean, and well done.  I also found where an individual used a hidden winch mount from the prior generation silverado/sierra and was able to mount it to his T1 with minimal alterations, though he didn't explain what they were. 

 

Great setups on here guys, I love the full-size overlanding mentality!

 

I'm hoping to get some time off to fabricate up a hidden winch plate myself, but my work schedule is crazy right now and I don't know when I'll be able to weld one up.  After that is fabricating a quick-mount system for temporary awnings, preferably a 270.

 

So far, I've done the following:

Eibach front springs, and front and rear shocks

Installed VORR bed panels

Du-Ha under seat storage

X-Bull Traction Boards (used more times than I care to admit so believe the hype, an excellent purchase)

Upgraded Recovery Gear:  Treaty Oak kinetic rope, ARB Tow Strap, Factor 55 hitch, Rhino Shackles

Installed a Softopper, 

Downsized from 20" Bridgestones to 18" Duratrac's for more sidewall

 

Future Modes:

As mentioned above, a hidden winch system and quick-mount for an awning system.

 

I know it goes against the grain of RTTs that are so popular nowadays, but I prefer to camp on the ground as well as using my truck bed for dirt bikes and work.  However, I am definitely jealous of the amenities a RTT provides, DELUXE!!!

 

 

VORR Panel.jpg

20201223_125935 resized.jpg

20200808_181743-resized.jpg

Edited by Gangly
  • Like 4
Posted
On 5/10/2021 at 2:36 AM, Transient said:

Do the Valhalla Off Road MAPS panels interfere with the bed lights?  It looks like they might get in the way.  I'm considering these panels, but not 100% sold on them yet. 

No, they don't interfere with the lights.

Posted
18 minutes ago, Gangly said:

No, they don't interfere with the lights.

Thanks.  These are likely next after I get the bed cover situation sorted out. 

Posted
On 5/7/2021 at 12:32 PM, Icetracer said:

The biggest issue I'm seeing is that none of the aftermarket bumpers fit diesel models. I'm guessing there's additional cooling unit or something in that space where the winch would go. 

Typically the CAC (Charge Air Cooler) is in that space. I had the same issue with my Jeep Grand Cherokee Diesel. No winch mount would fit and most bumpers didn't either. 

 

Posted

The Retrax XR bed cover I ordered arrived today.  Got it installed so I could mock up where I need to modify it so it works with my sportbar.  Tonight concluded with removing the bed cover and disassembling it so I can start cutting first thing in the morning. 

Resized_20210512_191433.jpeg

  • Like 2
  • Thanks 1
Posted

Cutting is now done.  Time for welding, then off to paint. 

 

Sorry the pics are garbage.  I didn't realize the lens was dirty when I took the pics. 

20210518_184817.jpg

20210518_184800.jpg

20210518_184559.jpg

20210518_184726.jpg

20210518_184629.jpg

20210518_184613.jpg

20210518_184606.jpg

Posted
11 hours ago, Transient said:

Cutting is now done.  Time for welding, then off to paint. 

 

Sorry the pics are garbage.  I didn't realize the lens was dirty when I took the pics. 

20210518_184817.jpg

20210518_184800.jpg

20210518_184559.jpg

20210518_184726.jpg

20210518_184629.jpg

20210518_184613.jpg

20210518_184606.jpg

Nice Job.  Interested to see the final product.  👍

Posted

Since its an overlanding topic, I did a little driving and wound up camping inside of Sam Houston National Forest with some buddies this past friday evening.  I thought I was pretty careful but I still managed to give "Hank" a few truck length pin-stripes.  It was worth it though, I needed the time and distance from society.  :)    

 

20210515_095954-Resized.thumb.jpg.af29077517eaa1207d3bc8edaa793650.jpg

20210515_073920.jpg

20210514_202341.jpg

  • Like 1
Posted
3 hours ago, Gangly said:

Nice Job.  Interested to see the final product.  👍

Thanks.  First time doing something like this, and was very afraid that I'd end up throwing $1,500 in the garbage.  I'm glad it's working out well.  I'm going to call a few welders today.  Hoping to get it in their hands tomorrow. 

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...