Jump to content

Recommended Posts

Posted

installed my AMP steps, these are the best quality board i have seen everything is aluminum so no rust !

 anyone in the market for a set of WestinX boards i have in the corner of the garage. 

 

 

20171228_150739.jpg

Posted

Put on ICI Magnum RT Steps over the holidays.  I'm very happy with the look and matches my headache rack well. IMG_6751.jpg.91c0a9763969bdac702f85538e3e5554.jpgIMG_6750.jpg.2d462e34623ca478dbaae48a85cfbed0.jpg

Posted

I just ordered my plug-n-play Amp Research steps from AutoAnything for less than $1,200 with overnight delivery!  I'm excited to get these and put them on!

 

I will be selling my OEM 6" chrome running boards in case anyone is interested.  Only been in use for 3 months and look showroom new.

Posted
21 hours ago, lapoolboy said:

I just ordered my plug-n-play Amp Research steps from AutoAnything for less than $1,200 with overnight delivery!  I'm excited to get these and put them on!

 

I will be selling my OEM 6" chrome running boards in case anyone is interested.  Only been in use for 3 months and look showroom new.

I hope you got the plug and play option, it will make your life much easier

Posted
18 minutes ago, RP53 said:

I hope you got the plug and play option, it will make your life much easier

 

21 hours ago, lapoolboy said:

I just ordered my plug-n-play Amp Research steps from AutoAnything for less than $1,200 with overnight delivery!  I'm excited to get these and put them on!

 

I will be selling my OEM 6" chrome running boards in case anyone is interested.  Only been in use for 3 months and look showroom new.

 

  • Like 3
Posted
1 hour ago, lapoolboy said:

 

 

Are they Double Cab or Crew Cab ???

Posted
I just ordered my plug-n-play Amp Research steps from AutoAnything for less than $1,200 with overnight delivery!  I'm excited to get these and put them on!
 
I will be selling my OEM 6" chrome running boards in case anyone is interested.  Only been in use for 3 months and look showroom new.


Just curious on how you did this. I ordered mine last week and paid more than that. They typically don’t accept any discounts for those


Sent from my iPhone using Tapatalk
Posted
3 minutes ago, bwilliams22685 said:

 


Just curious on how you did this. I ordered mine last week and paid more than that. They typically don’t accept any discounts for those


Sent from my iPhone using Tapatalk

 

I just found the lowest price I could online (which was some sketchy website I wasn't comfortable ordering from) and asked them to match it.  They beat the price by $1 AND threw in free overnight shipping.  I just got them an hour ago in fact.

  • Like 1
Posted
3 hours ago, lapoolboy said:

I just found the lowest price I could online (which was some sketchy website I wasn't comfortable ordering from) and asked them to match it.  They beat the price by $1 AND threw in free overnight shipping.  I just got them an hour ago in fact.

Damn. Wish I would have thought of that. 

Posted

Well, I got the AMP steps installed this weekend....was not really a fun project even with the plug-n-play.  The alignment of the steps against the body when retracted is annoying.  The front of the step is lower from the body than the rear.  Research shows this is common on the Silverados.  I like them otherwise.

Posted
On ‎12‎/‎31‎/‎2017 at 10:15 AM, RP53 said:

installed my AMP steps, these are the best quality board i have seen everything is aluminum so no rust !

 anyone in the market for a set of WestinX boards i have in the corner of the garage. 

 

 

20171228_150739.jpg

No rust, just corrosion! just kidding but, they wouldn't last long in my climate :(

  • Like 1
Posted
18 hours ago, tanner709 said:

No rust, just corrosion! just kidding but, they wouldn't last long in my climate :(

Mine are on their 3rd nasty winter without any problems.  And the stuff they put on the roads in PA is some of the most corrosive around!

 

Just keep them clean and spray the joints with some silicone lube and they work great!

  • 3 weeks later...
Posted

Has anyone installed a set of the Go Rhino RB20s? was looking at these as a more minimalist approach and tossing the drop step onto the passenger side for the GF. Thanks.

Posted

Anyone try Realstep or a similar product? It is a metal step that attaches to your standard 3" nerf bars.

Realstep Step Pad Replacement Kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
    • Looks nice. I still have my 2000, 1500. Bought a 2025, 1500 for retirement. Feels solid. These trucks have a bad rap on the internet. My brother has a `24 1500, 5.3 with 52,000 miles. No problems at all. Mine hasn`t either but mine`s only at 12,700 miles. Have seen some of these things with 100,000 miles with no problems.
    • Howdy! New to the forum of course! My name is Casey, just picked up a 2024 high country midnight edition. First “new” truck in 24 years for me. Driving a 1998 Z71 since 2002. Have been on the GMT400 forum with lots of good info and help there. Nervous about driving these newer trucks and all their electronics…. Did a lot of work on the Z71 myself over the years. New truck is definitely a nice upgrade after 24 years. Photo of the old and new, still keeping the Z71 - has 320,000 miles on her and still running well!  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...