2014+ Suspension Lifts

[jimmyboy8301]

If you get a chance to get a photo from the side just to see how much the tires stick out, i'd appreciate it! I really want to get the Zone 4.5'' lift with 35's but I don't want to have a rub that I can't fix/trim. Also, you guys suggest the RT's over the MTs? Just noise level? Or ride comfort as well? Thanks!

Best side-ish shot I have on my phone. Zone 4.5" with 305/55s on 20x10s

I'll get a dead on side shot this afternoon

 

 

Sent from my iPhone using Tapatalk

[jimmyboy8301]

 

 

Sent from my iPhone using Tapatalk

[Schaef]

Thanks Wildchevy, your truck looks awesome man. Ill be going with 20x9 with 20mm offset so i dont think mine would be stucking out much. Just need someone to tell me to buy the 35s and risk an easy trim job.

[jimmyboy8301]

Thanks Wildchevy, your truck looks awesome man. Ill be going with 20x9 with 20mm offset so i dont think mine would be stucking out much. Just need someone to tell me to buy the 35s and risk an easy trim job.

thanks!

 

 

Sent from my iPhone using Tapatalk

[Beefjr]

I've got the Zone 4.5 and its done very well. no problems out of it. I dont have any pics of the angles right now though. i'll try to get ya some

Looking to do the same. 14 Sierra SLT 2wd with stock 20 wheels. What tire size are you running and how do you like the kit? Thanks

Edited March 11, 2017 by Beefjr

[Txjose]

If you get a chance to get a photo from the side just to see how much the tires stick out, i'd appreciate it! I really want to get the Zone 4.5'' lift with 35's but I don't want to have a rub that I can't fix/trim. Also, you guys suggest the RT's over the MTs? Just noise level? Or ride comfort as well? Thanks!

Got a few shots for ya...

 

Very dirty but it's too chilly to wash right now

 

Remember i have 1.5" spacers in the rear and nothing up front...

 

All is just ur standard 4" BDS lift with the 35x12.5x20 toyo RTs

 

 

Sent from my SM-G935V using Tapatalk

[Abearclaw]

With the Fox coilovers my truck definitely rode better than stock.

 

Sent from my SM-G930V using Tapatalk

Well yeah I know yours does man lol. So does mine with fox coil overs. But the dudes with a 7" rough country, for example, are smoking something haha

 

 

Sent from my iPhone using Tapatalk

[crafferty]

Well yeah I know yours does man lol. So does mine with fox coil overs. But the dudes with a 7" rough country, for example, are smoking something haha

 

 

Sent from my iPhone using Tapatalk

Probably crack or bath salts, possibly a combination of both lol.

 

Sent from my SM-G930V using Tapatalk

[Rock1500]

Got a few shots for ya...

 

Very dirty but it's too chilly to wash right now

 

Remember i have 1.5" spacers in the rear and nothing up front...

 

All is just ur standard 4" BDS lift with the 35x12.5x20 toyo RTs

 

 

Sent from my SM-G935V using Tapatalk

Did you have to do any trimming for the 35s to fit?

 

Sent from my Pixel XL using Tapatalk

[Txjose]

Did you have to do any trimming for the 35s to fit?

 

Sent from my Pixel XL using Tapatalk

Not one bit of trimming was done. If anything it just rubs the liner a tad in reverse at full lock. It looks wayyy close but everything fits just right.

 

Sent from my SM-G935V using Tapatalk

[Rock1500]

Not one bit of trimming was done. If anything it just rubs the liner a tad in reverse at full lock. It looks wayyy close but everything fits just right.

 

Sent from my SM-G935V using Tapatalk

Very nice. It's a similar setup that I want to get. I want the 4 inch BDS lift. How far out do the tires stick? I read because of the knuckle on the BDS lift that the front is out further than the rears. So I assume they stick out a bit and you need to get fender flares. But from the picks it looks like you don't need that. Maybe if I don't go for as wide as a tire, they will tuck in just nicely.

 

Sent from my Pixel XL using Tapatalk

[Txjose]

Very nice. It's a similar setup that I want to get. I want the 4 inch BDS lift. How far out do the tires stick? I read because of the knuckle on the BDS lift that the front is out further than the rears. So I assume they stick out a bit and you need to get fender flares. But from the picks it looks like you don't need that. Maybe if I don't go for as wide as a tire, they will tuck in just nicely.

 

Sent from my Pixel XL using Tapatalk

The tires stick out about an inch from the fenders. The fronts get pushed out because of the kit and the rears stay tucked inside. I have OCD so i had to space out the rears with a 1.5" spacer to even out the look or i would have gone crazy looking at the difference.

 

Sticking out is all personal preference but i very much like it when the tires stick out just a little.

 

Sent from my SM-G935V using Tapatalk

[gary.smedley]

The tires stick out about an inch from the fenders. The fronts get pushed out because of the kit and the rears stay tucked inside. I have OCD so i had to space out the rears with a 1.5" spacer to even out the look or i would have gone crazy looking at the difference.

 

Sticking out is all personal preference but i very much like it when the tires stick out just a little.

 

Sent from my SM-G935V using Tapatalk

Agreed. I think the tires sticking out a little looks great. If I go with the RCX 5" I'll need spacers for the rear as well.

 

 

Sent from my iPhone using Tapatalk Pro

[sawyer_dowell_3]

Looking to do the same. 14 Sierra SLT 2wd with stock 20 wheels. What tire size are you running and how do you like the kit? Thanks

I was running 295/60/20s and still rubbed at full lock with some trimming.The kit itself was a good kit and could complain. i did have coilovers custom built for the kit so that helped out on the ride. I just traded my truck last week lol.

[Beefjr]

Fabtech 4" lift, 295/60/20 trail grapplers on 20" BMF REPR's

Looks great!! How's the ride any issues with the lift after some time?

Thanks