Jump to content

Window Tinting

BigMick2023
 Share

Recommended Posts

BigMick2023 Enthusiast

BigMick2023

Posted
Posted (edited)

What are you guys doing for window tinting?.......leaving as-is from factory or going aftermarket to make it darker?

My 2023 Silverado High Country has 20% in the side-rear and 70% in the side-front.

Below are pictures of my truck (Red) along with another High Country that had the side-front done to match rears.....I like the look for sure. 

 

I'm seriously considering going 20% side-front to match the rear and make it more comfortable. 

Also, talked to a local installer and his suggestion is to go with the IRX Ceramic heat-rejection tint for all sides and back since my truck sits outside. 

Minnesota is max 50% on side-front.....  🤫

 

Any input or recommendations appreciated.......

 

 

IMG_9871.jpeg

IMG_9872.jpeg

Edited by BigMick2023
1454 Enthusiast

1454

Posted
Posted

I have 35 and 20 on the front and rear, respectively. NC inspections measure tint on the front, otherwise I would have went to 20 all around. My previous car was 27.5 front and 20 rear. It just made it a headache come inspection time to get it to "pass". My advice, go with legal if you have to deal with inspections. I don't regret having darker tint previously, I just hated dealing with the inspection piece. Not sure if that helps with your decision. 

BigMick2023 Enthusiast

BigMick2023

Posted
  • Author
Posted
1 hour ago, 1454 said:

I have 35 and 20 on the front and rear, respectively. NC inspections measure tint on the front, otherwise I would have went to 20 all around. My previous car was 27.5 front and 20 rear. It just made it a headache come inspection time to get it to "pass". My advice, go with legal if you have to deal with inspections. I don't regret having darker tint previously, I just hated dealing with the inspection piece. Not sure if that helps with your decision. 

 

 

Thanks for your input.....

No inspections in Minnesota, so that's not an issue. Just if I got pulled over for something and they wanted to be a butt-head about it. 

I asked the installer and he said there are very few issues going darker as long as you aren't a jerk with the cops or drive like an idiot.....sports cars are more vulnerable, trucks not so much. 

 

Thanks....

  • Thanks 1
Silverado4x4 Senior Enthusiast

Silverado4x4

Posted
Posted
2 hours ago, BigMick2023 said:

 

 

Thanks for your input.....

No inspections in Minnesota, so that's not an issue. Just if I got pulled over for something and they wanted to be a butt-head about it. 

I asked the installer and he said there are very few issues going darker as long as you aren't a jerk with the cops or drive like an idiot.....sports cars are more vulnerable, trucks not so much. 

 

Thanks....

Butthead or not put yourself in a police officers shoes, you do a traffic stop with a vehicle that has dark illegal tint worse at night now you proceed to the vehicle and what runs through your mind is do they have a weapon pointed at me? Even though the spot is aimed at the driver side door mirror to luminate the inside of the stopped vehicle it doesn't help much with dark tint now on vehicles that are tinted behind the drivers front seat area the spot will light up the inside of the vehicle. So the best thing to do is put the driver side door window down and have both hands on top the steering wheel.

  • Like 2
Jus Cruisin Enthusiast

Jus Cruisin

Posted
Posted

I have a close match to the rear and a limo tint brow. I've had side tint and brows all the time I was in Florida (30 years). Can't stand to be without it now. I would limo tint the rear until this truck. Now with the camera rearview mirror it isn't necessary. 20230512_055025.thumb.jpg.5fa4e4d8ce36bac32cc3ed33777a2952.jpg

  • Like 1
BigMick2023 Enthusiast

BigMick2023

Posted
  • Author
Posted
12 hours ago, Silverado4x4 said:

Butthead or not put yourself in a police officers shoes, you do a traffic stop with a vehicle that has dark illegal tint worse at night now you proceed to the vehicle and what runs through your mind is do they have a weapon pointed at me? Even though the spot is aimed at the driver side door mirror to luminate the inside of the stopped vehicle it doesn't help much with dark tint now on vehicles that are tinted behind the drivers front seat area the spot will light up the inside of the vehicle. So the best thing to do is put the driver side door window down and have both hands on top the steering wheel.

 

 

I don't want this thread to turn into a legality debate.....we're all adults here and can make that decision for ourselves. 

 

Just inquiring what you guys have done for window tint and what works well for both blocking UV and heat rejection. 

bdallas Enthusiast

bdallas

Posted
Posted

Whatever you do, go with the ceramic tint... Makes a big difference with the heat radiating through the windows. Yes, the inside of the truck still gets hot when baking out in the sun all day.

I put a ceramic tint on my windshield a there is a noticeable difference that you can feel from the heat coming through the side windows vs the windshield.

The dealer had put a tint on the side windows, so at the time I didn't add ceramic to the sides... but I will be going back to add ceramic all the way around.

 

 

  • Like 1
BigMick2023 Enthusiast

BigMick2023

Posted
  • Author
Posted (edited)
5 hours ago, bdallas said:

Whatever you do, go with the ceramic tint... Makes a big difference with the heat radiating through the windows. Yes, the inside of the truck still gets hot when baking out in the sun all day.

I put a ceramic tint on my windshield a there is a noticeable difference that you can feel from the heat coming through the side windows vs the windshield.

The dealer had put a tint on the side windows, so at the time I didn't add ceramic to the sides... but I will be going back to add ceramic all the way around.

 

 

Good to know.....they have so many types now it's tough to figure it out. 

These are the two types of ceramic Im considering....

CTX Ceramic Tint

Restyle your vehicle and make it more comfortable with LLumar® CTX® ceramic window tint. This durable window tint comes in multiple color-stable charcoal shades that range from limo-dark to a subtle gray hint. Because it’s metal-free, there’s no mirror-like, reflective look with CTX.
CTX ceramic tint is an excellent performer when it comes to rejecting heat and is loaded with other benefits too. It shields you from 99% of harmful UV rays, cuts irritating glare, and helps protect against injuries from shattered glass – all while helping you feel cooler. This makes LLumar CTX a smart choice when you want top quality window tint but not the top-of-the-line price. You’ll feel the difference when you choose CTX or any of our other ceramic tint products. They’re all made with powerful, road-tested nano-ceramic technology that’s able to help block heat even in the lightest shades. Our infrared-rejecting IRX tint and clear AIR film are also excellent choices when it comes to harnessing the power of nano-ceramic technology.

 

 

IRX Ceramic Tint

IRX Heat-Rejecting Window Tint LLumar® IRX™ heat-rejecting window tint transforms your vehicle inside and out. It features advanced nano-ceramic construction that specifically targets infrared rays. This is what gives LLumar IRX tint its name and its cooling power. IRX is also loaded with additional premium features:

  • Easy electronic connectivity
  • Protection against more than 99% of UV rays
  • Discreet privacy
  • Glare reduction

IRX comes in a wide range of shades. It can change the look of your car or blend seamlessly with your factory tinted windows. Either way, IRX’s premium composition can block a significant amount of heat. So, you can pick your perfect shade, without compromising on comfort.
All tinted windows block some heat, but advanced, infrared heat-rejecting ceramic tint can block the most. LLumar IRX is no exception. It’s the next step up from CTX.

Edited by BigMick2023
Wiggums Senior Enthusiast

Wiggums

Posted
Posted

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

  • Like 1
  • Haha 1
Grumpy Bear Senior Enthusiast

Grumpy Bear

Posted
Posted
9 hours ago, Wiggums said:

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

 

This ^^^^^

BB68 Enthusiast

BB68

Posted
Posted
19 hours ago, Wiggums said:

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

3M is the only way to go. I still see our 2001 Impala driving around and the tint is still black like its was brand new

 

 

 

  • 2 weeks later...
BigMick2023 Enthusiast

BigMick2023

Posted
  • Author
Posted

Following up to my original post, had the window tint installed today @ Black Diamond here in Minnesota. 

I went with the IRX ceramic tint on front side windows, rear side windows, and rear window with slider. 

 

Front Sides:  25%

Rear Sides:  40%

Rear windows and slider:  5%

This is over the top of the factory tint of 70/20. 

 

I love the look and should be great with reducing interior heat and sun damage. 

The tinting flows nicely from front to back, rather than stock that just looks weird IMHO. 

 

B4BA9AB3-1971-4D31-91EF-E809501DC0ED_1_105_c.thumb.jpeg.f178aa29141c0d2c817c5a9ee97ef03b.jpeg

 

F3C46F51-BAE7-44CF-8A5F-D038701BC783_1_105_c.thumb.jpeg.6697e09f03360f3327d47428361e8e2a.jpeg

 

  • Like 2
TxTruckMan Senior Enthusiast

TxTruckMan

Posted
Posted

Looks great! I also went with ceramic all the way around including the front windshield and the results are amazing. A must have for here in Texas. 

  • Like 1
Wiggums Senior Enthusiast

Wiggums

Posted
Posted
1 hour ago, dieselfan1 said:

How is it at night?

 

Not bad at all! My front windshield is also tinted. I see a lot of people around here doing the same, sure, it's illegal, but have never seen people cited for that.

 

From the outside, it looks really dark, but if you're inside, you can still see everything. It's like sunglasses. People can't see your eyes but you can see outside just fine. Same thing.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   1 Member, 0 Anonymous, 2,783 Guests (See full list)

  • Latest Articles

  • Posts

    • B14Sierra
      Cam chain tensioner question

      By B14Sierra · Posted

      So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • dna9656
      No low range 4 x 4

      By dna9656 · Posted

      My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...