Jump to content

Recommended Posts

Posted

So I've got a 2003 GMC Z71 Sierra with 165k on the clock. I loved this truck since I bought it in 2007 but now it starting to show some age and wear and I'm thinking about selling or trading it.

 

So far, I've replaced the started, both hubs, breaks, fludis, plugs and wires of course. I have neglected it and it needs front axle seals, water pump, shocks, knock sensors, evap sol, and I'm sure 4 new o2 sensors couldn't hurt. Oh, not to forget the heated seat element in the driver's seat that I never fixed. Some guy drug his mirrior all the way down the passenger side of the truck one day because his lane ended and he thought merging into the side of my truck was a good idea. Fixed. I've been rear ended twice, its was fixed once. Recently my wife dragged the side of the box down one of those poles that guard a building at the drive threw. A while back while pumping gas I looked at the bottom of the door exterior side down low and found a bubble in the paint. I popped it, full of water ugh.

 

I guess I'm just looking for some thoughts, opinions, or "this is what I would do." I've really gotten interested in diesels lately and I'd love a 4 door 2006 Duramax. They are about 20k. Wonder if I could get 9k for mine.I don't really tow much yet but I hope to someday.

  • Like 1
Posted

You could probably get that much out of it.

 

If I'd been able to find a Dmax for 20k in the shape I wanted I would have jumped on it!

Posted

I do not remember ,but 05-06 disels may have a very bad injector problem running in the 6,000.00 price range. Check out other older forum on the years in this site to be exact on which years the duramax was bad.

just want to save you an expensive repair .

scooby

 

 

Posted

lb7's had the injector problems.lly's had headgasket problems. lb7's are 01-04 lly is 04.5-05 and some 06's are llys but it is a lbz that is detuned

  • Like 1
Posted

I haven't' done much research myself but a friend of mine spent a lot of time gathering info. He ended up with a 2001 dully but favored the 2006 duramax. He said it had the least problems and emissions. I don't know how true that is.

2011-05-26134539.jpg

My kids are getting older and I really want a 4 door. I kinda wanted to hold onto this truck forever but I'm not sure about throwing all the money at it and trying to fix the rust issues that are beginning. I don't even have enough power to light the tires from a stand still...

What are some of the known problems with the GMT800?

Wheel hubs

Rusty rockers

Rusty door seams

steering clunk

water pump

gauge cluster

evap leaks

knock sensors

What am I missing?

Posted

Most of the things you mentioned will happen on a newer truck too, once it gets older. :lol:

 

If you really love your truck, keep it and put money into it.

 

As far as Dmax's go, the 2001 had gasket problems as well. When I was looking for my truck, I saw a 2006 Dmax for $35K. Couldn't believe it.

 

I'm happy with my 2006 half ton though, it's a good truck and a lot of upgrades from the earlier 800's.

Posted

depends if you want a payment or not. i have a 2003 also, id also like to get a newer dmax but i dont owe anything on my truck an havent since i bought it. and even after 125,000 miles it still rides good and is in great shape and i cant enough money for the truck at this point to get rid of it

Posted

I've had this paid off for some time now and I'm not really interested in jumping into another payment but I'm not liking the thought of dumping a bunch of money into it. I like the idea of owning 1 truck for a very long time and racking a lot of miles up on it. I should have rust proofed mine more.

 

another known problem

Castech heads

Posted

I've had this paid off for some time now and I'm not really interested in jumping into another payment but I'm not liking the thought of dumping a bunch of money into it. I like the idea of owning 1 truck for a very long time and racking a lot of miles up on it. I should have rust proofed mine more.

 

another known problem

Castech heads

 

 

castech head are very uncommon

Posted

I love my 01 Z71, i have put that truck through so much hell it's not even funny and it still runs like a champ with 210K miles on it. Sure the horn doesn't work, the hazard button is jammed down and constantly ticking, and the windshield wiper only goes up to speed 3. But i love the truck because it is mechanically sound and has never let me down once.

  • Like 2
Posted

I love my 01 Z71, i have put that truck through so much hell it's not even funny and it still runs like a champ with 210K miles on it. Sure the horn doesn't work, the hazard button is jammed down and constantly ticking, and the windshield wiper only goes up to speed 3. But i love the truck because it is mechanically sound and has never let me down once.

 

 

idk what it is about the 99-02 style trucks. i know they are the same as the 03-07 but they just seem to last longer

  • Like 1
Posted

I love my 01 Z71, i have put that truck through so much hell it's not even funny and it still runs like a champ with 210K miles on it. Sure the horn doesn't work, the hazard button is jammed down and constantly ticking, and the windshield wiper only goes up to speed 3. But i love the truck because it is mechanically sound and has never let me down once.

 

 

idk what it is about the 99-02 style trucks. i know they are the same as the 03-07 but they just seem to last longer

that is so true, it's just something about them! There such a strong truck, I plan on keeping mine forever

 

 

Sent from my smartass iPhone using Tapatalk

Posted

I have a 2004 with 136K miles and it has had some of the ususal 800 series problems. Intermediate steering shaft, blower motor resistor, and lucky lucky me, I got stuck with the Castech head problem. I don't think the Castech problem has occured in large numbers, but I think it is a little more common than not. I've had one O2 sensor go south at 126K or so. I consider that a normal wear item not really a problem or issue. The next maintenance item that I need to take care of is replacing some rusty brake lines. My inlaws have a 2004 2500 and they just had a brake line go on theirs. The lines failed while pulling their horse trailer. Lucky for them they failed at the destination.

 

With 136k I'm expecting the fuel pump to fail soon. I had a 1999 Chevy Astro van and the fuel pump died with about 120K and my sons 2001 S-10's went at about 140K. If this truck is like any of the other GM vehicles I've owned, the altenator should be going soon as well.

 

The truck is runs smooth as silk, does everything that I ask it to do, and I firmly believe I've gotten good value for the money I spent on it. My plan is to take it well past 200k. I don't use it as my DD, anymore so I should have it a good long time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • So you're saying toss the baby out with the bathwater? @txab posted article was her take on how AI can be used to manipulate pricing as it already does and has been rebuked by the judiciasry in housing. How AI can be and is used to maximize refinery or even Amazon operations all of which are true but because she is who she is; that makes what she says about what is true, false? Is that something akin to Pre-justice aka prejudice?    Look, I'm first in line to approach all information with caution just because we live in a world where people like to lie about someone or something with such a straight face and in such volume that it makes digging to the truth wearisome. Meaning I understand the skepticisms but if I were to toss out everything a person is for a view they hold then my pool of people to draw wisdom from would be non-existent and I'd be forced to reinvent the wheel daily. Not practical.    "Be innocent as a dove but as cautious as a serpent."    Test each word. Every good lie is part truth or no one would believe it. Find the truth in it and reject what isn't.    On this one, AI is being used to do what has been done by hand for hundreds of years already but at such speed, the point of a computer, that it is more easily monetized. This one wasn't that hard a lift.    I wrote a few formulas in a Lotus 123 program decades ago, a series of linked Macros actually, that allowed a daily inventory to be turned into a running P&L and production plan. Something that took three departments a week to assemble now took the time it takes to input the 'daily changes' in inventory. Later that was ungraded to the more powerful Excel program an and integrated with bar code scanning, inventory to supply was done once per shift. It had a huge impact on production scheduling, Seamless interruption flexibility, inventory error reduction, raw materials cost effective utilization and scrap reduction. Huge improvement in the bottom line. I spent months on that and AI could have done it in minutes. So yes, it not only can be used, they would be foolish to not try. The legality, ethics and morality are not the domain of AI. Humans need to keep a reign on it. 
    • New to this forum.  Also looking to tune a 6L80 and trying to work out all the issues in my transmission swap.  I have a 6.2 diesel (1983) and have removed the TH-400 and about to put in a 6L80 with a TCM-2600 interface and don't have a clue what I doing after that.  Did you (Leatherneck/RAV3) get your slip resolved? I too hate to spend that kind of money on a tuner that hopefully I will not need too many times although from what steelerdude15 added about the HP Tuner being great for diagnostics would be a plus.  I am also from WNC but below you in Columbus.  Any helo would be greatly appreciated.  
    • Sounds like a smart reasonable person with common sense. Bill O’Riley never said he was just a journalist, by the way.
    • It's like saying Bill O'Reilly is "just" a journalist.         Lauren Fix, widely known as "The Car Coach," is a prominent automotive journalist, television personality, and self-identified conservative. She is a frequent contributor to right-leaning networks and platforms, offering commentary that intersects the automotive industry, consumer economics, and conservative political perspectives. [1, 2, 3] Media and Commentary Network Contributions: Fix serves as the National Automotive Correspondent for Newsmax and is a frequent guest on Fox News and Fox Business. Video Platforms: She has contributed to PragerU, where she has hosted videos critiquing government mandates on vehicles. [1, 2, 3] Core Positions Anti-EV Mandates & Fuel Policies: Fix regularly critiques government subsidies and mandates for electric vehicles (EVs), framing them as impractical and burdensome to the average consumer. She advocates for consumer choice and supports traditional internal combustion engine vehicles. [1, 2, 3] Economic Analysis: Her commentary often emphasizes the impacts of fuel prices, inflation, and federal regulations on drivers. [1, 2, 3] Political Alignment: On her public channels, she actively supports deregulation, "drill baby drill" energy policies, and the removal of government restrictions on auto sales and manufacturing. [1, 2] For analysis from Lauren Fix on how consumer automotive choices can align with political leanings:
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...