Jump to content

Recommended Posts

Posted

I have a 2020 1500 Duramax and have had a fair amount of problems with it since I bought it. I had the windows leak, a coolant valve replacement, and now I have a P049E code (EGR valve?...this code is barely mentioned on the internet) that started today. I have to wait 3 weeks - 3 months to get service in my area. I didn't purchase an extended warranty when I bought and now I wish I had. Can I buy one from GM? If not, what are the good 3rd party companies? It's a 2020 model with ~17000 miles on it and under warranty at the moment. 

Posted

Yes you can still purchase a GM extended warranty or aftermarket

Posted (edited)

I was told by my dealer that you can buy an extended GM warranty as long as the vehicle is still within the factory warranty period.

Edited by Chevrolet1
Posted

I bought my Silverado over two years ago and I'm still getting e-mails from GM trying to get me to buy the GM extended warranty.

Posted

I have never ever in 30+ yrs gotten anything from GM encouraging me to buy an extended warranty.  That's more of a dealer offering and not all dealers offer the GM backed warranty.  Several dealers around here have another brand called Zurich?  They basically sell what makes them the most money...

Posted
8 hours ago, elcamino said:

I have never ever in 30+ yrs gotten anything from GM encouraging me to buy an extended warranty.  That's more of a dealer offering and not all dealers offer the GM backed warranty.  Several dealers around here have another brand called Zurich?  They basically sell what makes them the most money...

Zurich is the go to for GM/Chevy. I had it on my 2017 Silverado. Which was junk. When I traded the Silverado for the Sierra, I got most of my money back from Zurich. 

 

Posted
14 hours ago, redvettez06 said:

I have a 2020 1500 Duramax and have had a fair amount of problems with it since I bought it. I had the windows leak, a coolant valve replacement, and now I have a P049E code (EGR valve?...this code is barely mentioned on the internet) that started today. I have to wait 3 weeks - 3 months to get service in my area. I didn't purchase an extended warranty when I bought and now I wish I had. Can I buy one from GM? If not, what are the good 3rd party companies? It's a 2020 model with ~17000 miles on it and under warranty at the moment. 

Google GM extended warranty. The GM plan will pop up. It has all the info on all the warranty plans, service plans etc. You can even find the cost.

 

Posted (edited)

You can purchase a GM extended warranty anytime before the 3 yrs / 36,000 miles basic warranty expires, I am told by a local GMC dealer finance manager.  He recommended not waiting until last moment to avoid missing a date due to paperwork snafu's. Also he said, every fall the prices are adjusted upward. Whatever you buy starts on the date its effective, it is not added on the end of the GM new car warranty's.  If you have 1 yrs left on the basic and you buy a 3 yr warranty, you only have +3 yrs, not 4.

Edited by elcamino
Posted

Only get the GMEPP warranty which is the only one backed and sold by GM.  Others you may or may not get full reimbursement, etc.  Plus, your dealer should have this in their system so any claims are seamless.  Google "James Black GM extended warranty" and you'll see it is the go to on various forums and on FB forums.

 

James Black Cadillac of Ebensburg PA | GM Extended (gmoutlet.com)

Posted
2 hours ago, cltsig said:

Only get the GMEPP warranty which is the only one backed and sold by GM.  Others you may or may not get full reimbursement, etc.  Plus, your dealer should have this in their system so any claims are seamless.  Google "James Black GM extended warranty" and you'll see it is the go to on various forums and on FB forums.

 

James Black Cadillac of Ebensburg PA | GM Extended (gmoutlet.com)

+1

 

I never purchased with James Black, but I did price with them and they were initially much cheaper than my purchasing dealer.  I took the price to the local dealer and they matched.  But I've never read anything but positives on James Black.  I would suggest sticking with the GM Warranty.  Too many third companies are known for their shady buisiness practices.  You can buy as long as your vehicle is under the original 3/36 warranty, but I believe it is less expensive if you buy at lower mileages.

Posted

My dealer sold me an extended warranty AFTER I was past the mileage. Just used it to have leaking oil coolant lines replaced. 

Posted

I agree with CITSIG on the GMEPP warranty only. There are lots of discussion on the Corvette forum and Tahoe forum about the GM warranty and several Dealers that sell at a discounted price. Get the best price from one of those Dealers and see if your Dealer will match the price or just purchase from the Dealer with the best price. State of Florida and North Carolina set their own prices on warranties and they will not discount. Too many electronics on these new vehicles to not have a warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Anyone have any info about backorder time? It's classic 4th of July hot here in ohio.
    • There would be one way of determining the quality of the factory oil although probably more than a typical oil lab test, and that would be to draw out some oil from a new truck and send a sample to a lab that could do a more elaborate test of the oil. The issue with too little oil in the diff may not be the lack of lubrication of the diff bearings and gears themselves ( although a lack of oil volume for cooling ) but the wheel bearings because at some point the oil would be too low to properly get onto the spinning axle or fed along the axle tube. That was the claim by the local dealer from a couple of trucks in recent years that had the wheel bearings fail and they figured from lack of sufficient oil due to a severe underfilled diff and some of the bearing material made its way to the diff and it got damaged as well so the axle housings were just replaced on warranty. But your right that if the diff is over filled by whatever margin that it causes more churning of the oil than is desirable and that is no good either and can cause a pinion seal to leak. Also old oil I believe can tend to loose some of its properties like antifoaming and another good reason to change the diff oil every so often. 
    • I would be surprised if the diff's were not filled (with the cheapest gear lube) at the axle factory before being shipped to GM.  If you ever watched them building trucks they install the axles and all suspension parts with the frame upside down and then turn it over before its time to install the engine.     Too much gear lube in a axle can be worse than not enough especially with a lower quality GL where is get whipped up with entrained air (foam)  weakening its ability to lubricate.        
    • This is the 6.6 gasser section of the forum, you should either delete or modify your previous post as it is misleading for anyone looking for factual information on their 6.6 gas engine.
    • Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...