Jump to content

Recommended Posts

Posted

I can get all the way up to 22 in my high country (22" wheels)  but it's only back roads around 45mph. The second i get on the highway it drops down to about 15 mpg at 80mph. How about you? 

BCB8871B-36AA-477B-B100-D5767CA66953.jpeg

Posted

Best I've gotten was 20.8 on 2 lane road with the cruise set to 63mph with the AC on. I did a trip out to Iowa and got 17.4 on the way back. I'm not sure if that was due to the straight gas vs the ethanol blend. Normally I'm 15.x MPG driving around locally mix of 2 lane and highway.

Posted (edited)

My sweet spot is 67 mph!  If I keep it there my computer reads at 23.1 mpg.  If I kick it to 70 it drops to 19.8 mpgs.  If I do 80 on interstate 29 going to my lake house I drop to 17.4 mpgs.   This truck drives awesome, rides better, has more room, shifts beautifully, and is quicker than my 2018 Sierra SLT with 6.2L/8spd.  But that truck averaged 24 mpgs all day running 70 mph and 20 mpgs running up interstate at 80 mph.  My father always said I should be kicking myself in the @$$ because he couldn’t believe how well it got for fuel economy. 

Edited by TNTSilverado
Posted

My 2020 LTZ crew cab Z-71 6.2 averaged 22.2 mpg yesterday on a 220 mile round trip to my summer camp. I was doing 80 on the highway for 2/3 of the way. Then the rural roads I was either going 35 or 55 with some hills here and there the rest of the way. I average 15 or 16 in city driving. I also averaged a head scratching 26.4 mpg on a 200 mile highway round trip one night when I was bored and I wanted to see what this behemoth of a vehicle could get for fuel economy if I drove it like my Corolla. That night last summer I set the cruise to 60 and with no ac turned on off I went. Btw. The Silverados computer is pretty accurate with the mpg estimate. It’s only off by 2 or 3 tenths when I hand calculate the mpg when I fill up. 

Posted
On 6/7/2022 at 10:38 PM, TNTSilverado said:

My sweet spot is 67 mph!  If I keep it there my computer reads at 23.1 mpg.  If I kick it to 70 it drops to 19.8 mpgs.  If I do 80 on interstate 29 going to my lake house I drop to 17.4 mpgs.   This truck drives awesome, rides better, has more room, shifts beautifully, and is quicker than my 2018 Sierra SLT with 6.2L/8spd.  But that truck averaged 24 mpgs all day running 70 mph and 20 mpgs running up interstate at 80 mph.  My father always said I should be kicking myself in the @$$ because he couldn’t believe how well it got for fuel economy. 

Sweet deal! I'll give 67 a try and see what mine says. There's no doubt the T1 is crazy comfortable, especially with the adaptive ride suspension. But with it being so smooth and comfortable i don't really care how fast I'm going on the Highway, so low and slow is fine with me lol

Posted
21 hours ago, Chevyguy273 said:

My 2020 LTZ crew cab Z-71 6.2 averaged 22.2 mpg yesterday on a 220 mile round trip to my summer camp. I was doing 80 on the highway for 2/3 of the way. Then the rural roads I was either going 35 or 55 with some hills here and there the rest of the way. I average 15 or 16 in city driving. I also averaged a head scratching 26.4 mpg on a 200 mile highway round trip one night when I was bored and I wanted to see what this behemoth of a vehicle could get for fuel economy if I drove it like my Corolla. That night last summer I set the cruise to 60 and with no ac turned on off I went. Btw. The Silverados computer is pretty accurate with the mpg estimate. It’s only off by 2 or 3 tenths when I hand calculate the mpg when I fill up. 

Wow that's amazing with the Z71 package too so you're slightly lifted. Normally i don't care at all about fuel economy but right now i certainly do haha. 
 

do you all run 93 octane too? It says it's recommended to run "premium" fuel on the fuel door. I wonder how many actually do. I run it in just about everything built after 2011 due to high compression

Posted (edited)

I drive in L9 and sport mode. Z71 package with 3.23 gears 

South Florida fwiw so flat roads and low DA. 

 

Highway at 78-80 I get 18-20 mpg depending on wind. 

 

My commute is 25 miles highway 3 miles city during the week. 

My overall average is 17.X MPG(trip 2 is lifetime). I take off aggressively in city driving. 

 

One tank I had 50/50 city/highway and it was 16.2 mpg-with me once again taking off quickly and having a boral exhaust installed. 

 

Only run 93. 99% sure when I bought the truck the dealer put in 87. Definitely felt like the truck was pulling timing/down on power. 

Once I got 2 half tank fillups it was back to feeling quick for a truck. 

 

 

Edited by John813
Posted

Peeps will soon care less about "fuel economy" and more about compensation. So many excellent paying jobs available it's just silly to even bother to think about it. 

Posted (edited)
On 6/7/2022 at 10:38 PM, TNTSilverado said:

My sweet spot is 67 mph!  If I keep it there my computer reads at 23.1 mpg.  If I kick it to 70 it drops to 19.8 mpgs.  If I do 80 on interstate 29 going to my lake house I drop to 17.4 mpgs.   This truck drives awesome, rides better, has more room, shifts beautifully, and is quicker than my 2018 Sierra SLT with 6.2L/8spd.  But that truck averaged 24 mpgs all day running 70 mph and 20 mpgs running up interstate at 80 mph.  My father always said I should be kicking myself in the @$$ because he couldn’t believe how well it got for fuel economy. 

 

Were you just going off the DIC calculation or hand calculating. I will say in my 17 Silverado, the computer was very generous on the display by about 2 mpgs after each fill up. My lifetime mpg on that truck (i record every single fill up) after 30k miles was:

Min: 13.180 mpg

Ave: 16.899 mpg

Max: 24.845 mpg (going east down the colorado plateau from the grand canyon)

 

Would be more interested to see people include their normal driving elevation since that will have a huge impact on your mileages.

Edited by jaxcam02
Posted
4 minutes ago, It's Tim said:

Peeps will soon care less about "fuel economy" and more about compensation. So many excellent paying jobs available it's just silly to even bother to think about it. 

You must be an economics major. First jobs to go will be entertainment jobs, restaurant jobs, anything people can cut to pay for gas and groceries. The job market will shrink with more people than jobs. Some people will go back to school and come after your high paying job. With more people in the market for your job it won’t be so high paying anymore. Retired people will just stay home and the industry that caters to them will dry up. Let’s just drill for more oil, ok?

  • Like 3
Posted (edited)
2 hours ago, jaxcam02 said:

 

Were you just going off the DIC calculation or hand calculating. I will say in my 17 Silverado, the computer was very generous on the display by about 2 mpgs after each fill up. My lifetime mpg on that truck (i record every single fill up) after 30k miles was:

Min: 13.180 mpg

Ave: 16.899 mpg

Max: 24.845 mpg (going east down the colorado plateau from the grand canyon)

 

Would be more interested to see people include their normal driving elevation since that will have a huge impact on your mileages.

Both. That truck just got excellent mileage. 3 years ago we had the Missouri River flood and my normal route to Interstate 29 was cut off. So I just took a 60 mph scenic route to the lake house. The truck registered 28.6 mpgs.  I loved everything about the K2 truck except the HORRIBLE 8 speed transmission and smaller rear back seat legroom with no air vents. Everything else was perfect.  Yes it rode different than T1s but it still was very acceptable and quiet. 

Edited by TNTSilverado
Posted
5 hours ago, KARNUT said:

 Let’s just drill for more oil, ok?

Never happen... "they" that shut it off, fully intend to keep it off. 😉

  • Sad 1
Posted

My 21 Denali with 22" wheels is getting 24.8 for my best 31 miles averaging 72 mph using cruise. I've put about 1,000 on the truck since getting it 3 weeks ago (few 200 mile trips lately). My normal commute it 9 miles one way, 36 a day with lunch I had been seeing 16.5 on those trips. Overall I'm showing 18.5 a cross my 1000 miles. I'm expecting that to settle in around 17 with my "normal" driving. I'm really surprised at how well this truck does on fuel economy. I normally run 88 octane (seems to be an MN thing). 

Posted

FWIW last fillup my truck showed 17.9 MPG on trip 1 and I filled up ~18.5 gallons. 327 miles. ~17.68 hand calc mpg. 

 

Close enough for me. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Progress... sort of.   Intake is disassembled, spider is out, fuel lines removed. Used a torch on the stripped screw with the lower intake off, much easier when I've got the intake sitting on my workbench, I made it talk. Walked right out with a pair of vice grips once it was nice and toasty hot.   New parts are piling up on my service cart waiting to be installed. Distributor, temperature sensor, new gaskets, fuel line kit, themostat, water neck.   My new pickle is I don't want to spend $600 on a replacement spider. I'm not sure IT is bad. I'm probably splitting hairs. Or it's $300 to send mine away and another 3 weeks of the truck just sitting. I have half a mind to assemble everything with the old spider to see if I can get away with just replacing the fuel pressure regulator to be safe. The obvious issue was the gushing high pressure fuel line which will be replaced. Getting to the spider really isn't that hard, and now I know what I'm doing , swapping it would be a breeze should it absolutely need one. Stupid, or smart?   The part that gives me pause is replacing the distributor. Well, it's already out. And I didn't mark it, whoopsie! Engine was at TDC when I removed it, I know that, so upon correct reinstall the metal tip on the rotor should point to the TDC mark on the distributor because that's where it was pointing on the old distributor. Worst case I'm a tooth off and have to re-stab it.   But then, what? I assume the truck will start. It doesn't appear the timing can be set. Here's the problem: These distributors can't be rotated but a degree or two, by design. What I read is Cam ****** needs to be -2 to +2 degrees, ideally at 0 (and checked/set above 1000 rpm). There should be enough wiggle to get that properly set, but checking the reported value is another potential issue. My Actron 9185 scanner says it supports enhanced GM PIDs and Cam ****** is one of them but it's unclear that I'll be able to correctly see it over OBD 1.5. I can see why people end up junking these things with life left in them. They're an absolute nightmare with tweener-year diagnostics/electronics and unobtanium parts.   Fingers crossed it starts and idles nicely. There can be hope, right? I'ma buy a lottery ticket the same day just in case.   Next steps..DO IT. I have not installed an intake before so I've been reading and watching a lot. Some say NO RTV except on china walls, some say DO RTV on water ports but not fuel/air intake. 1/4 or 3/8 bead on China walls? I think my strategy will be, obviously, RTV china walls with overlap on the gasket corners. Chapstick-style RTV the water ports. Leave intake ports dry. The only set of intake gaskets I could find locally are Edelbrock performance gaskets (uh...for an asthmatic 190hp V6? LOL) so we'll see how they do.   #NoToolLeftBehind. It took an hour, but my recovery mission for my deep 10mm socket was successful. It had rolled down the bellhousing and wedged itself between what I think are the fuel lines? I couldn't see it at all, but with a junk antenna I had laying around, I blindly went poking/sweeping for it, heard it clink, raised the truck, and caught a sliver glimpse of chrome with a flashlight way up there in Narnia. I had pushed it farther along the lines holding it captive, but within access of severely improvised tools, poking and cursing at it to finally knock it free to where I could get a fingertip on it to bring it home.    Not much to see.      
    • Thats crazy considering im right next door (Indiana)
    • For a limited time, retail and commercial accounts receive an AMSOIL Vinyl Tool Tray with their order of $500 or more when they use code TRAY726 at checkout. The promotion runs through July 21, 2026.   Order at https://syntheticadvantage.com   Want to use AMSOIL in your business or sell at your store, apply here.  https://www.amsoil.com/business-opportunities/?zo=521390  
    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...