Jump to content

Recommended Posts

Posted
On 12/7/2022 at 9:01 AM, Scooby1974 said:

The idiot is the one doing 65 on a 75 holding back two semies , a minivan and a SUV on a two lane country road.

You must be the Idiot who does this same crap!!!

Give me your address so I can send you $5 so you can get a pair!!!

 

 

I lived in Texas a decade. I've traveled your roads. 

 

Talladega's back straight is 4,000 feet long. A car traveling 200 mph is coving that distance at 293.3333 feet per second taking 13.64 seconds to do so. A car passing him at 205 mph covers that distance in 13.33 seconds covering 88.88 more feet in the straight than the car being passed or four car lengths. Fact is that pass can and is made with a speed difference of 3 mph. 

 

You have a guy doing 65 and you need 105 mph or a 40-mph difference to feel SAFE making that pass? 98 isn't enough?

 

Anyone trying to pass two semis a minivan and an SUV in a single pass.... tell ya what. You've got bigger problems than your speed limiter. And balls won't fix this....  :idiot:Try something under your hat....

 

 

  • Like 4
Posted

I don’t mind doing 60-65 behind a semi in a 75. 50-55 I’m going where it’s safe. I’m going on 67 and driven over 2 million miles so I’m not just lucky. I drove a million pulling a fifth wheel with 3/4-1 tons trucks registered for 25K. No accidents I ticket. I driven 36 hours from Texas to NJ when I was under 40 a few times. Most of my rides were modified. When I pass you usually can see my toes wiggling pass the fire wall on two lane roads. I ain’t waiting I’m going. Some of my rides would break the tires down shifting at 60 going around you. My pipes would alert you if you were napping. It’s that’s too much pull over or do the speed limit. I have patience for semi and blue hairs. Every one else not much. Going slow doesn’t make a person noble. You just a dead at 55 as 70. Put down the phone and pay attention. 

  • Like 1
Posted
On 12/7/2022 at 10:59 AM, richard wysong said:

Death wish doing 100 on any road, things happen faster than you can react... not so easy with the nitwits on the road these days...

Other places manage seem to be able to handle it, Germany.

Posted (edited)

On limited access super high ways not 2 lane country roads where farmers can pull out with a combine. I have never been to west Texas but that would be something I would have in the back of my mind passing a line of cars at 100+mph

Edited by richard wysong
Posted
33 minutes ago, richard wysong said:

On limited access super high ways not 2 lane country roads where farmers can pull out with a combine. I have never been to west Texas but that would be something I would have in the back of my mind passing a line of cars at 100+mph

I’ve roaded my clearing equipment all over Texas and Oklahoma. You sit very high and go very slowly in comparison. You see things coming at you far away and you pull over. I don’t think many people pass a line of cars at a time. I wouldn’t do it. You’re what if machine could go until the end of time. What would happen if a plane was having trouble and needed to land. They started dumping fuel. It happens to hit your outside fire pit that you’re sitting by and enjoying. Next thing you know you’re running around on fire from the flaming spray. What if. 

Posted

I understand that and the reason to pass whatever as fast as possible and get back in the lane. Just  as Grumpy stated  that speed seems excessive but I'm not in Texas so gonna leave it alone. What was the question?😆

  • Haha 1
Posted

Scooby, I like your style but have to disagree about the speed. Doing 100+ mph on the freeway is dangerous because of the crazy drivers, even if you can see way out in front and to the sides, but doing that on a country road invites big trouble from the stray deer, dog, or farm animal. You may not be the problem but you aren't alone out there. BTW, you are one of the few that understands that pickups are really limited in speed by the driveshaft although, your government does control your top speed for the tires you have too.

  • Like 1
Posted
8 minutes ago, Rad64 said:

Scooby, I like your style but have to disagree about the speed. Doing 100+ mph on the freeway is dangerous because of the crazy drivers, even if you can see way out in front and to the sides, but doing that on a country road invites big trouble from the stray deer, dog, or farm animal. You may not be the problem but you aren't alone out there. BTW, you are one of the few that understands that pickups are really limited in speed by the driveshaft although, your government does control your top speed for the tires you have too.

 

I understand everyone's concern about driving at that high speed....

I am a safe driver with a Skill to drive... It's not how fast you go but how you control your speed...

At 22 years old i got a job that required me to drive from 6 hrs up to 19. Today at the age of 48 i have a lot of drive time.... Have seen a lot and have been lucky from accidents but i never do anything that i am not Sure i can do... So if i need to floor it to keep moving , it will get done.

Its a skill!!

I drive 4 mph over a speed limit but i am not following a convoy at 50 for 30 minutes.

Just saying!!!

 

Posted
On 12/8/2022 at 11:33 AM, Grumpy Bear said:

 

I lived in Texas a decade. I've traveled your roads. 

 

Talladega's back straight is 4,000 feet long. A car traveling 200 mph is coving that distance at 293.3333 feet per second taking 13.64 seconds to do so. A car passing him at 205 mph covers that distance in 13.33 seconds covering 88.88 more feet in the straight than the car being passed or four car lengths. Fact is that pass can and is made with a speed difference of 3 mph. 

 

You have a guy doing 65 and you need 105 mph or a 40-mph difference to feel SAFE making that pass? 98 isn't enough?

 

Anyone trying to pass two semis a minivan and an SUV in a single pass.... tell ya what. You've got bigger problems than your speed limiter. And balls won't fix this....  :idiot:Try something under your hat....

 

If you were to be by the road and i carry your butt to the hospital you would not think how fast or slow your traveling...

I am Very well capeable of flying a jet!!

 

 

 

Posted
On 12/8/2022 at 7:17 PM, KARNUT said:

I’ve roaded my clearing equipment all over Texas and Oklahoma. You sit very high and go very slowly in comparison. You see things coming at you far away and you pull over. I don’t think many people pass a line of cars at a time. I wouldn’t do it. You’re what if machine could go until the end of time. What would happen if a plane was having trouble and needed to land. They started dumping fuel. It happens to hit your outside fire pit that you’re sitting by and enjoying. Next thing you know you’re running around on fire from the flaming spray. What if. 

What if??

If i think how you do, i would stay home in a fetal position and starve 

  • Haha 1
Posted
1 hour ago, Scooby1974 said:

What if??

If i think how you do, i would stay home in a fetal position and starve 

Yea probably. 

  • 11 months later...
Posted

Hey all, I just installed the Pulsar LT in my 2020 GMC Sierra 1500 SLT with the 5.3 and you can adjust the speed limiter to 140 MPH. Its only supposed to be used on closed courses...

  • Like 1
  • 3 weeks later...
  • 2 weeks later...
Posted
On 12/7/2022 at 4:18 PM, Amcguy1970 said:

 

I live in Texas, point me to these two lane back roads that is anywhere remotely better than a highway that is not under construction (construction zones don't count).

 

So, you couldn't wait four miles to pass? We have plenty of animals to hit as well as rogue live stock that may get out, I see that many of times. 

 

Your truck has always been 98mph, nothing has changed. Probably best honestly.

 

Tyler

I know of several in the N.Tx area.  FM730 running from Weatherford to Azle comes to my immediate mind. Hell even 1810 running through Decatur and Chico. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have a 2024 Chevy Silverado 2500 with the 6.2 liter engine, Vin: 2GC4YME79R1273849, with 27,437 miles. Recently we took a trip from Candor, NY to Townsend, TN pulling our fifth wheel, when I got close to the Townsend, TN area The truck gave me a message of low oil. I checked the dip stick and found it was 2 quarts low. Today, August 27, 2026, I had the oil changed and the technician Found the truck was very low on oil.  Is there a Recall for this? What is my recourse for this issue? Do I call the dealer where I bought it or any chevy dealer?   Robert Strickland 292 Owego Road Candor, NY 13743 352-502-6588 [email protected]
    • We understand the importance of understanding how your Sierra performs, @SoCal Angler. Our team would like to gather the proper details to assist you with your inquiry about your truck's automatic braking. When you have a moment, please visit: https://s.chevy.com/support-request and fill out the request form with pertinent details. This will ensure your request is routed correctly so we may take a further look. We will keep an eye out for your outreach.
    • That is the funnel kit I bought and for being here in Canada I did get a better deal than what other sources were charging through a certain supplier in town that sources more directly and they ordered it for me. There are other items now on the market which would be perfect as well but this has worked well which was the hope when I bought it. I mentioned the Amsoil quart bottles as they have that squarish shape up top and it props nicely on the rim of the opening without falling into the funnel so I can leave them sit and drip a bit. You may have already figured out that to get the cap off the valve cover unless one is 7 + feet tall its not going to be reached without standing on a step of some sort and so when I do that I put the right adapter in and just leave the elbow on the funnel all the time anyway and open the lid and then if using quart containers for sure I can stand beside the truck and leisurely add the oil, and I can leave that funnel on when starting the engine to let it idle to fill the filter and then add the rest of the oil to top it up before removing the funnel and putting the factory cap back on. I put the cap back on the top and slide the bottom cap on as it fits onto the elbow adapter also and then store the funnel in a clean household plastic garbage bag along with the adapter so I have no reason to be washing out the inside of the funnel as I keep it completely clean between uses.    Draining the oil as per the under the truck portion, yes indeed that is slick as someone was thinking on GM's part there and admittedly I don't drop the oil screaming hot in this truck due to the exhaust being there and makes it safer as far as the oil temp if its just warmed up some instead as I don't have the truck on any ramps etc as I do it as the tires sit on the garage floor. The filter is not boiling hot then either and can drop it off into another pail after pulling the drain plug and just leave it drip out. Go back under a few hours later with new filter in hand and clean off the filter base and put the new filter on and install the drain plug. The filter is a little cramped in there as per wrapping ones hand around the filter and I am so used to using the band style filter removal tool that its no big deal and same for snugging it up. My filter wrench is many years old now but I think this is the current version and sounds like the right size, just in case my explanation was not great ( those nylon strap wrenches that one tool fits all filters are not my favorite tool to use, I much prefer this style personally )     57020 Swivel Gripper - No Slip Filter Wrench - Small | Lisle Corporation   And again about the oil draining and filter setup under these GM trucks, I've watched Ford videos of them struggling with oil flying sideways out of the oil pan on the gas 7.3 due to the sideways drain plug onto other components or cross members and guys trying to make shields out of carboard etc and other Ford pickups that Ford insisted they have sideways drain plugs. One win for GM there anyway with this engine. 
    • Kind of off topic, wife drives a 2023 Yukon Denali with the 3.0, been a great rig so far, incredible fuel economy for a truck that big and heavy. Coming up on 50000 trouble free miles.
    • I`m gonna try some of this in my 2000 LM7 that has had the famous piston slap since 17,000 miles or so. I have used Mopar combustion chamber cleaner down the spark plug holes a few times in the past. Corrects the problem for a few months or so. Then returns. GM top engine cleaner has been used also. No good results from this.   This LM7 never used oil. Even running the piss out of it.   Course, I`m gonna use this in my 2025 L84 while it`s still clean. It`s got 13,000 miles. Used Chevron fuel system cleaner [2 bottles in tank] a tank or 2 ago.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...