What have you done to your K2 today?

HCSilvey · May 16, 2018

Nice! Thanks! How did you mount yours??
Also they come in black too

2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

I fabbed this mount. It’s black acrylic with an aluminum strap and stainless hardware. It just mounts around a leg in the grille.

Sent from my iPhone using Tapatalk

jimmyboy8301 · May 16, 2018

I fabbed this mount. It’s black acrylic with an aluminum strap and stainless hardware. It just mounts around a leg in the grille.

Sent from my iPhone using Tapatalk

That’s pretty ****in cool!!! I like it.

2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

HCSilvey · May 16, 2018

@HCSilvey , where in Cali you at? I do miss it there.

I’m in Palm Springs. But my company is about to relocate me to Pennsylvania. That’s going to be a climate shock Lol.

Sent from my iPhone using Tapatalk

jimmyboy8301 · May 16, 2018

I’m in Palm Springs. But my company is about to relocate me to Pennsylvania. That’s going to be a climate shock Lol.

Sent from my iPhone using Tapatalk

Where in PA?

2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

HCSilvey · May 16, 2018

Where in PA?

2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

The job is actually in Pennsauken NJ. But I’m looking for a place in PA.

Sent from my iPad using Tapatalk

jimmyboy8301 · May 16, 2018

The job is actually in Pennsauken NJ. But I’m looking for a place in PA.

Sent from my iPad using Tapatalk

That’s literally 15 minutes from me lol

2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

Marv88 · May 16, 2018

On 5/13/2018 at 12:43 PM, Waaazooo said:

Anyone have a preferred non “dynamat” brand sound deadened? I’ve used Raamat in the past but the website sucks and the owner turned douche when I tried to order for my 1500.

Sent from my iPhone using Tapatalk

He happens to be a personal friend and if you let me know what's wrong with the website as well as what trouble you had ordering by phone I'll let him know (he has someone else taking orders these days)

Marv88 · May 16, 2018

Made 2 unintentional "mods" in one day...While backing into a space at the store I looked down for a split second when i heard the ding for a text, missed the curb stop and hit the wall. Slight bend to the rear bumper and a little scrape to the plastic but not too bad (text was from Nasty on the forum here so I'm blaming him! )

Next I was in the drive through at BK but changed my mind so I backed up. Didn't quite back up far enough and when I turned where I thought was the end of the lane the left front went over a higher than typical curb and she's pulling to the right now. Since I have to get it aligned anyway this may be the motivation I needed to finish the lowering now so I don't have to align it twice.

Waaazooo · May 17, 2018

He happens to be a personal friend and if you let me know what's wrong with the website as well as what trouble you had ordering by phone I'll let him know (he has someone else taking orders these days)

Go to his website. You can choose a small car to a large van. It tells you 1-19 sheets of BXT and a sheet of ensolite. If you go to the vehicle specific section.. well it tells you 1-19 sheets of BXT and a sheet of ensolite. Well which is it? I don’t want to guess, tell me how much for my truck. I know I’ll need more for my truck than my little car.

He used to be a preferred provider for the Subaru community and they dispersed (because they have to be catered to as a community) to other providers, largely because if I buy this stuff I want to have an idea what’s needed for the job.

You (as the vendor) should have an idea of the sq ft requirement for most of these jobs and it can be parsed out to the trunk and cabin of a car or by std cab vs crew cab.

I’m all about supporting a small company, and he used to be out of a small town in Utah which is a bonus for me. But I’m not going to go out of my way to guess the whole way through his website.

Sent from my iPhone using Tapatalk

Marv88 · May 17, 2018

5 minutes ago, Waaazooo said:

Go to his website. You can choose a small car to a large van. It tells you 1-19 sheets of BXT and a sheet of ensolite. If you go to the vehicle specific section.. well it tells you 1-19 sheets of BXT and a sheet of ensolite. Well which is it? I don’t want to guess, tell me how much for my truck. I know I’ll need more for my truck than my little car.

He used to be a preferred provider for the Subaru community and they dispersed (because they have to be catered to as a community) to other providers, largely because if I buy this stuff I want to have an idea what’s needed for the job.

You (as the vendor) should have an idea of the sq ft requirement for most of these jobs and it can be parsed out to the trunk and cabin of a car or by std cab vs crew cab.

I’m all about supporting a small company, and he used to be out of a small town in Utah which is a bonus for me. But I’m not going to go out of my way to guess the whole way through his website.

Sent from my iPhone using Tapatalk

I measure the areas of the vehicle I'm doing and calculate how much I'll need myself so I never noticed that on the website but I'll give him a call to let him know (the product now comes out of Southern California)

Nasty · May 17, 2018

2 hours ago, Marv88 said:

Made 2 unintentional "mods" in one day...While backing into a space at the store I looked down for a split second when i heard the ding for a text, missed the curb stop and hit the wall. Slight bend to the rear bumper and a little scrape to the plastic but not too bad (text was from Nasty on the forum here so I'm blaming him! )

Next I was in the drive through at BK but changed my mind so I backed up. Didn't quite back up far enough and when I turned where I thought was the end of the lane the left front went over a higher than typical curb and she's pulling to the right now. Since I have to get it aligned anyway this may be the motivation I needed to finish the lowering now so I don't have to align it twice.

We can call it the Brandon mod