Jump to content

Recommended Posts

Posted

Washed, waxed, and detailed the truck

 

Sent from my SAMSUNG-SGH-I927 using Tapatalk 2

 

 

Posted
tailgate too heavy for ya :P

 

Nope nervous my 3 yr old is going to drop it on his head as he likes to play with it.

 

 

Ryan

Posted

added the tailgate assist from Dee Zee

 

Don't you have the e-zee lift from the factory on your truck? I thought all the new trucks got them.

Posted (edited)

added the tailgate assist from Dee Zee

 

Don't you have the e-zee lift from the factory on your truck? I thought all the new trucks got them.

 

Yea kinda it doesn't lower slower. It is the lighter tailgate forget what the pkg was

 

 

A60 - LOCKING TAILGATE WITH EZ LIFT Ryan

Edited by RyanbabZ71
Posted

The new trucks have a torsion bar in the tailgate that makes lifting it easier, it does nothing lowering it.

 

 

Put the MIT on the truck today. Sure sounds faster. :lol:

 

 

Sent from my iPhone using Tapatalk

Posted
Let's hear it Mike, I love the sound of power.

 

I doubt a video camera would pick up the sound difference. The sound is much deeper, sort of like flipping the air cleaner lid over on an old carb'd car.

 

 

Sent from my iPhone using Tapatalk

Posted

Went around town to get a few things. Picked up a hitch mounted cargo carrier for the wife's Jeep (road trip in a couple of weeks), fake Christmas tree to replace the one we lost when moved this summer (how do you lose a dang tree??), got a few more lighting accessories for the holiday lights, got oil & filter for wife's Jeep, went to Walmart to get my boy some more pants (lil stinker is growing way too fast), came home, off loaded stuff, loaded up the garbage/recycleables to take to recycle center tomorrow. Gee guess what I'll be doing tomorrow...lol

Posted

I drove the (dare I call it) Vortec Max since the engine is an 06 LQ9 to the poker game. Still hunting for traction.

 

Sent from my DROID RAZR using Xparent Red Tapatalk 2

Posted

I had a little fun with a Roush F150

 

Sent from my DROID RAZR using Xparent Red Tapatalk 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...