Jump to content

Recommended Posts

Posted

My 2005 next to my 2014. Unfortunately for the 2005 it was a victim of a flying rock from a logging truck last week and now has a crack windshield.

cad93104217c33854ef556b0c064cb65.jpg

75f9725e9ec3ae8b0976e2f9a4161855.jpg

  • Like 1
Posted

I like the looks of these 14/15s but to much electronic bullshit I like my old 94 Silverado just a simple on pickup good on gas well the best a 5.7 TBI can be (22mpg highway) and as simple as can be and very reliable 305 000k. And no real problems.

  • Like 1
Posted

My 2005 next to my 2014. Unfortunately for the 2005 it was a victim of a flying rock from a logging truck last week and now has a crack windshield.

cad93104217c33854ef556b0c064cb65.jpg

75f9725e9ec3ae8b0976e2f9a4161855.jpg

 

Things have changed a little in the last 10 years! :lol:

Posted

You should see the changes the last 24 years look like…

20150417_154041_zpseaglvqid.jpg

Posted

You should see the changes the last 24 years look like…

20150417_154041_zpseaglvqid.jpg

 

I'm wondering what the fuel economy would be like with all the new technology in the older, smaller body.

 

so long

j-ten-ner

Posted

 

I'm wondering what the fuel economy would be like with all the new technology in the older, smaller body.

 

so long

j-ten-ner

That's why we need a 5.3L V8 Colorado or Canyon! ...just sayin'...

  • Like 1
Posted (edited)

They did make a 5.3 a couple years ago. That in red with the z71 and chrome wheels, 4 door... What a beautiful ride

Edited by 02suburbanZ71
Posted

They did make a 5.3 a couple years ago. That in red with the z71 and chrome wheels, 4 door... What a beautiful ride

Oh I know! Someone I know has one....that truck is a beast!

  • Like 1
Posted

 

I'm wondering what the fuel economy would be like with all the new technology in the older, smaller body.

 

so long

j-ten-ner

It would probably be about the same, the 1991 may look smaller but they built it back in the day when they weren't afraid to use metal in the trucks. They weigh close to the same, the 91 is a light duty 3/4 Ton. The 2014 can take more in the bed then the 91 and can pull about 1400lbs more as well…

Posted

Was looking at waxing and cleaning the interior on my truck this week but instead there's snow all around me. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • This is interesting. My quote tagged here is different from my original quote. After I’m driving them longer. That isn’t me. I don’t talk that way. I definitely wouldn’t express myself that way. Interesting.
    • I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...