Jump to content

Recommended Posts

Posted

Very clean looking truck! Looks like a lowered truck done right. Is it 4x4 or 2wd?

 

Sent from my SM-G930V using Tapatalk

 

It is a 2wd

Posted

 

It is a 2wd

In this case that's great. Usually lowered 4wd trucks are hacked up. If you don't mind me asking what did you pay?

 

Sent from my SM-G930V using Tapatalk

Posted

 

Badass. :thumbs:

This is my cup of tea. The lowered looks great, but this is just right to me!

  • Like 2
Posted

E8ECCD96-44E7-4F1F-B794-FF9A80C01FA8_zps8CB7B838-C49D-41D0-87A7-3F21DB69F443_zpsMy contribution to this thread, no "grandpa mods".

2015 Gmc Sierra Slt 2wd

Fox 2.0's front and rear, Cognito Uca's, Weld Cheyenne 17x8.5 and MT Mtz 33x12.50's.

Great looking setup!

Posted

How do you all like this one!! c75bee8d5063914d08314e61a4c8b79e.jpg39913da1631d26c2866540074424d726.jpg

I think it looks great. I'd prefer the wheels not to have the red face plates, but your truck does pull it off well.

 

I'd rather look at and drive a truck like this with a nice lift and clean wheel tire combo and nothing else than a leveled truck with stock wheels and a light pods and bars, and steps, and mud flaps and what ever other crap hanging off it.

  • Like 1
Posted

Here is my 2014 Silverado High Country that I picked up a few months ago. I am not into lowered trucks with big wheels but I just could not pass up the deal I got on this. My friend is the used car sales manager at Planet Ford in Spring, Tx and they got this truck on trade in and couldn't sell it at the dealership because it had too many mods and no catalytic converters so he gave it to me for wholesale!

 

The truck is "UNDER CONSTRUCTION".

I will be raising it back to stock height with a leveling kit or maybe a 3.5in- 4in lift

Adding the 22in OEM Ck158 wheels (if I can ever find a set) LET ME KNOW IF YOU CAN!

Adding a muffler to it because it currently has long tube headers with a small resonator. SUPER LOUD but going to sound nice when I tame it.

 

The front end is also a 2500 conversion. Haven't even taken the Duramax badges off yet.

 

 

 

LET ME KNOW WHAT YOU THINK! Remember this isn't my style but it does look pretty awesome as it stands.

 

 

 

 

15994649_10211960525232240_4567871161622768899_o.jpg 15972487_10211960524912232_5298853879203725209_o.jpg 15875203_10211960525432245_8490744396048803925_o.jpg 15936472_10211960534712477_2833204966629374076_o.jpg 15937038_10211960528792329_8058973411876891848_o.jpg

Looks great, makes me want to do a 2500 front clip swap.

  • Like 1
Posted

I think it looks great. I'd prefer the wheels not to have the red face plates, but your truck does pull it off well.

 

I'd rather look at and drive a truck like this with a nice lift and clean wheel tire combo and nothing else than a leveled truck with stock wheels and a light pods and bars, and steps, and mud flaps and what ever other crap hanging off it.

EXACTLY

 

 

Sent from my iPhone using Tapatalk

Posted

My 2017. I just finished installing 5100's front and rear. Let the addiction begin!

4d5ff18b490823d1116757a9c66ecfa7.jpg

 

 

 

Sent from my iPhone using Tapatalk

  • Like 3
Posted

E8ECCD96-44E7-4F1F-B794-FF9A80C01FA8_zps8CB7B838-C49D-41D0-87A7-3F21DB69F443_zpsMy contribution to this thread, no "grandpa mods".

2015 Gmc Sierra Slt 2wd

Fox 2.0's front and rear, Cognito Uca's, Weld Cheyenne 17x8.5 and MT Mtz 33x12.50's.

What is the wheel offset?

  • Like 1
Posted

What is the wheel offset?

 

looks good . your tires are they the same as 285 ???

Posted

I think it looks great. I'd prefer the wheels not to have the red face plates, but your truck does pull it off well.

 

I'd rather look at and drive a truck like this with a nice lift and clean wheel tire combo and nothing else than a leveled truck with stock wheels and a light pods and bars, and steps, and mud flaps and what ever other crap hanging off it.

 

That is a clean combo, car rims in a massive size with stretched tires? I guess it's clean because it doesn't get used :dunno: I bet it drives real nice though :crackup: Atleast that other stuff you listed is actually mostly useful and can help the truck in doing oh I dunno truck stuff....

 

To each their own though, pretty easy to spot what owners do and use their trucks.

 

Tyler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...