kstruckcountry's 2006 Silverado Z71

[white1500]

The headlights don't look too bad, maybe try toothpaste in the meantime? And sooner or later just get new housings and be done with it imo. I have a neighbor with a 99-03 2500 with new housings all across the front end and it looks amazing, which matches the rest of the truck since it's in great shape.

 

And how does the engine cooling do with the front bumper?

 

Sent from my SM-G360V using Tapatalk

[kstruckcountry]

I'll look into the kits, I really like these and they're aimed perfectly so.... Very bright for stock lights, and the bulbs are the ones that came with it 5 years ago, really reliable.

 

I've never noticed any cooling issues, around town when it's hotter and stop and go I think I've seen 208F. Usually in the summer on the highway it hovers around 202F. Trans temp usually runs ambient temperature + 90F, sometimes a touch more.

 

Sent from my SM-G920V using Tapatalk

[kstruckcountry]

I'll update with a picture of my new tailpipe setup. I got tired of looking at the factory tailpipe. It's tucked up enough now that it isn't really visible, but doesn't leave exhaust under the pickup. Pretty similar to how it is on the SUV's.

 

[kstruckcountry]

Update: 141,xxx miles

 

I painted the frame with semigloss POR-15 after wire wheeling it. Quite the job.

 

I also installed a RC steering stabilizer. It makes a noticeable difference on rutted pavement and rough dirt roads.

http://www.roughcountry.com/steering-stabilizer-87326-20.html

 

After 42,xxx faithful, flat free miles from the Cooper ATPs, I got some new Cooper ATWs.

[Full Lock]

Nice man! Frame looks fantastic and those tires should do great in the snow.

 

Oh do you have pics of the steering stabilizer installed? I've been thinkin about picking one up.

[kstruckcountry]

Nice man! Frame looks fantastic and those tires should do great in the snow.

 

Oh do you have pics of the steering stabilizer installed? I've been thinkin about picking one up.

I'll get pictures. It's a pretty simple setup.

 

Sent from my SM-G920V using Tapatalk

[Daryl LBZ]

Does that stabilizer bolt right up with everything being stock?

[kstruckcountry]

Does that stabilizer bolt right up with everything being stock?

Yeah, it bolts to driver's side front lower A-arm mount and the midlink. I'll get pictures tomorrow.

 

Sent from my SM-G920V using Tapatalk

[Daryl LBZ]

Yeah, it bolts to driver's side front lower A-arm mount and the midlink. I'll get pictures tomorrow.

 

Sent from my SM-G920V using Tapatalk

Awesome! Looks like I've found my next purchase.

[kstruckcountry]

Here you go guys, this is how the stabilizer bolts up.

The hole for the smaller bolt is the only drilling I had to do. Hope I didn't void the warranty.

[kstruckcountry]

Also another tire picture, it doesn't really show how grippy they are, but how the sidewalls look. I'm really happy with the grip from these so far. Running at 55 psi front 45 rear.

[kstruckcountry]

Thought I'd post an update on the tires. I was in the mountains and got over 5 feet of snow. The tires did awesome, they have about 2000 miles on them now. Buddy has KO2s and the difference was noticeable, especially under braking.

 

The funny thing is, I still haven't put in the balancing beads, and they don't vibrate. So somehow I managed to get 4 perfect tires? Crazy. I'll put the beads in this weekend and see if I notice a difference.

 

[white1500]

Why are you running your tire pressures that high?

 

Sent from my SM-G550T using Tapatalk

[kstruckcountry]

They're 10 ply, so going by the load rating and pressure of the OE tires it pro rates to about that. I could probably run a hair less, but the ATWs are a very smooth and grippy tire so far, so I haven't felt a need to lower it.

 

The balancing beads did make a noticeable difference. For $30 I'm pleased, and won't be going with conventional balancing again.

 

Sent from my SM-G920V using Tapatalk

[LongrangeLauber]

They're 10 ply, so going by the load rating and pressure of the OE tires it pro rates to about that. I could probably run a hair less, but the ATWs are a very smooth and grippy tire so far, so I haven't felt a need to lower it.

 

The balancing beads did make a noticeable difference. For $30 I'm pleased, and won't be going with conventional balancing again.

 

Sent from my SM-G920V using Tapatalk

Where'd you get em for all 4 wheels for $30?

 

Sent from my SM-N920V using Tapatalk