Jump to content

Recommended Posts

Posted

After hearing about the recall involving the GMC Terrain for their headlights being too bright made me think of the topic on this forum about GMC Sierra owners being told their headlights are too bright or flashed by oncoming drivers for bright lights while having their low beams on. Hopefully it doesn't come to a recall for our trucks.

Posted

I wouldn't be a bit surprised if there was a recall for the trucks. I can't tell you how many times I've been "flashed" at night. Considering we sit close to the same height as a Yukon. 

Posted (edited)
2 hours ago, L87Powered said:

After hearing about the recall involving the GMC Terrain for their headlights being too bright made me think of the topic on this forum about GMC Sierra owners being told their headlights are too bright or flashed by oncoming drivers for bright lights while having their low beams on. Hopefully it doesn't come to a recall for our trucks.

The biggest problem with the Silverado/Sierra isn't the headlights.  Owners put leveling kits, raise the front or drop the rear to level and that throws the aim off. An inch or 2 makes a huge difference in the light plane down the road. It's all about aim and adjust which most don't do after leveling.  2 guys I work with leveled and didn't adjust their lights.  They were getting flashed; I adjusted them and "voila". No more being flashed.

Edited by mafd2
  • Like 1
  • Thanks 1
Posted

What trucks are you driving? My RST headlights leave a lot to be desired.

 

I drive at night a lot, I’ve never been flashed 

  • Haha 1
Posted

Presumably its ones that are poorly aimed due to lift/level or loading.

Presumably we don't yet have enough info about how the refreshed ones perform

 

Lights used before the refresh:

1500 Sierra

 Headlamps, LED reflector with incandescent turn signals and LED signature Daytime Running Lamps    S       S       S       S       --       --       --   
 Headlamps, LED reflector (high intensity) with LED turn signals and LED signature Daytime Running Lamps    --       --       --       --       S       S       S   

 

1500 Silverado

Headlamps, halogen reflector with halogen Daytime Running Lamps    S       S       S       --       --       --       --       --       --   

 

Headlamps, LED reflector with LED signature Daytime Running Lamps    --       --       --       S       S       S              S       --   

 

Headlamps, LED reflector (high intensity) with LED signature curtain Daytime Running Lamps
1 -  Included and only available with (WGQ) Redline Edition. 
2 -  Included and only available with (WJP) Midnight Edition.     --       --       --       --       --       A1    A2    --       S   

 

'dashes' and 'S's' indicate not available or standard on different trims

A1, A2 refer to available on a trim, with the condition listed in the notes

Posted (edited)

I get flashed all the time with the Denali. Stock truck not leveled and not towing. I don't think they are overly bright either. Both rows of lights illuminate and I think oncoming drivers see the four lights and automatically think I forgot to dim. With the fogs on, it's worse .

Edited by smit303

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...