Jump to content

Recommended Posts

Posted

b98ed3b62fdc2970fb93d439d7209275.jpg 7" RCX Suspension lift, 35x12.5x20 Nitto Trail Grapllers , 20x10 Fuel Pumps

 

 

2014 GMC Sierra 1500 A/T SLT

Awesome truck dude! Would you mind posting some more pics of it down the side? Plus what offset are you running?

 

 

Sent from my iPhone using Tapatalk

Posted

My plans are to do a 4.5 Zone Lift keeping my Bilstein 5100's in front and back. I currently have rear air bags which I plan on keeping as well I just have to fab up a rear spacer. For wheels I plan on keeping my factory 22's and running 285/55R22 Nitto Terra Grapplers. I spoke with Zone about how much wider the front wheels will stick out and they said 1.85" so I will run rear spacers to keep front and back tracking even.

 

Has anyone done a lift and kept air bags out back? I would be interested in hear how you did it.

 

Thanks.

Cliff

I have almost the same set up.

 

I have a Zone 4.5, w pro comp shocks ( ordered Bilstein but where back ordered forever) and I have Firestone airbags in the rear. wheels are Black Rhino Sierra 18x9 12 offset and General Grappers 35x12.5x18. They did get a spacer for the airbags, but I did get to keep them. I hate sagging when I tow. I keep about 20psi at all time to help smooth out the ride, and it does give a very little rake.

 

Hope that helps.

  • Like 1
Posted

anyone running the rough country 3.5" suspension lift? any issues with ride quality with the 3 inch block in the rear?

Before I did my lift, I was running The RC 2.5 and 3" blocks. No issues. Just a slight rake.
Posted

How is the ride/noise with the Generals and or the air bags? I wasn't planning bags, but I do like the look of a little rake.

Now that I have had them on a bit, the tire noise has increased.

 

ae235340a6ad471ff8652bb94b892507.jpg

 

This is one of my toys. I completely rebuilt and it has 35's and it is actually alot more quite than my truck. Could be I have dynamat in the roof, doors, and floor. But the Grabbers have picked up some noise...

Posted

I have almost the same set up.

 

I have a Zone 4.5, w pro comp shocks ( ordered Bilstein but where back ordered forever) and I have Firestone airbags in the rear. wheels are Black Rhino Sierra 18x9 12 offset and General Grappers 35x12.5x18. They did get a spacer for the airbags, but I did get to keep them. I hate sagging when I tow. I keep about 20psi at all time to help smooth out the ride, and it does give a very little rake.

 

Hope that helps.

Do you any pics of the truck? Any pics of the spacers for thr airbags?

Thanks

Cliff

Posted

Awesome truck dude! Would you mind posting some more pics of it down the side? Plus what offset are you running?

 

 

Sent from my iPhone using Tapatalk

-24mm offset. Will take pics later today

 

 

Sent from my iPhone using Tapatalk

Posted

Do you any pics of the truck? Any pics of the spacers for thr airbags?

Thanks

Cliff

I lost all of them on my phone, trying to upgrade my SIM card. I will snap some and pm you tomorrow.
Posted

I lost all of them on my phone, trying to upgrade my SIM card. I will snap some and pm you tomorrow.

Thanks.
Posted (edited)

Bds?

Did someone say BDS?

 

6" kit with coilovers and new leafs

f87cdd6ed83c55cde0a87b8dbaa061ff.jpg

 

ba0ea7354d3047d45cf6bc67e6bee56c.jpg

 

Nice flat CV angles too!

17c0126b9730ed15c8cf5e8faeb36b45.jpg

 

ea0524008c665b0444295fdec87533fc.jpg

 

 

-24mm offset. Will take pics later today

 

 

Sent from my iPhone using Tapatalk

I've got -24 mm offset as well and love the look! It's pretty funny driving in the rain and seeing water shoot up vertically in front of your mirrors.

Edited by crafferty
  • Like 4
Posted

Did someone say BDS?

 

6" kit with coilovers and new leafs

f87cdd6ed83c55cde0a87b8dbaa061ff.jpg

 

ba0ea7354d3047d45cf6bc67e6bee56c.jpg

 

Nice flat CV angles too!

17c0126b9730ed15c8cf5e8faeb36b45.jpg

 

ea0524008c665b0444295fdec87533fc.jpg

 

 

 

I've got -24 mm offset as well and love the look! It's pretty funny driving in the rain and seeing water shoot up vertically in front of your mirrors.

 

Beautiful looking truck.

Posted (edited)

Did someone say BDS?

 

6" kit with coilovers and new leafs

f87cdd6ed83c55cde0a87b8dbaa061ff.jpg

 

ba0ea7354d3047d45cf6bc67e6bee56c.jpg

 

Nice flat CV angles too!

17c0126b9730ed15c8cf5e8faeb36b45.jpg

 

ea0524008c665b0444295fdec87533fc.jpg

 

 

 

I've got -24 mm offset as well and love the look! It's pretty funny driving in the rain and seeing water shoot up vertically in front of your mirrors.

This kit you're running is $3500, so do you plan on off-roading an Mudding or is it just for looks cuz that's super high.

 

My Current Setup,2014 Silverado 2LT Z71,RCX 2.5 Level Kit,NittoTerra 33x12.50R20Lt's,Fuel - Octane D509 20x9 -12 Offset,All Chrome Plasti-Diped

My Up Coming Mod's,McGhauphy's 7"-9" Economy Lift Kit,Federal Couragia M/T's 35x12.50R20Lt's,OEM Tow Mirror's,Bushwaker OE Fender Flairs,Gtr Lighting Led Conversion Kit's 2,200 Lumen(High,Low,Fog),Black Spyder Venom Bull Bar,Iron Cross HD Step's.

Edited by 2014Sandylifted
Posted (edited)

 

Beautiful looking truck.

Thank you.

 

This kit you're running is $3500, so do you plan on off-roading an Mudding or is it just for looks cuz that's super high.

 

My Current Setup,2014 Silverado 2LT Z71,RCX 2.5 Level Kit,NittoTerra 33x12.50R20Lt's,Fuel - Octane D509 20x9 -12 Offset,All Chrome Plasti-Diped

My Up Coming Mod's,McGhauphy's 7"-9" Economy Lift Kit,Federal Couragia M/T's 35x12.50R20Lt's,OEM Tow Mirror's,Bushwaker OE Fender Flairs,Gtr Lighting Led Conversion Kit's 2,200 Lumen(High,Low,Fog),Black Spyder Venom Bull Bar,Iron Cross HD Step's.

 

I got a super sweet deal on my kit and got it installed for about the price you mentioned. I dont frequently go offroading and I never go mudding. But I installed the lift for when I go shooting, hunting, fishing or just goofing around. Plus it does look cool as hell and it rides better than factory with the coil overs.

Edited by crafferty
  • Like 4
Posted

My ride, '15 Silverado LT Z71, 6" Fabtech, 35" x 12.50" 20 Toyo AT II on Fuel Mavericks, 20" x 9" (5" BS). Fits in 7' garage (82 1/2" actual opening height). I have about 1" clearance at top of Onstar antenna, had to cut the radio antenna about 6"-7". Color is Slate Gray Metallic.

 

Reduced%204-5-15%203_zps1gxnsoj7.jpg

  • Like 6
Posted

2014 Silverado 1500 with 7 inch rough country lift. 20x12 -44 fuel hostage with toyo mt 35x12.5r20. Ignore the dirt and salt, haven't had a chance to wash it.

 

post-128822-0-61013200-1428464699_thumb.jpg

 

Does anyone have any example pictures on how they trimmed their wheel wells on the cab? Only examples I can find are on older truck that don't have the extra plastic piece. Thanks

post-128822-0-61013200-1428464699_thumb.jpg

post-128822-0-61013200-1428464699_thumb.jpg

post-128822-0-61013200-1428464699_thumb.jpg

  • Like 2
Posted

My ride, '15 Silverado LT Z71, 6" Fabtech, 35" x 12.50" 20 Toyo AT II on Fuel Mavericks, 20" x 9" (5" BS). Fits in 7' garage (82 1/2" actual opening height). I have about 1" clearance at top of Onstar antenna, had to cut the radio antenna about 6"-7". Color is Slate Gray Metallic.

 

Reduced%204-5-15%203_zps1gxnsoj7.jpg

Looks great! More pics!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...