2014+ Leveling Kits

[TX_AT]

how much do the tires stick out from the side of the wheel well? bought 33" toyo mt's, same exact truck.

They dont stick out at all. If you went with 33x12.5 your tires will be wider than mine.

[dustyt93]

They dont stick out at all. If you went with 33x12.5 your tires will be wider than mine.

yeah i did get the 12.5's. Thanks for sharing though, i appreciate it

[Spurshot]

Anyone running 325/60r18 (33.3"x13") tires with 18x9 wheel (+20 offset 5.75" backspace) on a front only level kit?

 

I figure it's a long shot, but anyone think that would work without rubbing?

 

Love the way those tires look, I'm sure it'd be fine height wise but 13" is a wide tire.

Im running 305/60-18 on stock AT 18x8.5 wheels. No leveling. No rubbing. I dont know if you can do what you're thinking. It'd be close.

[BlueWrapper]

Im running 305/60-18 on stock AT 18x8.5 wheels. No leveling. No rubbing. I dont know if you can do what you're thinking. It'd be close.

 

Yep, your new tire thread is what makes me think it might actually work. If you're getting 12.1 width under there with no level, an extra 2.5 level might allow that extra 0.9" width.

[Full Lock]

325s will rub just don't know where and how bad

[Spurshot]

I put in some 3/4" lower spacers to get 1 1/2" lift. 38 1/4" front, 39 1/2" rear fender height. With the 33s it picked up the front a total of 2". I think I'm about where I want to be with it.

 

 

Edited May 14, 2014 by spurshot

[Full Lock]

Looks good and cute pups. You'll prob have a very nice stance with a hefty load.

 

With my truck only being 1/2-3/4" higher in the rear, I know I'm going to be pointed to the sky towing or hauling a heavy load. I see helper springs in my future

[Spurshot]

The guys at the shop were able to slip the blocks in without disconnecting anything other than the two bolts on the coilover lower attach. Didn't even take the wheels off.

 

If I'd have had my dogs with me when that blond was checking out my truck, she'd have been putty in my hand.

[Jtanner129]

2" RC Leveling Kit with 20" OE machined black wheel and 275/60R20 Falken Wild Peaks

 

 

 

Edited May 15, 2014 by Jtanner129

[TB3546]

2" Rough County leveling kit, with 275/70/18 BF Goodrich TKOs. I'm contemplating getting 1/4" or 1/2" spacer plates to get a little more width. Anyone have experience with he plate spacers??

[meyer276]

I have a 2.0" skyjacker levelling kit on my sierra and want to get new wheels soon but don't know what size of tire would fit and how wide I can go without rubbing a lot. I want 18" wheels. Anybody have any ideas?

[scoobyd3w]

...

Edited May 16, 2014 by scoobyd3w

[Spurshot]

I have a 2.0" skyjacker levelling kit on my sierra and want to get new wheels soon but don't know what size of tire would fit and how wide I can go without rubbing a lot. I want 18" wheels. Anybody have any ideas?

 

You can get 305/60-18 (marked 12.50x33, actual 12.1x32.64) tires on stock RT5 All Terrain wheels (18x8.5) without rubbing. see this thread. http://www.gm-trucks.com/forums/topic/161086-cooper-st-maxx-30560-18-121x326-18-no-levellift/

[Guapoh]

Here is my truck with 1.5" level kit with 285/55/20 Terra Grapplers and factory mudflaps.

That looks great.

[Spurshot]

Looks good and cute pups. You'll prob have a very nice stance with a hefty load.

 

With my truck only being 1/2-3/4" higher in the rear, I know I'm going to be pointed to the sky towing or hauling a heavy load. I see helper springs in my future

 

I still have a snugtop Hi-Liner Sport and a set of aluminum bed drawers to put on the truck. That's about 400 lbs total.

 

The pups are some great bird dogs. The white pointer is a George Hickox dog out of 3 hall of fame trial dogs lineage. Amazing to watch her work. I've gone out without a gun just to let her find birds.