Jump to content

Recommended Posts

Posted

I've heard that you should NOT use a pressure washer on them or the carpet will start to come loose. What the hell? Another wonderful feature that belongs on cars and SUVs, not pick-up trucks.

 

Unless it specifically says that in the manual, GM can expect to be replacing these on many trucks. Maybe after a few thousand they'll replace them with the plastic ones.

Posted

These new trucks are a downright let down, the factory rocker guard finish looks terrible IMO... I'd never want that on my truck ever, makes it looks like an old bomb someone is trying to make last for another year

 

I didn't even notice the rocker paint until I detailed the truck. Doesn't bother me at all. I think its a great idea.

  • Like 1
  • 3 months later...
Posted

I added the Chevy rear wheel wells carpeting to my new truck because the roads are very bad in Connecticut especially in the winter. When I first saw the material that was used, I was wondering how long these wheel well liners would hold up. I was debating to go with this product or have my sprayed in bed liner company spray the wheel wells instead. I might have made the wrong decision after reviewing the news as to how Connecticut treats the roads in the winter. After seeing this, I am not sure if there is any way to protect the underneath of your vehicle. Does anyone know how long these carpet wheel wells actually last? These carpet wheel wells will be taken a beating here in Connecticut. Maybe we will have to go back to undercoating. How are other states treating their roads? Every time I wash my truck their is a lot of salt stains in the driveway even with little use of the truck. Where is the GM testing for these conditions? The amount of money these trucks go for should have better quality products in this area.

 

Check out the videos:

 

http://www.wfsb.com/story/23874231/mechanics-blame-winter-road-treatment-for-damage-to-cars

 

Update:

 

http://www.wfsb.com/story/24849790/lawmakers-to-discuss-potentially-corrosive-road-chemicals

Posted

Our Toyota Sienna has them too. Several manufacturers have been using them over the past couple of years. I personally am not worried about them not lasting as long as i either own either vehicle, or the life of the vehicle. The secret is try to keep the underside of your truck clean to prevent rust/or deterioration of the liners.

  • 1 month later...
Posted

I just wanted to give a quick update. My 2007 Silverado LTZ came with plastic liners. I pulled them out since I knew that my new truck is a 2014 Work Truck would not have any liners.

 

I was able to make the plastic liners fit in my 2014 with just a little trimming. So just an option for those that do not like the carpet the 2007-2013 plastic ones will work in the 2014.

  • Like 1
Posted

What's the best way to get dried mud out of this liners

My wife's beetle has the carpet also and it's a carpet liner like the trucks. In Germany most of the cars have the same stuff in the wheel liners and have been using them for years. I have been cleaning her car with a pressure washer or strong hose. It work good and no problems yet. I use the general pressure tip.

Posted

I just wanted to give a quick update. My 2007 Silverado LTZ came with plastic liners. I pulled them out since I knew that my new truck is a 2014 Work Truck would not have any liners.

 

I was able to make the plastic liners fit in my 2014 with just a little trimming. So just an option for those that do not like the carpet the 2007-2013 plastic ones will work in the 2014.

 

Now that is a help. the 7-13 full liners covered more frame too. I have them on my 09 and really like how they clean up. You can even detail them if one is into such. This is the solution for anyone not liking the limited cover and carpet like material of the 14s.

Posted

 

Thing is, everyone who owns a ford and dodge love it, way more then half of them trucks sold have a console shifter and it's there because the customers want it... My GMC doesn't give me ooodles more storage space then a Ford does, it's about the same... I'd LOVE to have one in my GMC

 

Only people that seem to hate it are the GM crowd because they have never had it, everyone else loves it... Atleast offer it in the high country and denali, those customers are the same customers buying limited, plaitnum's, longhorns who are looking for this sort of thing

Well, just my thought on this console shifter thing being that I own 2 GM trucks. 1 with a console shifter and 1 without. In a performance type truck, the console shifter has it place and that is why GMC put one in the GMC Syclone. In the Syclone the shifter just looks right. In the 2014 not so much even if your truck has the bucket seats with console as mine has. The area that the console covers is on the large size side and to add a shifter there and make it look right would be a lot of work. Most likely it would have to be one of those Ed Big Daddy Roth Shifters just to look right in these trucks. A friend of our has a Ford truck with the console shifter and that is the 1 thing that she hates about it.

 

I really like the carpet looking wheel wells and so far it has been really easy to clean them with just the hose.

Posted

A friend of mine has the "carpeted" wheel wells on his Chrysler 300 sedan and his wifes Toyota Highlander. He told that he coats the wheel well liners with TIRE-FOAM and it serves two purposes. 1. It makes the dirt, sand, salt wash off very easily at the car wash. and 2. It makes the liners look nice and black. He's been spraying them with tire foam for over 3 years and says it works great.

Posted

Been wondering where to post this, seems appropriate here.

 

I've noticed that if you take a relatively stiff brush and knock the dry grit off of the liners before you hit them with any water, a very large portion sweeps right off rather easily. Now, if you do get them wet, seems to me like the small, sandy particles really like to stick a lot harder and have to be removed with significantly more elbow grease.

 

Which I don't like as my left elbow is fresh out of grease, and my right is running low.

  • Like 1
Posted

Did not read all the thread so it may have been posted. a GM regional rep told me they did it so mud, etc would not stick and drop off easier. I know a lot of cars are doing this now also.

 

Having raced motocross for 20 years, in heavy mud races we would put on fenders with foam we glued on, as it stoped the mud from building up and adding all the extra weight. So it has some logic I can confirm to some aspect.

 

That noted I hope it is tough as it does seem like it could come off. Time will tell.

  • 3 months later...
Posted
Posted

The GMT900 accessory rear liners fit the K2XX with minor trimming, and the frame is covered! A couple of members took the liners from their old trucks and tried them on their new trucks, and they fit.

 

I have them on my '13, and they are a wonderful accessory that cleans easily, and keeps the fenderwells from being destroyed by rocks, sand and gravel.

Posted

My 2012 maxima had this in the wheels as well. Never been a problem for me. Of course I only kept it 18000 miles so it wasn't like a real test

 

 

Sent from my iPad using Tapatalk

  • 3 weeks later...
Posted

I would have to disagree aswell .The gmc's look completely different than the previous body style take a better look. As for the tires I have never had an issue with them. Cheap interior are we talking about the previous body style ? Ill let u sit in mine verses last years model and see if u come to another conclusion. Bumpers are actually functional and go with the theme of the truck. Dodge and ford can't touch this truck right now trust me I've looked at both several times. Ford used to have the nicer interior but not any more. Dodge on the other hand I mean need I say any more?

It's not dodge anymore it's Ram and it's a nice truck. But I came from a gmt 900.some things I liked in my Chevy and other things I love in my Ram. The Ram is more sophisticated and powerful. It has a beautiful ride and a nice interior. Power train and suspension are amazing. Some interior things I could leave out. I wish GM would just condense resources and make one truck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,193 Guests (See full list)


  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...