Jump to content

Chit chat


SarahsGMC

Recommended Posts

Posted

What a bad deal - sorry to hear.

  • Replies 9.5k
  • Created
  • Last Reply
Posted

Wow brother that's unfortunate. You in my prayers. Are you guys suing the daycare for the accident?

Not planning on it, they have even been back because they like it there. I am wondering now what kind of liability insurance they have. There was a long block, oddly shaped and was probably part of something, say about 36 inches long, a foot wide, leaning against a banister next to an indoor slide that is about 4 feet high, and the banister is maybe 18 inches high, in an indoor playset. The block was just leaning on the banister like a teeter totter. My son started laying on the block and teetering it a little, slowing bouncing. A second kid came up behind him when the block was teetering and grabbed the part by my son's feet and flipped it up and over the banister, along with my son head first. The whole thing happened in about 6 or so seconds.

Posted

If new ones keep blowing, your motor is drawing too many amps. Time for a new motor.

Posted

So my Pekingese has been described when she is angry as "Demon Dog" by an in law and a neighbors yard guy said she "is the meanest dog I have ever seen in my 20 years of dealing with dogs"(she is extremely sweet to anyone she knows, but hates that yard guy, one neighbor, nearly all children, and ANY OTHER ANIMAL OF ANY TYPE). Well the neighbor she loves(he spoils her pretty bad) got a teacup Yorkie and she isn't too pleased with the super gentle mighty mouse. I go over to pet the pup through the fence every time I see her, while dog acts like she is going to eat it. Today, same thing, my 18 pounds of hellfire is trying to pull our fence down while I am petting the pup and the 1 pound pup just walks up and licks my dogs nose.

Posted

Wow brother that's unfortunate. You in my prayers. Are you guys suing the daycare for the accident?

Dimwit lawyers gotta eat too, right? jeez Louise

Posted

That's a S10 Blazer trait! Ball joints & tie rod ends yearly, along with brakes. Steering box is probably all worn out too, along with the pitman and idler arms. Do it all if you want decent steering.

 

I parted out a '00 Jimmy, and threw the engine (sans electronics) into my '89 S10 Blazer. The weekly check engine lights and electrical problems suddenly went away.

 

I actually still have that Jimmy ...

 

The steering is fine in town, but once its up to highway speeds and on a mild rough road it get real loose. Nothen is clunking or chattering and the co worker I bought it from has had it maintained by a mechanic all its life...the mechanic claims everything is good on it lol

Posted

headed to charleston this afternoon for the 4th! cant wait to get out of work and enjoy the long weekend! hope yall have a great time as well whatever it is u are doing!

  • 2 weeks later...
Posted

A little rant from an old guy. I've been spoiled I guess, the last 10-15 years I've been dealing with the same dealership. My local GMC-Hyundai dealer, GMCs for me Hyundai cars for the wife. I do visit other dealerships to browse, the last two years I've been driving a Santa Fe the wife a Genesis for 7 years. We pretty much been through all their models from the Elantra on up, no complaints just looking for different. Pulled into the Honda dealership across the street. They had about 6 Accords discounted 10K, never saw that before even cheaper than a mid sized Hyundai. Ok I'll bite, let me know my trade value and lets go. So off he goes to the manager. I did even tell him yet how I was going to pay. I look good for my age but still look over 50, and not a car buying virgin. So back he comes with 4K down and over 1200 per month for 36 months. I look at him for a minute stand up and look around. Sale guy says what you looking for? I said the Mercedes emblem, I thought I was buying a Honda. He says we're just getting started I said no we're done, you took a 90 percent certainty to a no sale. I've bought a few vehicles in my day and never seen such an asinine approach in my life. I left out one important part the car I was looking at was hard loaded discounted to 34K

Posted

Nice - I'd have done the exact same thing! $1,200 a month for a friggin Honda?? I know it's a 3-year note, but still ... even after $4k down! :noway: Don't walk, RUN ...

 

Bought 2 vehicles in my life at a dealership - a '94 Honda CBR600F2, and my '07 Silverado. Won't be doing it ever again for a phonebook-sized list of reasons, unless there's a major shakeup in the auto industry. I won't be holding my breath for that one ...

Posted

A little rant from an old guy. I've been spoiled I guess, the last 10-15 years I've been dealing with the same dealership. My local GMC-Hyundai dealer, GMCs for me Hyundai cars for the wife. I do visit other dealerships to browse, the last two years I've been driving a Santa Fe the wife a Genesis for 7 years. We pretty much been through all their models from the Elantra on up, no complaints just looking for different. Pulled into the Honda dealership across the street. They had about 6 Accords discounted 10K, never saw that before even cheaper than a mid sized Hyundai. Ok I'll bite, let me know my trade value and lets go. So off he goes to the manager. I did even tell him yet how I was going to pay. I look good for my age but still look over 50, and not a car buying virgin. So back he comes with 4K down and over 1200 per month for 36 months. I look at him for a minute stand up and look around. Sale guy says what you looking for? I said the Mercedes emblem, I thought I was buying a Honda. He says we're just getting started I said no we're done, you took a 90 percent certainty to a no sale. I've bought a few vehicles in my day and never seen such an asinine approach in my life. I left out one important part the car I was looking at was hard loaded discounted to 34K

Close out sale because the Accord has only a few weeks or months left before the new generation. If you want to know. And since the Accord TOPS out under 36k(my model), you were getting completely ripped off at 34k, if you were looking at a V6, that may have been the reason, Honda is dropping it in the 10th gen Accord in favor of the 300HP Type-R civic engine, but a lot of Honda guys are running to their dealer to get the underrated V6 while they still can. I got them down under 31k with one try. The big deal, though, considering the Hyundai and Kia top out even higher than the Accord, is resale. That was the big reason I went with the Honda. Right now, similarly optioned, the price difference is under 1k. Now go look at 3 year old models, same or similar options. The price difference is 6k between them. Another good thing is Honda branded warranties are DIRT cheap. I got a 8 year 100k bumper to bumper (everything the 3 year covers) for $900(less than a new LED headlight assembly).

 

 

That said we just bought our boys all new furniture. Ended up getting everything needed for the rest of their lives living here, so I don't have to do it again. Trick was they still want to be in the same room(works out, they have a dedicated toy room that way), so got full size bunk beds that can be separated into two beds. Solid wood because they are crazy little boys and would tear up the cheap stuff by accident. The saleswoman was like "wow you have really thought this out".

 

The fun part was the store guys getting it all to fit in my in-laws 800. But it did, two medium/large dressers, full size bunk beds, two full size foam mattresses, and a staircase dresser to climb onto the top bunk, could even close the tailgate.

Posted

Close out sale because the Accord has only a few weeks or months left before the new generation. If you want to know. And since the Accord TOPS out under 36k(my model), you were getting completely ripped off at 34k, if you were looking at a V6, that may have been the reason, Honda is dropping it in the 10th gen Accord in favor of the 300HP Type-R civic engine, but a lot of Honda guys are running to their dealer to get the underrated V6 while they still can. I got them down under 31k with one try. The big deal, though, considering the Hyundai and Kia top out even higher than the Accord, is resale. That was the big reason I went with the Honda. Right now, similarly optioned, the price difference is under 1k. Now go look at 3 year old models, same or similar options. The price difference is 6k between them. Another good thing is Honda branded warranties are DIRT cheap. I got a 8 year 100k bumper to bumper (everything the 3 year covers) for $900(less than a new LED headlight assembly).

 

 

That said we just bought our boys all new furniture. Ended up getting everything needed for the rest of their lives living here, so I don't have to do it again. Trick was they still want to be in the same room(works out, they have a dedicated toy room that way), so got full size bunk beds that can be separated into two beds. Solid wood because they are crazy little boys and would tear up the cheap stuff by accident. The saleswoman was like "wow you have really thought this out".

 

The fun part was the store guys getting it all to fit in my in-laws 800. But it did, two medium/large dressers, full size bunk beds, two full size foam mattresses, and a staircase dresser to climb onto the top bunk, could even close the tailgate.

The Honda was a V6 touring edition. The 4cylinder touring was 24K. I'm now looking at a Camry and VW Jetta, might try Malibu. After 4 Hyundais they appear to be proud of them. Doesn't justify their resale value.

 

 

Sent from my iPhone using Tapatalk

Posted

Been thinking about getting one of those - let us know how it works.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I’m out of ideas on this truck. 2020 Silverado 1500. 5.3 135,000 miles. Has a p0308 and p050d codes. Smokes From exhaust when cold. Compression test passed. New plugs, wires and coil on cyl 8. Same issue. New coil on 8, no change. Replaced injectors, no change. Bore scope showed oil pooled on the piston after sitting overnight. Pulled head and had machine shop check it out. No cracks. Stem seals looked good, replaced anyways. He also ground valve seats. Put it all back together and still have the same issue. Bore scope shows oil on the piston again. Leaning towards maybe a cracked ring but unsure. Cylinder looked good when the head was off, no scoring or scratches. Any ideas on what else I should look for?  Appreciate the help 
    • Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...