Jump to content

Recommended Posts

Posted

What are you supposed to do with all the stuff that you have that plugs into a 12 volt Outlet and GM decides not to put it in their trucks are you kidding me. They do realize this is a truck. They're taking the testosterone over truck and putting in estrogen they better wake up

  • Like 1
Posted
7 hours ago, steve3661 said:

What are you supposed to do with all the stuff that you have that plugs into a 12 volt Outlet and GM decides not to put it in their trucks are you kidding me. They do realize this is a truck. They're taking the testosterone over truck and putting in estrogen they better wake up

 

 

Get with the times.  Everything is USB or OBD powered these days.  12v outlets are dated.  I actually haven't used a 12v outlet in any vehicle in probably 10 years now if not more than that.  

  • Sad 1
Posted

GM puts stuff in that their customers want and use.  Not many people use those cigarette light ports anymore.

I only use a usb charger plug in the ports on my '04.  My parents only used it in their Caddy to power a fm transmitter to play stuff from their ipod on long trips.

 

And if you really need it, put one in.  It's not particularly hard to do.

Posted

They stopped putting them in with the 22 refreshed model. I connect my air compressor directly to the battery. A little bit of a pain.

Posted
On 2/14/2026 at 9:57 AM, steve3661 said:

What are you supposed to do with all the stuff that you have that plugs into a 12 volt Outlet and GM decides not to put it in their trucks are you kidding me. They do realize this is a truck. They're taking the testosterone over truck and putting in estrogen they better wake up

I have 2 or 3 of them in my 2014. I imagine they must of saved a whole 5 bucks per truck de-contenting them with so many other items they have stripped out over the years... It is so easy to see that the people at the top, not only do not drive trucks but seem to have never stepped foot into one with some of the choices they have been making over the last few years.

Posted
3 hours ago, BIGDOGx said:

I have 2 or 3 of them in my 2014. I imagine they must of saved a whole 5 bucks per truck de-contenting them with so many other items they have stripped out over the years... It is so easy to see that the people at the top, not only do not drive trucks but seem to have never stepped foot into one with some of the choices they have been making over the last few years.

They didn't just remove them.  They replaced those ports with ports more people buying new trucks use, and use more often.  USB ports.

Posted
1 hour ago, davester said:

They didn't just remove them.  They replaced those ports with ports more people buying new trucks use, and use more often.  USB ports.

My 2014 has i think 5 or 6 USB inputs, of course not c as those were not invented yet.

 

Really no reason to stop giving a plug option in the cab other than because it saved them prob a few coins per truck made. I know i don't say run a laptop in my truck, but if i was say a contractor i would most likely utilize that plug option daily. Like i said this is the result of having non truck owners deciding design input on how they are made.

Posted

It is WAY WAY WAY more likely that someone at GM actually researched this, and found that the vast majority of new truck customers want usb ports, both up front and in the back for bigger cabs, and few care about and/or won't buy the truck because it doesn't have a cigarette lighter port.

  • 1 month later...
Posted

Good luck trying to pull more than a few amps from the USB ports.  You are wattage limited.  

  • 3 months later...
Posted

My phone (OnePlus) requires a proprietary charger to get the full 80w fast charging benefits. The only option to get these fast charging benefits is a 12v plug. Any other charger and my phone defaults to 25w charging. I also have a tire inflator with a back up 12v plug. USB would never keep that thing going in a pinch. 

Putting just one in the trucks wouldn't hurt. Good laptops still include at least 1 USB-a port. 

Posted

It is possible to add your own 12v outlet to your truck.  Check out this video:

 

I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.  

You can get the GM 12v outlet from Amazon 

https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF

EWAY 12 Volt Power Adapter for GM  

https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?

 

I just haven't figured out a good place to put the 12v outlet in my truck.

 

Some people are getting USB-C to 12V adapters 

https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa?

Not sure if they provide the correct amperage that a device like a tire inflator would need.  

  • 2 weeks later...
Posted
On 2/14/2026 at 2:37 PM, davester said:

GM puts stuff in that their customers want and use.  Not many people use those cigarette light ports anymore.

I only use a usb charger plug in the ports on my '04.  My parents only used it in their Caddy to power a fm transmitter to play stuff from their ipod on long trips.

 

And if you really need it, put one in.  It's not particularly hard to do.


I have a cigarette 'lighter' port on the dash of my Silverado 1500 WT  (4WD, reg cab, short bed).

There are many things that may want 12VDC at higher current without going thru USB-C limits.
(Temp install of ham radio gear is one!)

-Bill

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...